1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your EPLO iX7 Smart Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. 안전 정보
Observe all safety warnings and precautions to prevent injury or damage to the product.
- 설치 또는 유지보수 작업을 하기 전에 반드시 전원 공급 장치를 차단하십시오.
- Do not expose the product to excessive moisture or direct water spray, except as intended for cleaning.
- 수리 작업에는 반드시 공인된 서비스 담당자를 이용하세요.
- Keep children and pets away from the toilet during operation of automatic features.
- Do not use abrasive cleaners or harsh chemicals on any part of the toilet.
3. 패키지 내용
패키지에 모든 구성 요소가 들어 있는지 확인하세요.
- 스마트 화장실 유닛
- 원격 제어
- Sealing Wax Ring
- 플랜지
- Three-Way Angle Valve
- 장착 키트
- 설치 골판지
- 사용자 설명서
- AAA 배터리 2개 (리모컨용)
4. 제품 특징
The EPLO iX7 Smart Toilet offers a range of advanced features for enhanced comfort and hygiene.

Image: The EPLO iX7 Smart Toilet with its remote control mounted on the wall.
4.1. Auto Open/Close Lid
The toilet lid can automatically open and close. This function can be toggled on or off. When off, the lid can still be opened/closed via foot kick or remote control.

Image: Illustration of the automatic lid opening and closing feature, alongside the remote control.
4.2. Foam Dispenser (Foam Shield)
The integrated foam dispenser creates a foam layer in the bowl to help isolate odors, prevent splashing, and reduce bacterial adhesion. Foam liquid can be created using body wash and water (60% water).

Image: Visual representation of the foam shield feature, showing its ability to prevent splashing and isolate odors.
4.3. Heated Seat & Night Light
The seat provides adjustable heating for comfort. A built-in night light guides users in the dark, automatically activating in low light conditions.

이미지: 클로즈업 view of the elongated heated seat and the integrated night light.
4.4. Warm Water Bidet & High-Speed Dryer
The bidet offers instant warm water for female and rear wash functions, with adjustable temperature and nozzle position. After washing, a high-speed dryer with adjustable air temperature and speed provides efficient drying.

Image: Diagram showing UVC cleaning of the nozzle and various bidet wash modes (Rear/Front, H/C Massage, Moving Wash).

Image: Illustration of the high-speed dryer function with adjustable temperature and speed settings.
4.5. Siphonic Jet Flushing Technology
The iX7 utilizes siphonic jet flushing technology for powerful and efficient cleaning. It is tankless and features a built-in backup battery, allowing flushing even during a power outage.

Image: Diagram illustrating the siphonic jet flushing mechanism, showing whirlpool flush, jet flow push, and siphon blowdown.
4.6. LED Temperature Display
An LED display shows real-time temperatures for water, seat, and air dryer. It also features an ECO mode for energy efficiency.

Image: Close-up of the LED display showing water, dryer, and seat temperature settings, including ECO mode.
4.7. Japanese SIAA Certified Seat
The toilet seat is covered with a hygienic coating, certified by Japanese SIAA, for enhanced cleanliness.

Image: Graphic indicating Japanese SIAA certification for the hygienic coating on the toilet seat.
5. 설치
The EPLO iX7 Smart Toilet is designed for floor-mounted installation with a standard 12-inch rough-in. Professional installation is recommended.
5.1. 설치 전 점검
- Ensure your bathroom has a standard 12-inch rough-in.
- Verify that the water pressure is at least 35 PSI.
- Confirm availability of a grounded electrical outlet (US style with ground plug).
- Do not use with LSP Pull Stop Box Valves.
5.2. 치수
The toilet dimensions are approximately 27.2"D x 16"W x 18.8"H. The seat height is 17 inches.

Image: Technical drawing showing the dimensions of the EPLO iX7 Smart Toilet, including seat height and rough-in requirement.
5.3. 설치 단계
Refer to the included 'Installation Cardboard' and detailed instructions within the user manual for step-by-step guidance. Key steps include:
- Prepare the floor flange and water supply line.
- Install the wax ring and secure the toilet to the floor using the mounting kits.
- Connect the water supply to the three-way angle valve.
- 전원 코드를 접지된 콘센트에 연결하십시오.
6. 사용 설명서
The EPLO iX7 Smart Toilet offers multiple ways to control its functions.
6.1. Flushing Methods
The toilet supports various flushing methods:
- 원격 제어식 물내림 장치: Use the dedicated flush button on the remote.
- Side Button Flush: Press the flush button located on the side of the toilet.
- 풋킥 플러시: A sensor at the base allows for flushing by gently kicking the foot sensor.
- 시트에서 내린 후 자동 물내림 기능: The toilet automatically flushes after the user stands up and moves away from the seat. This function can be enabled/disabled.

