ELECROW 8 Inch Touchscreen Monitor User Manual

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your ELECROW 8 Inch Touchscreen Monitor. This portable display features a 1280x800 IPS LCD panel, offering clear visuals and responsive touch functionality. It is designed for broad compatibility with devices such as Raspberry Pi, Windows PCs, Jetson Nano, laptops, and various game consoles.

상자 안에 무엇이 들어있나요?

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1x ELECROW 8-inch Touch Monitor
• 1x HD to HD Cable
• 2x USB A to Micro USB Cable
• 1x Micro HD to HD Connector
• 1x Screw Pack (Small Copper Pillars x4, M2.5 Screws x4)
• 2x Pro Stand
• 1x 사용자 설명서

Image: Package contents of the ELECROW 8 Inch Touchscreen Monitor.

설정

1. 물리적 연결

1. 스탠드 부착: Insert the two Pro Stands into the designated slots on the bottom edge of the monitor for stable desktop use.
2. 비디오 입력 연결: Use the provided HD to HD Cable or Micro HD to HD Connector to connect the monitor's HDMI-compatible port to your device (e.g., Raspberry Pi, PC, game console).
3. Connect Power and Touch: Use one of the provided USB A to Micro USB Cables. Connect the Micro USB end to the monitor's 'TOUCH' port and the USB A end to a USB port on your device. This connection provides both power to the monitor and enables touch functionality.
4. Additional Power (Optional): If your device's USB port cannot supply sufficient power, or if you experience display instability, connect a second USB A to Micro USB Cable to the monitor's 'POWER' port and to a separate power source (e.g., a USB wall adapter, not included).
5. Raspberry Pi Mounting: For a compact setup, you can mount a Raspberry Pi directly behind the monitor using the provided screw pack and the non-VESA mounting holes.

이미지: 후면 view of the monitor showing port connections and dimensions.

Image: Raspberry Pi mounted behind the display for a clean setup.

2. Software Configuration (for Touch Functionality)

• Windows PC (7/8/10/11): The monitor supports 5-point multi-touch. Typically, Windows will automatically recognize the touch screen upon connection. No additional drivers are usually required.
• Raspberry Pi (Raspbian, Kali Linux, Ubuntu, Kodi, Win10 IOT): The monitor supports single-point touch. Ensure your operating system is up-to-date. Specific configuration steps may be required depending on your OS version. Refer to your Raspberry Pi's operating system documentation for touch screen setup instructions if touch is not immediately responsive.
• Other Devices (Jetson Nano, etc.): Touch functionality may vary. Consult the documentation for your specific device and operating system for compatibility and setup procedures.

작동 지침

전원 켜기/끄기

The monitor powers on automatically when it receives power through the USB connection and a video signal via HDMI. To turn off the monitor, disconnect the power supply. There is no dedicated power button on this model.

백라이트 조정

The backlight of the monitor can be adjusted using the button located on the rear of the monitor, labeled 'BACKLIGHT'. Press this button to cycle through different brightness levels.

터치스크린 기능

The monitor offers responsive touch input:

• PC/Laptop (Windows 7/8/10/11): Supports 5-point multi-touch for gestures like tap, press, zoom in, zoom out, and mouse click.
• Raspberry Pi & Linux-based Systems: Supports single-point touch.

Image: Demonstration of 5-point multi-touch capabilities.

다양한 응용 프로그램

This monitor can be used in various scenarios:

• 보조 모니터: Extend your PC or laptop display for increased productivity.
• 디지털 액자: Display photos and videos.
• 홈 모니터링: Connect to security cameras or smart home systems.
• 임베디드 시스템: Ideal for Raspberry Pi, Jetson Nano, and other single-board computers.
• 노름: Connect to game consoles for a portable gaming experience.

이미지: 전amples of monitor applications.

명세서

유지

• 화면 청소: 부드럽고 보풀이 없는 천을 사용하여 화면을 부드럽게 닦으세요. 잘 지워지지 않는 얼룩은 가볍게 닦아주세요.amp천에 물이나 화면에 안전한 세척액을 묻혀 닦아주세요. 강한 화학 물질이나 연마재는 사용하지 마세요.
• 케이스 청소: The acrylic case can be cleaned with a soft cloth. Avoid excessive force to prevent scratches.
• 저장: 사용하지 않을 때는 모니터를 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• 손질: Handle the monitor with care to avoid dropping or impacting the screen or case.

문제 해결

• 디스플레이 없음 / 검은색 화면:
  • HDMI 케이블이 모니터와 장치에 모두 단단히 연결되어 있는지 확인하세요.
  • Verify that the monitor is receiving adequate power through the USB connection. Try using the second USB port for additional power or a different USB power source.
  • Check your device's display settings to ensure it is outputting video to the correct HDMI port.
• 터치 기능이 작동하지 않습니다:
  • Ensure the USB cable for touch is securely connected to the monitor's 'TOUCH' port and your device's USB port.
  • For Raspberry Pi, confirm that your operating system is configured to support touch input. Refer to your OS documentation.
  • For Windows, ensure no conflicting touch drivers are installed. Reconnect the USB touch cable.
• 화면 깜빡임/불안정한 디스플레이:
  • This often indicates insufficient power. Ensure the monitor is receiving stable power, potentially using both USB power inputs or a higher current USB power supply.
  • HDMI 케이블에 손상이나 연결 불량이 있는지 확인하십시오. 가능하다면 다른 HDMI 케이블을 사용해 보십시오.
• Backlight Too Dim/Bright:
  • Use the 'BACKLIGHT' button on the rear of the monitor to adjust the brightness level.
• Image Quality Issues (Blurry, Incorrect Colors):
  • Ensure your device's display resolution is set to 1280x800 for optimal clarity.
  • Check the HDMI cable for proper connection and integrity.

보증 및 지원

ELECROW products are manufactured to high-quality standards. For warranty information, please refer to the specific terms provided at the time of purchase or on the official ELECROW website. If you encounter any issues not covered in this manual or require further assistance, please contact ELECROW customer support.

고객 지원 이메일: support@elecrow.com

Please provide your product model number (DIS85801D) and a detailed description of the issue when contacting support.