1. 서론
Thank you for choosing the Steelmate 986X Motorcycle 2-Way Alarm System. This system is designed to provide advanced security and convenience features for your motorcycle, including anti-theft protection and remote engine starting capabilities. Please read this manual thoroughly before installation and operation to ensure proper use and to maximize the system's benefits.
2. 제품 특징
- 2-Way Communication (Remote Monitoring): The system notifies the remote control of any abnormalities detected on the motorcycle. Transmission range is approximately 150 meters, and reception range is up to 1000 meters.
- Security/Anti-theft Function: Features a siren and blinker alarm. An initial shock triggers a light warning sound. If a second shock is detected within 15 seconds, a full alarm activates, including a 15-second siren, blinker flashing, and engine lock. The remote control also receives a notification.
- Engine Starter Function: Allows remote starting of the engine, ideal for warming up the motorcycle before use.
- Hijack Prevention Function: Enables forced engine shutdown. Pressing the stop button will trigger an alarm after 10 seconds, followed by engine cessation.
- High-Sensitivity Shock Sensor: Integrated shock sensor with three adjustable sensitivity levels via the remote control.
- Time Display and Alarm Setting: The remote control displays the current time and supports alarm clock settings.
- Parking Location Confirmation: A convenient feature to help locate your motorcycle in crowded parking areas.
- 배터리 용량tage 모니터링: Provides real-time monitoring of the motorcycle's battery voltage, aiding in battery management.
- 신호 강도 표시: The remote control indicates the signal reception strength, allowing you to confirm the effective range.
- Two Ultra-Compact Remote Controls: Includes two small, portable remote controls.
- 보안 LED: An integrated LED indicator for visual security status.
3. 패키지 내용
Upon opening your Steelmate 986X system, please verify that all the following components are included:
- Control Box Main Unit (Daily waterproof specification)
- Alarm Unit (Siren)
- Remote Controls (2 units, with built-in rechargeable lithium batteries)
- USB 충전 케이블
- Wiring Harness (1 set)
- Japanese Instruction Manual (This document is an English translation/summary)
이미지: 완전한 view of all Steelmate 986X alarm system components: the main control unit, siren, two remote controls, USB charging cable, wiring harness, and fuses.
4. 사양
| 매개변수 | 값 |
|---|---|
| 목적 | Anti-theft, Engine Starter Function |
| System Weight (Main Unit + Parts) | 0.7킬로그램 |
| Remote Control Weight (per unit) | 30G(지) |
| Control Box Dimensions (L*W*H) | 7.5 x 6.5 x 2cm |
| Remote Control Dimensions (L*W*H) | 7 x 3.5 x 1cm |
| 운영 볼륨tage | 12V ± 2V |
| 대기 전류 | < 20mA |
| 사이렌 출력 | 120데시벨 |
| Maximum Receive Range | 1000 미터 |
5. 설정 및 설치
Installation of the Steelmate 986X system requires electrical knowledge and should ideally be performed by a qualified professional. Incorrect installation can lead to damage to the system or your motorcycle's electrical components.
5.1 구성 요소 식별
주요 구성 요소를 숙지하세요:
- 제어기: 경보 시스템의 중앙 처리 장치.
- 사이렌: Produces the alarm sound.
- 원격 제어: Used to operate the system.
- 배선 하네스 : Connects the components to the motorcycle's electrical system.
- 보안 LED: Visual indicator for system status.
5.2 배선도view
The following diagram illustrates the general wiring connections for the 986X system. Refer to this diagram carefully during installation.
Image: Detailed wiring diagram for the Steelmate 986X Motorcycle Alarm System, showing connections to the AC ECU, engine key, 12V battery, LED, siren, and blinkers.
5.3 일반 설치 단계(전문가에게 문의)
- 배터리 분리: Always disconnect the motorcycle's battery before beginning any electrical work.
- 마운트 컨트롤 박스: Securely mount the main control box in a hidden, dry location on the motorcycle. Ensure it is protected from water and excessive vibration.
- 마운트 사이렌: Install the siren in a location where its sound will not be muffled and is difficult for unauthorized individuals to access.
- 전원 연결: Connect the main power wires (red for positive, black for negative) from the control box to the motorcycle's 12V battery.
- Connect Ignition: Connect the ignition wire (e.g., orange) to the motorcycle's ignition circuit. This is crucial for the engine start and engine lock functions.
- Connect Blinker Wires: Connect the blinker wires (e.g., yellow) to the motorcycle's left and right turn signal circuits.
- Connect Security LED: Install the security LED in a visible location to deter potential thieves.
