소개
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your TOTAL TP5434411 Gasoline Grass Trimmer & Bush Cutter. Please read these instructions carefully before using the product to ensure proper handling and to prevent injury or damage. Keep this manual for future reference.
안전 정보
전동 공구를 사용할 때는 항상 안전을 최우선으로 하십시오. 안전 지침을 따르지 않으면 심각한 부상을 입을 수 있습니다.
- 매뉴얼을 읽어보세요: 사용하기 전에 모든 지침과 경고를 이해하세요.
- 개인 보호 장비(PPE): Always wear safety glasses, hearing protection, heavy-duty gloves, long pants, and sturdy, non-slip footwear.
- 작업 영역: Keep the work area clear of other people, children, and pets. Maintain a safe distance from bystanders (at least 15 meters).
- 연료 취급: Handle gasoline with extreme care. Store fuel in approved containers, away from ignition sources. Refuel outdoors, with the engine off and cool.
- 점검: Before each use, inspect the trimmer for loose parts, damage, or wear. Ensure all guards are in place and secure.
- 엔진 꺼짐: Always turn off the engine before making adjustments, clearing blockages, or performing maintenance.
- 접촉을 피하다: Keep hands and feet away from the cutting attachment while the engine is running.
- 날씨 조건: 비나 습기가 있는 환경에서는 운전하지 마십시오.
- 피로: Do not operate the trimmer when tired or under the influence of drugs or alcohol.
구성 요소 이상view
Familiarize yourself with the main components of your TOTAL Gasoline Grass Trimmer & Bush Cutter.
이미지 1: The TOTAL TP5434411 Gasoline Grass Trimmer and Bush Cutter, fully assembled, shown with its engine unit, long shaft, handle, safety guard, and two cutting attachments: a 3-tooth metal blade and a line spool. The engine is at the top, the handle is positioned for ergonomic use, and the cutting attachments are at the bottom, ready for installation.
- 엔진 유닛: Contains the 42.7cc, 2HP 2-stroke engine.
- 샤프트: The long pole connecting the engine to the cutting head.
- 핸들바: Ergonomic handle for control and maneuverability.
- 스로틀 트리거: 엔진 속도를 제어합니다.
- 안전 가드: Protects the user from debris and the cutting attachment.
- 절단 헤드: Area where the cutting attachment (line spool or blade) is mounted.
- Line Spool (Trimmer Head): Used for cutting grass and light vegetation.
- 3-Tooth Blade (Bush Cutter Blade): Used for thicker brush and small saplings.
- 연료 탱크: 휘발유와 오일 혼합물의 경우.
설정
1. 조립
- 핸들바를 부착하세요: Securely fasten the handlebar to the shaft using the provided clamps and bolts. Ensure it is positioned comfortably for operation.
- Install the Safety Guard: Mount the safety guard to the lower part of the shaft, above the cutting head. Ensure it is firmly attached and provides adequate protection.
- Select and Install Cutting Attachment:
- For Grass Trimming (Line Spool): Attach the line spool to the cutting head. Follow the specific instructions in the manual for your model to ensure correct mounting.
- For Bush Cutting (3-Tooth Blade): Attach the 3-tooth metal blade to the cutting head. Ensure the blade is correctly oriented and securely fastened with the retaining nut and washer. Always use the appropriate tools for tightening.
2. 연료 혼합
This unit uses a 2-stroke engine and requires a specific mixture of unleaded gasoline and 2-stroke engine oil. Refer to the engine manufacturer's recommendations for the exact mixing ratio (e.g., 25:1 or 50:1). Always use fresh, high-quality fuel and oil.
- 연료는 지정된 용기에 혼합하십시오.
- Pour the correct amount of 2-stroke oil into the gasoline.
- Shake the container thoroughly to ensure proper mixing.
- Fill the trimmer's fuel tank carefully, avoiding spills. Do not overfill.
작동 지침
1. 엔진 시동
- 트리머를 평평하고 안정적인 표면에 놓으십시오.
- ON/OFF 스위치가 "ON" 위치에 있는지 확인하세요.
- (냉간 시동 시) 초크를 작동시키십시오.
- 연료가 보일 때까지 프라이머 벌브를 여러 번 누릅니다.
