G.SKILL 립죠스 M5 RGB 시리즈 DDR5 RAM 사용 설명서

1. 제품 오버view 및 기능

The G.SKILL Ripjaws M5 RGB Series DDR5 U-DIMM Memory Kit (Model: F5-6400J3239G16GX2-RM5RK) is designed for desktop PC and gaming systems, offering high-speed DDR5 performance. This kit includes two 16GB modules for a total capacity of 32GB, rated for speeds up to DDR5-6400 with CL32-39-39-102 timings at 1.40V. It features non-ECC, 288-pin U-DIMM architecture and supports Intel XMP 3.0 memory overclock profiles.

Figure 1.1: G.SKILL Ripjaws M5 RGB Series DDR5 RAM modules.

주요 특징:

• 고속 성능: Rated for DDR5-6400 MT/s with optimized timings for enhanced system responsiveness.
• Intel XMP 3.0 Support: Enables easy overclocking to achieve rated speeds on compatible platforms.
• RGB 조명: Customizable RGB light bar for personalized aesthetics, compatible with G.SKILL Trident Z Lighting Control software and various third-party motherboard RGB software (e.g., ASUS Aura Sync, ASRock Polychrome Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync).
• 품질 건설: Features aluminum heatspreaders in matte black or matte white, with each memory kit individually hand-tested for reliability.
• 호환성: Designed for Intel Z890, Intel Z790, Intel B860, Intel B760 platforms.

Figure 1.2: Ripjaws M5 RGB modules installed, highlighting performance and XMP 3.0 readiness.

Figure 1.3: Available heatspreader colors: Matte Black and Matte White.

2. 설치 가이드

Proper installation of your G.SKILL Ripjaws M5 RGB DDR5 RAM is crucial for optimal performance and system stability. Always handle memory modules by their edges to avoid touching the gold contacts or components.

2.1 설치 전 점검 목록:

• 메인보드의 전원이 꺼져 있고 전원 공급 장치에서 분리되어 있는지 확인하십시오.
• Consult your motherboard's manual for specific RAM slot configurations and recommended installation order (e.g., for dual-channel operation).
• 부품을 다루기 전에 접지된 금속 물체를 만져 정전기를 방전시키십시오.

2.2 Installing the Memory Modules:

1. Locate the DIMM slots on your motherboard. For dual-channel configurations, refer to your motherboard manual for the correct slots (often slots 2 and 4, or 1 and 3).
2. Gently push open the retention clips at both ends of the selected DIMM slot.
3. Align the notch on the bottom edge of the RAM module with the corresponding key in the DIMM slot. This ensures correct orientation.
4. Insert the module firmly and evenly into the slot. Apply pressure to both ends of the module until the retention clips snap into place, securing the module.
5. Repeat the process for the second RAM module, following your motherboard's recommended configuration.

Figure 2.1: Installed Ripjaws M5 RGB modules within a PC system.

3. 사용 설명서

Your G.SKILL Ripjaws M5 RGB DDR5 RAM modules will initially boot at JEDEC default SPD (Serial Presence Detect) speeds with default BIOS settings. To achieve the advertised DDR5-6400 MT/s speed, you must enable the Intel XMP 3.0 profile in your motherboard's BIOS.

3.1 Enabling Intel XMP 3.0:

1. Power on your computer and enter the BIOS/UEFI setup. This is typically done by pressing a specific key (e.g., Del, F2, F10) during startup.
2. Navigate to the memory settings or overclocking section. The exact location varies by motherboard manufacturer. Look for options like "XMP," "DOCP," or "A-XMP."
3. Select the Intel XMP 3.0 profile. This will automatically configure the memory frequency, timings, and voltage to the rated specifications of your G.SKILL RAM.
4. Save the changes and exit the BIOS. Your system will restart with the new memory settings.

메모: Enabling XMP is a form of overclocking. System stability and the ability to reach the rated XMP speed depend on the compatibility and capability of your specific motherboard and CPU. Refer to the G.SKILL website for a Qualified Vendor List (QVL) or RAM Configurator tool for validated motherboard and hardware compatibility.

3.2 RGB Lighting Control:

The Ripjaws M5 RGB modules feature a streamlined RGB light bar. You can personalize the lighting effects using G.SKILL Trident Z Lighting Control software or compatible third-party motherboard software. Check your motherboard manufacturer's website for their specific RGB control utility.

Figure 3.1: Customizable RGB lighting via software.

4. 유지관리

G.SKILL Ripjaws M5 RGB memory modules are designed for durability and performance. Minimal maintenance is required, but adhering to the following guidelines will help ensure their longevity and stable operation.

4.1 일반 관리:

• Keep your computer's interior clean and free of dust to maintain optimal airflow and cooling for all components, including RAM.
• Avoid physical impact or bending of the memory modules.
• Do not attempt to remove the heatspreaders, as this may void your warranty and damage the modules.

4.2 Important Compatibility Note:

Do not mix memory kits. G.SKILL memory kits are sold in matched sets that are designed to run together. Mixing different memory kits, even if they are the same brand and model, can lead to stability issues, lower speeds, or system failure. For upgrades, it is recommended to purchase a new, complete matched kit.

5. 문제 해결

If you encounter issues after installing your G.SKILL Ripjaws M5 RGB DDR5 RAM, consider the following troubleshooting steps:

5.1 일반적인 문제점 및 해결책:

• 시스템 부팅 실패 / 화면 출력 안 됨:
  • Ensure RAM modules are fully seated in their slots and retention clips are locked.
  • Verify RAM compatibility with your motherboard and CPU by checking the G.SKILL QVL (Qualified Vendor List) on their official web대지.
  • Try booting with only one RAM module installed to identify a potentially faulty module.
  • Reset your motherboard's BIOS to default settings (clear CMOS).
• Lower Than Expected Memory Speed:
  • Confirm that Intel XMP 3.0 (or equivalent profile like DOCP/A-XMP) is enabled in your BIOS settings.
  • 메인보드 BIOS를 최신 버전으로 업데이트하십시오. 최신 버전으로 업데이트하면 메모리 호환성과 안정성이 향상되는 경우가 많습니다.
  • Verify that your CPU and motherboard officially support the rated memory speed.
• 시스템 불안정/충돌:
  • Disable XMP/overclocking profiles in BIOS and test for stability at default JEDEC speeds.
  • Run memory diagnostic tools (e.g., MemTest86) to check for errors in the RAM modules.
  • Ensure adequate cooling within your PC case to prevent overheating of components.

If issues persist, contact G.SKILL technical support or consult a qualified PC technician.

6. 제품 사양

7. 보증 및 지원

For detailed warranty information, technical support, and the latest Qualified Vendor List (QVL) for motherboard compatibility, please visit the official G.SKILL website. G.SKILL provides comprehensive support resources to assist users with their products.

온라인 리소스:

• G.SKILL Official Web대지: www.gskill.com
• Memory QVL / RAM Configurator Tool: Available on the G.SKILL website to check compatibility with specific motherboards and CPUs.