BN-LINK 24-Hour Plug-in Mechanical Timer

1. 제품 오버view

The BN-LINK 24-Hour Plug-in Mechanical Timer is designed to automate the operation of various indoor electrical devices. It features a simple mechanical dial with 15-minute intervals, allowing for precise scheduling of ON/OFF cycles over a 24-hour period. This heavy-duty timer is ETL listed, ensuring safety and reliability for a wide range of applications.

Image 1: BN-LINK 24-Hour Plug-in Mechanical Timer, front view.

2. 제품 특징

• 프로그래밍 가능한 일정: Offers 96 ON/OFF settings within 24 hours, with each push pin representing a 15-minute interval.
• 시각적 표시기: A red signal light clearly indicates when the device is powered.
• 간단한 조작: Pins UP means the timer is OFF, and pins DOWN means ON.
• 모드 선택: Features a slide switch to select between 'ON' (continuous power) and 'TIMER' (scheduled operation) modes.
• 다양한 호환성: The three-hole grounded outlet is compatible with both two-prong and three-prong plugs.
• 견고한 디자인: Suitable for automating lamps, Christmas lights, fans, humidifiers, coffee machines, aquariums, grow lights, and other indoor electrical devices.
• 안전 인증: ETL은 안전성을 승인했습니다.

3. 안전 정보

This BN-LINK heavy-duty grounded timer is ETL approved, ensuring it meets recognized safety standards. It is rated for 125VAC, 60Hz, with a maximum load of 1875W, 15A Resistive, 8A Tungsten, and 1/2 HP, TV-5. Always ensure that the total wattage of connected devices does not exceed the timer's maximum load capacity to prevent overheating and potential hazards. Use only with grounded outlets.

4. 설정

1. Reset Pins: Before setting up, ensure all the black push pins around the dial are in the UP position. This sets the timer to an 'OFF' state for all intervals initially.
2. 현재 시간 설정: Rotate the entire black dial clockwise until the arrow on the timer aligns with the current time. The dial is marked with AM/PM hours.
3. 프로그램 켜짐/꺼짐 시간: Push down the black pins corresponding to the desired ON periods. Each pin represents 15 minutes. For example, to turn a device ON from 6 PM to 10 PM, push down all pins between the 6 PM and 10 PM marks. Pins in the UP position indicate OFF periods.
4. 작동 모드 선택: Use the red slide switch on the side of the timer. Slide it to the 'TIMER' position (indicated by a clock icon) for automatic scheduled operation. If you wish to bypass the timer and keep the connected device continuously ON, slide the switch to the 'ON' position.
5. 플러그인: Plug the timer into a standard 3-prong wall outlet. Then, plug your device into the timer's grounded outlet.

Image 2: Visual guide for setting ON/OFF pins and current time.

5. 사용 설명서

Once the timer is plugged in and the current time is set, the dial will continuously rotate clockwise. When the rotating dial reaches a segment where pins are pushed DOWN (ON position), the connected device will receive power. When it reaches a segment where pins are UP (OFF position), power to the device will be cut off. The red indicator light on the timer will illuminate when power is being supplied to the connected device.

Image 3: Diagram illustrating the various components of the timer, including the clock dial, push pins, and slide switch.

이미지 4: 이상view of the timer's scheduling capabilities: 1 grounded outlet, 15-minute intervals, 24-hour programmable, 96 ON/OFF settings.

6. 유지관리

To ensure optimal performance and longevity of your BN-LINK Mechanical Timer, follow these simple maintenance guidelines:

• 청소: 청소하기 전에 타이머의 전원 플러그를 뽑으세요. 부드럽고 마른 천으로 외부를 닦으세요. 액체 세제나 연마제를 사용하지 마세요.
• 저장: 장시간 사용하지 않을 경우, 타이머를 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 점검: Periodically inspect the timer and its plug for any signs of damage, such as frayed wires or cracked casing. If damage is found, discontinue use immediately and replace the unit.

7. 문제 해결

If your BN-LINK Mechanical Timer is not functioning as expected, consider the following:

• Device Not Turning ON/OFF:
  • Ensure the timer is securely plugged into a working wall outlet.
  • Verify that the connected appliance is properly plugged into the timer and is functional.
  • Check the red slide switch on the side of the timer. It must be in the 'TIMER' position for scheduled operation. If it's in 'ON', the device will be continuously powered.
  • Confirm that the black push pins are correctly set for the desired ON/OFF periods. Pins pushed DOWN correspond to ON times.
  • Ensure the current time on the dial is accurately aligned with the arrow.
• 타이머가 진행되지 않음: Ensure the timer is plugged into a live outlet. The internal clock mechanism requires power to operate.
• 과열: If the timer feels hot, immediately unplug it and the connected device. Ensure the total wattage of connected devices does not exceed the timer's maximum load capacity (1875W).

8. 사양

Image 5: Detailed electrical ratings and physical dimensions of the timer.

9. 상자 안에 무엇이 들어있나요?

• 1 x BN-LINK 24-Hour Plug-in Mechanical Timer

10. 보증 및 지원

For warranty information or technical support regarding your BN-LINK 24-Hour Plug-in Mechanical Timer, please refer to the product packaging or contact BN-LINK customer service directly. Contact details can typically be found on the manufacturer's official web웹사이트 또는 제품의 소매 페이지에서 확인할 수 있습니다.