- Connect Engine Start/Kill Wires: Carefully connect the engine start and kill wires according to the diagram and your motorcycle's specific wiring. This may involve cutting existing wires (e.g., gray ignition code wire).
- 안전한 배선: 배선이 마찰되거나 찝히거나 움직이는 부품과 간섭하지 않도록 모든 배선을 정리하고 고정하십시오.
- 배터리를 다시 연결하고 테스트하세요. Once all connections are made and secured, reconnect the motorcycle battery and perform a thorough test of all alarm functions.
6. 사용 설명서
The Steelmate 986X system is operated primarily via its two-way remote controls.
Image: A pair of Steelmate 986X two-way remote controls, featuring an LCD screen and control buttons, attached to metal keychains.
6.1 원격 제어view
Each remote control features an LCD screen and several buttons for various functions.
Image: A Steelmate 986X remote control held in a hand, displaying information such as battery voltage (15.5V), time (17:45), and signal strength on its LCD screen.
6.2 기본 작업
- 알람 무장: 를 누르세요 잠그다 button once. The system will arm, and the security LED will flash. The remote will confirm with an audible tone and display.
- 경보 해제: 를 누르세요 터놓다 button once. The system will disarm, and the security LED will turn off. The remote will confirm.
- 원격 엔진 시동: 를 누르고 계세요 엔진 시동 button (often depicted with a lightning bolt or engine icon) for a few seconds. The motorcycle engine will start.
- Remote Engine Stop: While the engine is running via remote start, press the 엔진 정지 button (often depicted with a stop sign or power icon).
- Parking Location Confirmation: 를 누르세요 Horn/Locate button (often depicted with a horn icon) once. The motorcycle's siren will chirp and blinkers will flash, helping you locate it.
- 충격 센서 감도 조정: Refer to the detailed instructions in the original manual for specific button combinations to adjust the 3-level shock sensor sensitivity. This is typically done while the alarm is disarmed.
- Hijack Prevention: 긴급 상황 발생 시, 버튼을 길게 누르십시오. 멈추다 button on the remote. After approximately 10 seconds, the alarm will sound, and the engine will be forced to stop.
6.3 Remote Control Display Information
The LCD screen on the remote control provides important status information:
- 배터리 용량tage: Displays the motorcycle's current battery voltage.
- 시간: 현재 시간을 표시합니다.
- 신호 강도: Indicates the strength of the signal received from the motorcycle.
- 경보 상태: Icons will indicate if the alarm is armed, triggered, or disarmed.
- Shock Indicator: Shows if a shock has been detected.
7. 유지관리
- 리모컨 배터리: The remote controls have built-in rechargeable lithium batteries. Recharge them using the provided USB cable when the battery indicator on the remote shows low power.
- 시스템 청소: Keep the main control unit and siren clean and free from dirt or debris. Avoid using harsh chemicals.
- 배선 검사: Periodically check all wiring connections for signs of wear, corrosion, or looseness. Ensure all connections are secure.
- 물 노출: While the control box is daily waterproof, avoid direct high-pressure water spray on any components, especially the siren and remote controls.
8. 문제 해결
If you encounter issues with your Steelmate 986X system, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 경보기가 작동/해제되지 않습니다. | Remote control battery low; out of range; system power issue. | Recharge remote battery; move closer to motorcycle; check motorcycle battery and system wiring. |
| Engine start function not working. | Incorrect wiring; motorcycle in gear; low motorcycle battery. | Verify wiring connections (especially ignition and engine start wires); ensure motorcycle is in neutral; check motorcycle battery voltage. |
| Alarm triggers too easily or not at all. | Shock sensor sensitivity incorrectly set. | Adjust shock sensor sensitivity via the remote control. |
| Remote control display is blank. | 리모콘 배터리가 다 되었습니다. | Recharge the remote control battery using the USB cable. |
| Poor signal reception on remote. | 장애물; 과도한 거리; 간섭. | Move to an open area; reduce distance to motorcycle; avoid areas with high electromagnetic interference. |
If you are unable to resolve an issue after consulting this section, please contact your dealer or a qualified service technician.
9. 안전 정보
- Always ensure the motorcycle is in neutral before attempting remote engine start.
- Do not attempt to install the system if you are not familiar with motorcycle electrical systems. Seek professional installation.
- 리모컨은 어린이의 손이 닿지 않는 곳에 두십시오.
- Do not disassemble or modify the system components. This may void your warranty and cause damage.
- 단락이나 전기적 위험을 방지하기 위해 모든 배선이 적절하게 절연되고 고정되었는지 확인하십시오.
