1. 서론
Thank you for choosing the Fuxtec 40V Cordless Lawn Mower E2RM37. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new lawn mower. Please read this manual thoroughly before first use and keep it for future reference.
Figure 1: Fuxtec 40V Cordless Lawn Mower E2RM37 with included batteries and charger.
2. 안전 정보
Always observe basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury. This includes, but is not limited to:
- 작동하기 전에 모든 지침을 주의 깊게 읽으십시오.
- 눈 보호구와 튼튼한 신발을 포함한 적절한 개인 보호 장비(PPE)를 착용하십시오.
- 작업 구역에 잔해물이나 다른 사람, 특히 어린이와 애완동물이 없는지 확인하십시오.
- 습한 환경이나 비가 올 때는 잔디 깎는 기계를 작동하지 마십시오.
- Always remove the safety key and batteries before cleaning, adjusting, or performing maintenance.
- 손과 발을 절단면에서 멀리하십시오.
3. 패키지 내용
포장을 풀 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.
- Fuxtec 40V Cordless Lawn Mower E2RM37 unit
- 2 x 20V 리튬 이온 배터리
- 듀얼 충전기
- Grass Catcher (40 Liters)
- 핸들 어셈블리
- 안전 키
- 사용 설명서 (본 문서)
Figure 2: The Fuxtec FX-E2RM37 lawn mower with its 2x 20V 4Ah batteries and dual charger.
4. 설치 및 조립
The Fuxtec E2RM37 lawn mower requires minimal assembly. Follow these steps:
- 핸들 어셈블리: Attach the lower handle to the mower body using the provided bolts and knobs. Secure the upper handle to the lower handle, ensuring all cables are properly routed and not pinched.
- 잔디 수집기 어셈블리: Assemble the grass catcher according to the instructions provided with the catcher. Once assembled, hook it onto the rear of the mower.
- 배터리 충전: Insert the 20V Lithium-Ion batteries into the dual charger. Connect the charger to a suitable power outlet. The indicator lights on the charger will show the charging status. Charge batteries fully before first use.
- 배터리 설치: Open the battery compartment cover on the mower. Insert both fully charged 20V batteries into their respective slots. Ensure they click into place.
- 안전 열쇠: Insert the safety key into its designated slot in the battery compartment. The mower will not operate without the safety key inserted.
Figure 3: Proper insertion of the two 20V batteries into the mower's battery compartment.
5. 사용 설명서
5.1. 절단 높이 조정
The Fuxtec E2RM37 offers a variable cutting height from 25mm to 75mm. To adjust, locate the height adjustment lever on the side of the mower. Pull the lever outwards and move it to the desired position. Ensure all four wheels are at the same height setting for an even cut.
Figure 4: The mower features a cutting height range of 25-75mm for versatile lawn care.
5.2. 잔디 깎는 기계 시동 및 정지
모어를 시작하려면:
- 안전 키가 완전히 삽입되었는지 확인하십시오.
- Press and hold the safety button (usually on the handle).
- While holding the safety button, pull the bail lever (gas lever) towards the handle. The motor will start.
- Release the safety button, but continue to hold the bail lever to keep the mower running.
To stop the mower, simply release the bail lever. The blade will stop rotating within a few seconds.
5.3. 예초 요령
- 최상의 결과를 얻으려면 마른 잔디를 깎으세요.
- 한 번에 잔디 길이의 3분의 1 이상을 자르지 마십시오.
- 완전히 덮이도록 절단 경로를 약간 겹치게 하십시오.
- The mower has a 37cm cutting width, suitable for efficient coverage of medium-sized lawns.
- The 40L grass catcher allows for extended mowing sessions before needing to be emptied.
Figure 5: Key features include an adjustable handle, a 40-liter grass catcher, and cutting height adjustment.
Figure 6: The mower's 37cm cutting width ensures efficient lawn care.
Figure 7: The 40-liter grass catcher minimizes interruptions for emptying.
6. 유지관리
Regular maintenance ensures the longevity and optimal performance of your Fuxtec lawn mower.
6.1. 청소
- 청소하기 전에 항상 안전 키와 배터리를 제거하십시오.
- Clean the underside of the mower and the blade area after each use to prevent grass buildup. Use a brush or scraper.
- 광고로 외부를 닦다amp cloth. Do not use high-pressure water or immerse the mower in water.
- 잔디 수거통을 정기적으로 비우고 청소하십시오.
Figure 8: The underside of the mower, showing the cutting blade, which should be cleaned after each use.
6.2. 블레이드 관리
- 잔디깎는 날의 날카로움과 손상 여부를 정기적으로 점검하십시오. 무딘 날은 잔디를 찢어 잔디밭을 손상시킬 수 있습니다.
- If the blade is dull, it can be sharpened or replaced. Consult a qualified service technician for blade sharpening or replacement.
- 과도한 진동을 방지하기 위해 날을 세운 후 칼날의 균형을 확인하세요.
6.3. 배터리 관리
- 직사광선이나 극한의 온도를 피하고 서늘하고 건조한 곳에 배터리를 보관하십시오.
- 완전히 방전된 배터리를 장기간 보관하지 마십시오. 사용하지 않을 때는 주기적으로 충전하십시오.
- Use only the original Fuxtec charger for charging.
- The Fuxtec 20V battery system is designed for compatibility across multiple Fuxtec tools.
Figure 9: The Fuxtec 20V battery system offers compatibility with a range of Fuxtec power and garden tools.
7. 문제 해결
This section addresses common issues you might encounter with your Fuxtec lawn mower.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 잔디 깎는 기계가 시동되지 않습니다. |
|
|
| 잔디깎이 기계가 작동 중에 멈춥니다. |
|
|
| 고르지 않게 잘림. |
|
|
| 과도한 진동. |
|
|
8. 사양
Technical specifications for the Fuxtec 40V Cordless Lawn Mower E2RM37:
| 특징 | 세부 사항 |
|---|---|
| 모델 | FX-E2RM37SET |
| 전원 | 40V (2x 20V Lithium-Ion Batteries) |
| 절단 폭 | 37cm |
| 절단 높이 조정 | 25 - 75 mm (Variable) |
| 잔디 포수 용량 | 40리터 |
| 무게 | Approx. 15 kg (without batteries) / 19 kg (packaged) |
| 모터 유형 | 모터 |
| 소음 수준 | 91데시벨 |
| 배터리 런타임 | Up to 55 minutes (depending on conditions) |
그림 10: 이상view of the Fuxtec E2RM37's technical specifications.
9. 보증 및 지원
Fuxtec products are designed for durability and performance. For warranty information and customer support, please refer to the official Fuxtec website or contact their customer service directly. As a company based in Germany, Fuxtec offers dedicated technical support and long-term availability of spare parts.
For further assistance, you can visit the Fuxtec store on Amazon: Fuxtec Amazon Store.
Figure 11: Fuxtec is a European company committed to quality and customer satisfaction.
