Sylvania A19 LED Light Bulbs Instruction Manual

1. 서론

Thank you for choosing Sylvania A19 LED Light Bulbs. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.

2. 제품 오버view

This package includes a combination of Sylvania A19 LED light bulbs designed to replace traditional incandescent bulbs. You will find both 40W equivalent (6W, 450 lumens) and 60W equivalent (8.5W, 800 lumens) bulbs, all featuring a soft white (2700K) color temperature and a standard medium (E26) base.

Image 1: Sylvania A19 LED Light Bulbs, showing both 40W and 60W equivalent bulbs in their packaging.

These energy-efficient bulbs offer instant illumination, long lifespan, and are free from UV/IR emissions, mercury, and lead.

3. 안전 정보

• 감전 위험: 전구를 점검, 설치 또는 제거하기 전에 항상 조명기구의 전원을 끄십시오.
• 실내에서만 사용 가능: These bulbs are designed for indoor use in dry locations. Do not use in wet or damp environments unless the fixture is specifically rated for such conditions.
• 밀폐형 조명기구에는 사용할 수 없습니다. Avoid using these bulbs in fully enclosed fixtures, as this can shorten their lifespan due to heat buildup.
• 비조광: These bulbs are non-dimmable. Do not use with dimmer switches, as this may cause damage to the bulb or dimmer.
• 작동 온도: Suitable for operation in temperatures between -20°C and +40°C (-4°F and +104°F).
• 무게: Do not use in fixtures where the bulb's weight might exceed the fixture's capacity.

4. 설정 및 설치

Installation of Sylvania A19 LED light bulbs is straightforward. Follow these steps:

1. 전원 끄기: 조명 기구를 제어하는 ​​전등 스위치 또는 차단기를 찾아 전원을 완전히 차단하십시오.
2. 오래된 전구 제거: 기존 전구를 조명기구에서 조심스럽게 빼냅니다. 최근에 사용한 전구라면 식히세요.
3. 새 LED 전구를 삽입하세요: Gently screw the Sylvania A19 LED bulb into the socket until it is snug. Do not overtighten.
4. 복원력 : 스위치나 회로 차단기를 통해 전원을 다시 켜세요.
5. 시험: 전등 스위치를 켜서 전구가 제대로 켜지는지 확인하세요.

Image 2: A set of four Sylvania A19 LED light bulbs, ready for installation.

5. 사용 설명서

Sylvania A19 LED light bulbs operate like traditional bulbs. Once installed, simply use the wall switch or fixture switch to turn the light on or off. These bulbs provide instant full brightness with no warm-up time.

6. 유지관리

These LED bulbs require minimal maintenance due to their long lifespan of up to 11,000 hours.

• 청소: 전구를 청소하려면 전원이 꺼져 있고 전구가 식었는지 확인하십시오. 부드럽고 마른 천으로 살살 닦아주세요. 액체 세제나 연마성 재질은 사용하지 마십시오.
• 대사: When the bulb reaches the end of its life, follow the installation steps in Section 4 to replace it with a new Sylvania A19 LED bulb. Dispose of old bulbs according to local regulations.

7. 문제 해결

If your Sylvania A19 LED bulb does not light up after installation, consider the following:

• 전원 없음: Check if the light switch is in the 'ON' position. Verify that the circuit breaker for the fixture has not tripped.
• 느슨한 연결: Turn off the power, then carefully re-screw the bulb into the socket to ensure a secure connection.
• Incorrect Fixture: Ensure the fixture is compatible with A19 bulbs and has a medium (E26) base.
• 조절 스위치: Confirm that the fixture is not connected to a dimmer switch, as these non-dimmable bulbs are not compatible.
• Damaged Bulb: If the above steps do not resolve the issue, the bulb may be faulty. Replace it with a new one.

8. 사양

9. 보증 및 지원

For warranty information or technical support, please refer to the packaging or contact LEDVANCE customer service directly. Keep your purchase receipt as proof of purchase.