소개
The Scosche HDGrip XL Heavy Duty Phone Mount is designed for secure and stable smartphone mounting in various vehicles, including semi-trucks, pickup trucks, vans, RVs, and buses. Constructed from aircraft-grade aluminum, this mount provides an ultra-strong grip and shake-proof stability, making it suitable for demanding driving conditions. It features a non-magnetic universal design compatible with phones up to 4 inches wide.
주요 특징은 다음과 같습니다.
- 헤비 듀티 건설: Crafted from aircraft-grade aluminum for maximum durability.
- Strong Suction Cup Base: Features a 3.72-inch diameter adhesive pad for secure attachment to most flat and textured surfaces.
- 조절할 수 있는 View각도: Fully adjustable arm and head with 360-degree rotation for optimal landscape or portrait view주고받음.
- 팔을 뻗은 모습: A 6.5-inch extended arm is ideal for deep dashboards, reducing reach and allowing for adjustable, lockable angles.
- 보편적 인 호환성 : Adjustable arms provide a firm grip for a wide range of smartphones without magnets.
상자 안에 무엇이 들어있나요?
- HDGrip XL Heavy Duty Phone Mount
- 접착식 장착 패드
- 물티슈
설정 및 설치
Follow these steps to properly install your Scosche HDGrip XL Phone Mount:
- 장착 위치 선택: Select a flat, clean surface on your windshield or dashboard. The mount is designed for optimal stability on these surfaces.
- 표면 준비: Use the included alcohol cleaning wipe to thoroughly clean the chosen mounting surface. Allow it to dry completely.
- Apply Adhesive Pad (Optional, for Dashboards): If mounting on a textured dashboard, peel the backing from the 3.72-inch adhesive mounting pad and firmly press it onto the cleaned surface for 30-60 seconds. This provides a smooth foundation for the suction cup.
- 흡착컵 부착: Place the suction cup firmly onto the prepared surface (or adhesive pad). Press down on the center of the suction cup and then engage the locking lever to create a strong vacuum seal.
- Adjust Arm and Cradle: Loosen the tension knobs on the arm to adjust its length and angle. Position the phone cradle to your desired viewing height and distance. Tighten the knobs to secure the arm in place.
- Secure Cradle Angle: The cradle head allows for 360-degree rotation. Adjust the angle and orientation (portrait or landscape) and tighten the locknut to fix it.
Image: Close-up of the extra-strong suction cup base, designed to attach securely to various surfaces.
Image: The 3.72-inch adhesive pad included for creating a smooth mounting surface on textured dashboards.
Video: Official Scosche video demonstrating the installation and features of the Heavy Duty Suction Cup Phone/Tablet Mount.
작동 지침
Once installed, the HDGrip XL mount offers versatile use for your smartphone:
- 전화번호를 입력하세요: Gently pull apart the adjustable arms of the cradle and insert your smartphone. The arms will securely grip your device. The cradle accommodates phones up to 4 inches wide.
- 조정하다 View각도: Loosen the locknut behind the cradle to rotate your phone 360 degrees, allowing for quick transitions between landscape and portrait modes. Tighten the locknut to secure the desired orientation.
- Extend/Retract Arm: Use the tension knobs on the extended arm to adjust the distance and height of your phone. This is particularly useful for deep dashboards to bring your device closer for better visibility.
Image: The Scosche HDGrip XL phone mount securely holding a smartphone on a vehicle's dashboard, displaying navigation.
Image: Close-up of the adjustable cradle arms, showing how they expand to fit phones from 2.2 to 4.0 inches wide.
Image: Illustration of the mount's 360-degree rotation capability for optimal view각도를 나타냅니다.
Video: Official Scosche video showcasing the HDGrip XL Heavy Duty Phone Mount's features and usage in trucks, cars, and vans.
유지
To ensure the longevity and optimal performance of your HDGrip XL Phone Mount:
- 흡입 컵 청소: Periodically clean the suction cup with warm, soapy water to remove dust and debris. Allow it to air dry completely before re-applying.
- 접착력 확인: Regularly check the suction cup's adhesion, especially in extreme temperature changes. If it loses grip, re-clean the surface and re-apply.
- 구성 요소 검사: Ensure all knobs and moving parts are tightened and functioning correctly.
문제 해결
If you encounter issues with your phone mount, consider the following:
- 마운트가 붙지 않음: Ensure the mounting surface is clean, dry, and flat. Re-clean the suction cup and surface with the provided alcohol wipe or warm, soapy water. For textured dashboards, ensure the adhesive pad is properly applied.
- 휴대전화가 제대로 고정되지 않음: Verify that the cradle arms are fully closed around your phone. The tension knob on the cradle should be tightened to provide a firm grip.
- Mount Wobbles: Check all tension knobs on the arm and the locknut on the cradle head. Tighten them firmly to eliminate any movement.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | BMG1WD2HD |
| 장착 유형 | Windshield / Dashboard Suction |
| 재료 | Aircraft-grade aluminum (arm) |
| 흡입 컵 직경 | 3.72 inches (with adhesive pad) |
| Extended Arm Length | 6.5인치 |
| 전화 호환성 | Up to 4 inches wide (non-magnetic) |
| 조절성 | 360-degree rotation, adjustable arm length and angle |
| 색상 | 검은색 |
| 품목 무게 | 9.6 온스 |
보증 및 지원
The Scosche HDGrip XL Heavy Duty Phone Mount is backed by Scosche's Lifetime Tech Support and a Limited 3-Year Warranty. For assistance or warranty claims, please visit the official Scosche web사이트를 방문하거나 고객 서비스에 문의하세요.
