소개
Atomic Aquatics B2X 스쿠버 다이빙 레귤레이터는 탁월한 성능과 내구성을 위해 설계되었으며, 독특한 보조 밸브를 결합했습니다.tag견고한 첫 번째 s를 갖춘 e 디자인tage. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your B2X regulator to ensure safe and enjoyable diving experiences.
제품 끝view

This image displays the complete Atomic Aquatics B2X Scuba Diving Regulator assembly, featuring both the first stage (left) and the second stage (right). The first stage connects to the dive tank, while the second stage is the part the diver breathes from.
The B2X regulator features a first stage crafted with a sleek black Diamond-Like Carbon (DLC) over chrome plating, offering unparalleled tribological properties for supreme durability and corrosion resistance. The second stage incorporates Atomic Aquatics' patented Automatic Flow Control (AFC) for natural breathing and a patented Titanium Seat Saving Orifice. It also includes a PVD coated comfort swivel and a dual material second stag전자 덮개.
이 비디오는 포괄적인 내용을 제공합니다.view of the Atomic Aquatics B2X Regulator, highlighting its key features, design, and operational benefits for scuba divers.
설정
1. 퍼스트에스tage Connection (DIN Unsealed)
- Ensure the O-ring on the tank valve is present and in good condition.
- Align the DIN fitting of the first stage with the tank valve.
- Screw the DIN fitting into the tank valve until it is hand-tight. Do not overtighten.
- Slowly open the tank valve to pressurize the system. Listen for any leaks.
2. 호스 연결
- Connect the primary second stage hose to one of the low-pressure ports.
- Connect the submersible pressure gauge (SPG) hose to a high-pressure port.
- Connect any additional low-pressure hoses (e.g., BCD inflator, alternate air source) to the remaining low-pressure ports. The first stage features five low-pressure ports and two high-pressure ports for versatile configuration.
3. 다이빙 전 점검
- 모든 연결이 안전하고 정보 유출이 없는지 확인하십시오.
- Check the pressure on your SPG.
- Test the primary second stage by taking a few breaths to ensure smooth airflow.
- Test the alternate air source (if connected).
- Ensure the BCD inflator functions correctly.
조절기 작동
Automatic Flow Control (AFC)
The B2X regulator is equipped with a patented Automatic Flow Control (AFC) system. This innovative feature automatically adjusts the airflow to maintain optimal breathing effort at varying depths, eliminating the need for manual adjustments during your dive. Divers can experience natural, effortless breathing without turning dials or pushing buttons.
Rapid Adjustment Knob
For specific situations, such as surf entry or when using the regulator as an octopus (alternate air source), the B2X includes an over-molded Rapid Adjustment Knob. This knob allows for quick, temporary adjustments to prevent free-flow or to fine-tune breathing resistance as needed.
Comfort Swivel
The PVD coated comfort swivel on the second stage allows for 30° rotational movement, preventing hose binding or kinking and enhancing overall comfort during your dive.
유지
Post-Dive Care
- After each dive, rinse your regulator thoroughly with fresh water while still pressurized to prevent water from entering the first stage.
- Once depressurized, replace the dust cap on the first stage before rinsing again.
- 조절기를 그늘지고 통풍이 잘 되는 곳에서 완전히 건조시키십시오. 직사광선을 피하십시오.
정기 서비스
To ensure optimal performance and safety, your Atomic Aquatics B2X regulator requires periodic professional servicing. Consult your authorized Atomic Aquatics dealer for recommended service intervals, typically annually or after a certain number of dives, whichever comes first.
저장
Store your regulator in a cool, dry place away from direct sunlight, extreme temperatures, and harsh chemicals. Ensure hoses are not kinked during storage.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Free-flow from second stage | Incorrect adjustment, debris in valve, cold water. | Adjust Rapid Adjustment Knob, gently tap second stage, or seek professional service if persistent. |
| Hard breathing | Low tank pressure, clogged filter, worn components. | Check tank pressure, ensure regulator is clean, or seek professional service. |
| 연결 부위에서 공기 누출 | Damaged O-ring, loose connection. | Inspect and replace O-rings, tighten connections. If leak persists, do not dive and seek service. |
For any issues not listed or if solutions do not resolve the problem, discontinue use and contact an authorized Atomic Aquatics service technician.
명세서
- 모델 이름: B2X
- 모델 번호: 03-0027-4P
- 스타일: Din Unsealed
- 재료: Titanium (First Stage), Diamond-Like Carbon (DLC) over Chrome Plating (First Stage), Dual Material (Second Stage Cover)
- 색상: 검은색
- 품목 무게: 3 파운드
- 품목 크기(LxWxH): 12 x 8 x 5 인치
- Nitrox Ready: Yes, mixes up to 40%
- Low Pressure Ports: 다섯
- High Pressure Ports: 둘
- 받침: 360° Swivel Cap on First Stage, PVD Coated Comfort Swivel on Second Stage
- 첫 번째 이용 가능: 30년 2014월 XNUMX일
보증 및 지원
보증 정보
The Atomic Aquatics B2X Scuba Diving Regulator comes with a 1년 보증 구매일로부터. 본 보증은 정상적인 사용 중 발생한 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.
고객 지원
For technical assistance, service, or warranty inquiries, please contact an authorized Atomic Aquatics dealer or visit the official Atomic Aquatics website for support resources. Regular maintenance by certified technicians is crucial for maintaining your regulator's warranty and performance.
더 자세한 정보와 공식 대리점 위치는 다음 웹사이트에서 확인하실 수 있습니다. Atomic Aquatics Store on Amazon.





