펄사 2,400W 휴대용 가솔린 엔진 저소음 인버터 발전기

소개

This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your Pulsar GD240N portable inverter generator. Please read this manual thoroughly before operating the generator to ensure proper usage and longevity of the product.

주요 특징:

• 2400W starting watts, 1800W running watts
• Type A & Type C USB ports
• 매우 조용한 작동
• Three-in-one switch for simplified control
• Parallel capability to combine with another unit for increased power output
• Enhanced fuel efficiency

안전 정보

위험: 일산화탄소 위험

Using a generator indoors WILL KILL YOU IN MINUTES. Generator exhaust contains poisonous carbon monoxide gas that can cause unconsciousness or DEATH. Operate in well-ventilated, outdoor areas away from open windows or doors. Point exhaust away from occupied areas. Do not run generator in enclosed areas (e.g., not in house or garage). Move to fresh air and get medical help if sick, dizzy, or weak.

Always ensure the generator is placed on a level surface and away from any flammable materials. Keep children and pets away from the operating unit.

패키지 내용

Your Pulsar GD240N generator package includes the following items:

• Pulsar GD240N Portable Inverter Generator
• 사용 설명서
• 오일 깔때기
• Basic Tool Kit (screwdriver)

설정

엔진 오일 추가

Before starting the generator for the first time, you must add engine oil. The generator is shipped without oil.

1. Locate the oil fill cap on the side of the generator.
2. Remove the side panel by unscrewing the two screws.
3. 오일 주입 캡/딥스틱을 제거합니다.
4. Using the provided funnel, carefully add 5W-30 engine oil until it reaches the upper mark on the dipstick. The oil capacity is approximately 0.33 - 0.35 US Quarts (11.2 oz).
5. Replace the oil fill cap and secure the side panel.

Image: Locating the oil fill cap and adding 5W-30 engine oil to the Pulsar GD240N inverter generator.

연료 추가

Use only fresh, unleaded gasoline with an octane rating of 87 or higher. Do not use E85 fuel.

1. 발전기가 평평한 곳에 놓여 있는지, 엔진이 꺼져 있고 식었는지 확인하십시오.
2. 연료 캡을 푸십시오.
3. Carefully fill the fuel tank (capacity 1.18 Gallons) with gasoline, leaving a small air gap at the top to allow for fuel expansion.
4. 연료 캡을 단단히 닫으세요.

컨트롤 오버view

Familiarize yourself with the control panel located on the front of the generator:

• 엔진 스위치: A three-in-one switch for OFF, RUN, and CHOKE positions.
• 에코 모드 스위치: Activates or deactivates Eco mode for improved fuel efficiency and quieter operation under light loads.
• AC 120V 20A 콘센트: Two standard household outlets.
• AC 120V 30A 콘센트: For higher power demands (e.g., RVs).
• USB 포트: Includes Type A and Type C ports for charging electronic devices.
• DC 12V Outlet: For 12-volt DC appliances.
• Circuit Breaker/Reset Button: Resets the circuit in case of an overload.
• 병렬 연결 포트: Allows connection of two compatible generators for increased power.
• 표시등: Displays status for Low Oil, Overload, and Output.

이미지: 상세 view of the Pulsar GD240N control panel, showing AC outlets, USB ports, DC 12V outlet, and various switches and indicator lights.

작동 지침

발전기 시작

1. Ensure the generator has sufficient oil and fuel.
2. 연료 밸브를 'ON' 위치로 돌립니다.
3. Move the engine switch to the 'CHOKE' position (if the engine is cold).
4. 엔진이 시동될 때까지 리코일 스타터 핸들을 단단히 당깁니다.
5. Once the engine starts, gradually move the engine switch to the 'RUN' position.
6. 발전기를 전기 부하에 연결하기 전에 몇 분 동안 예열하십시오.

Image: The side of the Pulsar GD240N generator showing the engine switch in the 'RUN' position.

에코 모드

The Eco Mode switch allows the generator to adjust engine speed based on the load, optimizing fuel consumption and reducing noise levels. For light loads, switch to 'ON' for quieter and more efficient operation. For heavy loads or when starting high-demand appliances, switch to 'OFF' to ensure full power is available.

장치 연결

Connect your electrical devices to the appropriate outlets on the control panel. Ensure that the total wattag연결된 장치의 e가 ​​발전기의 작동 전력을 초과하지 않습니다.tage (1800W) to prevent overloading.

병렬 작동

The Pulsar GD240N is equipped with parallel connection ports, allowing you to link two compatible Pulsar inverter generators together to double your power output. Refer to the parallel kit's instruction manual for detailed connection procedures.

유지

Regular maintenance is crucial for the optimal performance and longevity of your generator. Always ensure the engine is off and cool before performing any maintenance.

엔진 오일 교환

Change the engine oil after the first 20 hours of use or the first month, whichever comes first. Subsequent oil changes should be performed every 100 hours or every 6 months.

1. 오일 배출 플러그 아래에 적절한 용기를 놓으십시오.
2. 오일이 완전히 배출될 수 있도록 오일 배출 플러그와 오일 주입 캡을 제거하십시오.
3. 오일을 완전히 빼낸 후에는 오일 배출 플러그를 다시 제자리에 끼우십시오.
4. Refill with fresh 5W-30 engine oil as described in the 'Adding Engine Oil' section.

Spark Plug Access

The spark plug is accessible for inspection and replacement. Remove the spark plug cover to access the spark plug. Inspect the spark plug for wear and proper gap. Replace if necessary.

스파크 어레스터

The generator is equipped with a spark arrestor, making it US Forestry approved. Regularly inspect and clean the spark arrestor to prevent carbon buildup, which can restrict exhaust flow and affect performance. Refer to the owner's manual for detailed cleaning instructions.

이미지: 후면 view of the Pulsar GD240N generator, highlighting the exhaust port and spark arrestor.

문제 해결

If your generator experiences issues, consult the following common troubleshooting tips:

표시등

• 낮은 오일 표시등: If illuminated, check and add engine oil. The generator may shut down automatically to prevent engine damage.
• 과부하 표시등: If illuminated, the generator is overloaded. Disconnect some devices and press the reset button.
• 출력 빛: A green light indicates normal power output.

일반적인 문제

• 엔진이 시동되지 않습니다: 연료량, 오일량, 점화 플러그를 점검하고 엔진 스위치가 올바른 위치에 있는지 확인하십시오.
• 전력 출력 없음: Check for tripped circuit breakers, ensure the generator is not overloaded, and verify all connections.

명세서

보증 및 지원

보증 정보

This Pulsar GD240N inverter generator comes with a 2-Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims.

고객 지원

For technical assistance, warranty inquiries, or to order replacement parts, please contact Pulsar Products customer support. Refer to the official Pulsar web자세한 연락처 정보는 해당 사이트나 구매 설명서를 참조하세요.