1. 서론
This manual provides comprehensive instructions for the safe and efficient operation, maintenance, and troubleshooting of your KATOOL KT-T830 Tire Changer and KT-B760 Wheel Balancer Combo Machine. This professional-grade equipment is designed for tire repair and maintenance, offering robust performance for various wheel and tire sizes.
Figure 1: KATOOL KT-T830 Tire Changer and KT-B760 Wheel Balancer Combo Machine.
2. 안전 정보
Always prioritize safety when operating heavy machinery. Read and understand all safety warnings and instructions before use. Failure to do so may result in serious injury or equipment damage.
- Ensure the machine is installed on a level, stable surface.
- Always wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and steel-toed boots.
- 유지관리나 조정을 하기 전에 전원을 분리하세요.
- 움직이는 부품에 손과 의복을 가까이 하지 마십시오.
- Do not exceed the specified maximum wheel dimensions or weight.
- Ensure proper air pressure supply for the tire changer.
- 교육을 받은 직원만 이 장비를 작동해야 합니다.
3. 설정 및 설치
3.1 풀기 및 검사
Carefully unpack all components. Verify that all items listed in the "What's in the Box" section are present and undamaged. Report any discrepancies to your supplier immediately.
- Tire Changer KT-T830
- Wheel Balancer KT-B760
- 플라스틱 커버가 있는 장착 헤드
- Bead breaker spade cover
- 인플레이션 게이지
- Assist arm components
- Wheel balancer accessories (cones, quick-release nut, calipers, weights, etc.)
Figure 2: KT-T830 Tire Changer highlighting larger disk, easier operation, and stronger material.
3.2 사이트 준비
Choose a location with sufficient space for operation and maintenance, a stable concrete floor, and access to appropriate power and air supply.
그림 3: 설치 계획을 위한 치수 도면.
3.3 Electrical and Air Connections
- Connect the tire changer and wheel balancer to a dedicated 120V 1PH power supply.
- Connect the tire changer to an air compressor capable of supplying 0.8-1.0 Mpa (116-145 psi) of air pressure. Ensure an air filter/lubricator is installed in the air line.
3.4 조립
Assemble the assist arm, mounting head, and other components as per the assembly diagrams provided in the separate assembly guide (not included in this manual). Ensure all fasteners are securely tightened.
그림 4: 이상view of newly upgraded components including bigger disk, larger cylinder, and improved assist arm.
4. 사용 설명서
4.1 KT-T830 Tire Changer Operation
- 준비: Ensure the tire changer is powered on and connected to the air supply. Lubricate the tire bead and rim edge.
- Bead Breaking: Position the wheel on the turntable. Use the bead breaker shovel and pedal control to break both the upper and lower beads from the rim.
- Clamping: Place the wheel on the turntable and use the foot pedals to clamp the rim securely from the outside (12"-22") or inside (14"-24").
- Tire Removal: Position the mounting head. Use the assist arm if necessary. Pry the tire bead over the mounting head using a tire lever while rotating the turntable via the foot pedal. Repeat for the second bead.
- 타이어 설치: Lubricate the new tire's beads. Position the tire on the rim. Use the mounting head and assist arm to guide the tire onto the rim while rotating the turntable.
- 인플레이션: Inflate the tire using the integrated inflation gauge with pedal control. Ensure the bead seats properly. Do not overinflate.
4.2 KT-B760 Wheel Balancer Operation
Figure 5: KT-B760 Wheel Balancer featuring automatic measurement ruler for inputting A and D values.
- 휠 장착: Select the appropriate cone and mount the wheel securely onto the balancer shaft. Tighten the quick-release nut.
- Inputting Data: Use the automatic measurement ruler to input the A (distance), D (diameter), and W (width) values. Select the desired balancing mode (e.g., static, dynamic, ALU modes).
- 측정 시작: Lower the wheel guard (if equipped) and press the START button. The wheel will spin and the machine will calculate the imbalance.
- Applying Weights: The display will indicate the amount and location of weights required. Rotate the wheel to the indicated position and apply the correct weights to the inner and outer rim flanges.
- 다시 확인: Spin the wheel again to verify the balance. Repeat the process if necessary until the display shows zero or minimal imbalance.
Figure 6: KT-B760 Wheel Balancer in operation with a wheel mounted.
5. 유지관리
정기적인 유지보수는 KATOOL 장비의 수명 연장과 최적의 성능을 보장합니다.
- 일일: Clean the machine surfaces. Check air lines and connections for leaks.
- 주간: Lubricate moving parts of the tire changer, especially the clamping jaws and assist arm pivots. Check the oil level in the air lubricator.
- 월간 간행물: Inspect all electrical connections for wear or damage. Check the tightness of all bolts and fasteners. Clean the wheel balancer shaft and cones.
- 매년: Perform a self-calibration on the wheel balancer. Inspect the motor and belts for wear.
6. 문제 해결
This section provides solutions to common issues. For problems not listed here, contact KATOOL customer support.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Tire Changer not clamp잉 | Low air pressure; clogged air filter; worn cylinder seals. | Check air supply; clean/replace air filter; contact service for seal replacement. |
| Wheel Balancer inaccurate readings | Incorrect data input; machine not calibrated; dirty shaft/cones; unstable mounting. | Verify input values; perform self-calibration; clean shaft/cones; re-mount wheel securely. |
| 기계 전원이 켜지지 않습니다 | No power supply; tripped circuit breaker; faulty power switch. | Check power outlet/cord; reset breaker; contact service. |
7. 사양
7.1 KT-T830 Tire Changer
| 사양 | 값 |
|---|---|
| 최대 휠 직경 | 41인치 / 1040mm |
| Max Wheel Width | 15인치 / 380mm |
| 외부 Clamp | 12인치 - 22인치 |
| 내부 Clamp | 14인치 - 24인치 |
| 전원 공급 장치 | 120V 1상 |
| 모터 파워 | 2.0HP / 1.5KW |
| 회전 속도 | 6.8 회전/분 |
| 공기압 | 0.8 - 1.0 MPa (116-145 psi) |
| 순중량 | 240킬로그램 |
7.2 KT-B760 Wheel Balancer
| 사양 | 값 |
|---|---|
| 림 직경 | <30" |
| 휠 폭 | 3인치 - 12인치 |
| 휠 직경 | <880mm |
| 속도 균형 | 180 분당 |
| 전원 공급 장치 | 120V 1상 |
| 모터 파워 | 0.25KW |
| Rim Center Hole Dia. | <135mm |
| 휠 무게 | <65kg |
| 균형 정확도 | ±1g |
| 시간 측정 | 7초 |
Figure 7: Comparison of KATOOL's latest features against other models, highlighting superior specifications.
8. 보증 및 지원
KATOOL provides a 12개월 보증 on all parts for both the KT-T830 Tire Changer and the KT-B760 Wheel Balancer from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For technical support, warranty claims, or spare parts, please contact KATOOL customer service through the vendor from whom you purchased the product or visit the official KATOOL web연락처 정보 사이트.
Please have your model number (KT-T830 & KT-B760) and purchase date available when contacting support.