Image: Visual guide to the four flushing methods (remote, press, foot kick, off-seat auto flush) and the auto open/close sequence for male and female users.
6.2. 비데의 기능
Use the remote control to activate and adjust bidet functions:
- 후면 세척: 후방 세척용.
- 여성용 세척제: 여성 청결용.
- 움직이는 물: 노즐이 앞뒤로 움직여 더 넓은 청소 범위를 제공합니다.
- H/C 마사지: Alternating hot and cold water for a massage effect (10 seconds hot, 5 seconds cold).
- Adjust water temperature and pressure using the remote.
6.3. Dryer Operation
After bidet use, activate the dryer function via the remote control. Adjust air temperature and speed to your preference.
6.4. 원격 제어
The wireless remote control provides access to all smart toilet functions. Ensure the included AAA batteries are installed correctly.
7. 유지관리
Regular cleaning and maintenance ensure optimal performance and longevity of your EPLO iX7 Smart Toilet.
7.1. 변기 청소
Clean the ceramic bowl with a mild, non-abrasive toilet cleaner and a soft brush or cloth. Avoid harsh chemicals that could damage the glaze.
7.2. Cleaning the Seat and Lid
Wipe the seat and lid with a damp cloth and mild soap. Do not use chemical cleaners on the SIAA certified hygienic coating, as it may cause adverse reactions.
7.3. 노즐 청소
The bidet nozzle is removable for cleaning. Periodically clean the nozzle with a soft brush and water. The UVC cleaning function helps maintain nozzle hygiene before each use.
7.4. Foam Dispenser Maintenance
Regularly refill the foam dispenser with the recommended mixture of body wash and water (60% water).
8. 문제 해결
If you encounter issues, refer to the following common troubleshooting tips. For persistent problems, contact customer support.
- 전원 없음: Check if the power cord is securely plugged in and the circuit breaker is not tripped.
- 물 흐름 없음: Ensure the water supply valve is fully open. Check for kinks in the water supply hose.
- 뚜껑이 자동으로 열리거나 닫히지 않음: Verify the auto open/close function is enabled in the settings. Check for obstructions.
- 비데가 작동하지 않습니다: Ensure the seat sensor is activated (user is seated). Check water temperature settings.
- 리모콘이 응답하지 않음: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the toilet.
- 약한 물내림: Check water pressure. Ensure the siphonic jet is not obstructed.
9. 사양
| 특징 | 사양 |
|---|---|
| 모델 | iX7 |
| 제품 치수 | 27.2인치 깊이 x 16인치 너비 x 18.8인치 높이 |
| 품목 무게 | 103 파운드 |
| 재료 | ABS, 세라믹, 스테인리스 스틸 노즐 |
| 설치 유형 | 바닥 장착 |
| 러프 인 | 표준 12인치 |
| 좌석 높이 | 17인치 |
| 물 소비량 | 1회 물 내림 시 1.28갤런 |
| 플러시 타입 | Automatic, Siphonic Jet Flushing Technology |
| 특별 기능 | Auto Open/Close, LED Temp Display, Nightlight, High Speed Dryer, Adjustable Dryer Speed, Foam Dispenser, Heated Seat, Warm Water Bidet, UVC Cleaning, Backup Battery |
| 인증 | ETL Listed, Japanese SIAA Certified (Seat) |
| 전원 단자 | B - 접지 플러그가 있는 미국식 |
| 배터리(리모컨) | AAA 배터리 2개 (포함) |
10. 보증 및 지원
EPLO provides a 30일 환불 보장 그리고 12개월 교체 for the entire toilet unit. For any problems or inquiries, please contact EPLO customer service. They aim to reply within 24 hours.
10.1. 고객 지원팀에 문의하는 방법
If you purchased through Amazon, you can typically find the seller's contact information by navigating to your order details or by clicking on the seller's name on the product page and selecting 'Ask a question'.

Image: Instructions on how to access customer support by clicking 'Sold by EPLO US' and then 'Ask a question' on the Amazon product page.