- Pull the starter cord firmly and smoothly until the engine attempts to start.
- Once the engine fires (or after a few pulls), disengage the choke.
- 엔진이 시동이 걸리고 원활하게 작동할 때까지 시동줄을 다시 당기십시오.
- 엔진이 잠시 예열된 후 액셀 페달을 밟으십시오.
2. Using the Trimmer/Cutter
- 균형 잡힌 자세를 유지하면서 양손으로 트리머를 단단히 잡으십시오.
- Keep the cutting attachment away from your body and other objects.
- For Grass Trimming: Use a sweeping motion, cutting from right to left for optimal debris deflection. Do not force the line into thick vegetation.
- For Bush Cutting: Approach brush slowly and deliberately. Use the lower part of the blade for cutting. Be aware of kickback, especially when cutting thicker material.
- Maintain a consistent engine speed.
- Avoid hitting hard objects like rocks, fences, or concrete.
3. 엔진 정지
- Release the throttle trigger to allow the engine to idle.
- 전원 스위치를 "OFF" 위치로 옮기십시오.
- Wait for all moving parts to come to a complete stop before setting the trimmer down.
유지
Regular maintenance ensures optimal performance and extends the life of your trimmer. Always ensure the engine is off and cool before performing any maintenance.
- 청소: After each use, clean the trimmer, especially the cutting head and air intake vents, from grass, dirt, and debris.
- 에어 필터: Check and clean the air filter regularly (e.g., every 10 hours of operation). Replace if damaged.
- 점화 플러그: Inspect the spark plug periodically. Clean or replace if fouled or worn.
- 연료 필터: Check the fuel filter in the fuel tank for blockages. Replace if necessary.
- 절단용 부착물:
- 라인 스풀: Replace trimmer line as needed. Ensure the correct diameter and type of line is used.
- 잎: Inspect the blade for sharpness and damage. Sharpen or replace dull/damaged blades.
- 일반 검사: Check all nuts, bolts, and fasteners for tightness. Inspect fuel lines for cracks or leaks.
- 저장: For long-term storage, drain the fuel tank or use a fuel stabilizer. Clean the unit thoroughly and store in a dry, secure location.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 엔진이 시동되지 않습니다 | 연료 부족, 초크 설정 오류, 점화 플러그 오염, 연료 필터 막힘. | 연료량과 혼합비를 확인하고, 초크를 조정하고, 점화 플러그를 청소/교체하고, 연료 필터를 청소/교체하십시오. |
| 엔진이 제대로 작동하지 않습니다/동력이 부족합니다 | 더러운 공기 필터, 잘못된 연료 혼합, 마모된 점화 플러그, 기화기 문제. | Clean air filter, ensure correct fuel mixture, replace spark plug, consult service center for carburetor. |
| 절단 부착물이 회전하지 않음 | Obstruction, damaged drive shaft, clutch issue. | Turn off engine and clear obstruction, inspect drive shaft, consult service center. |
| 과도한 진동 | Damaged or unbalanced blade, loose components. | Inspect and replace blade if damaged, tighten all fasteners. |
명세서
| 모델 번호 | TP5434411 |
| 배수량 | 42.7cc |
| 정격 전력 | 1.25Kw (2HP) |
| 최대 속도 | 9000rpm |
| Max Cutting Path (Trimmer) | 420mm |
| Spool Liner Diameter | 2.4mm X 4m |
| Blade Diameter (3-teeth) | 255mm |
| 연료 탱크 용량 | 1200ml |
| 엔진 유형 | Powerful 2-stroke motor, Air cooled engine, single cylinder |
| 기능 | 트리머 및 커터 |
| 품목 무게 | 10kg(10000그램) |
| 제품 치수 | 105L x 52W 센티미터 |
| 조립이 필요합니다 | 예 |
| 원산지 | 중국 |
보증 및 지원
For warranty information, technical support, or to order replacement parts, please contact TOTAL customer service or your authorized dealer. Keep your purchase receipt as proof of purchase.
Specific warranty terms and conditions may vary by region. Refer to the warranty card included with your product or visit the official TOTAL web자세한 내용은 사이트를 참조하세요.
