소개
이 설명서는 Blackstar HT-5RH MK III 5와트 기타 진공관 앰프를 안전하고 효율적으로 작동하는 데 필요한 정보를 제공합니다. amp head. Please read thoroughly before use.
안전 정보
안전한 작동을 보장하고 손상을 방지하려면 다음 안전 지침을 준수하세요.
- 항상 amp앰프는 접지된 전원 콘센트에 연결되어 있습니다.
- 노출시키지 마십시오 amp비 또는 습기에 대한 liifier.
- 주변에 적절한 환기가 되도록 하십시오. amplifier to prevent overheating. Do not obstruct ventilation grilles.
- Refer all servicing to qualified service personnel. Risk of electric shock. Do not open the amp리퍼 섀시.
- Disconnect the mains power cable before cleaning or servicing.
설정
Follow these steps to set up your HT-5RH MK III amp리퍼 헤드.
Connecting to a Speaker Cabinet
The HT-5RH MK III requires an external speaker cabinet. Ensure the speaker cabinet's impedance matches the amplifier의 출력.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, highlighting the speaker output jacks.
- Connect a speaker cable from one of the 스피커 출력 on the rear panel to your speaker cabinet.
- 그만큼 amplifier 제안 1 x 8 OHM OR 2 x 16 OHM 그리고 1 x 16 OHM outputs. Match the impedance of your cabinet to the correct output jack.
- Ensure a speaker is connected before powering on the amp손상을 방지하기 위해 lifier.
전원 연결
Connect the supplied mains power cable to the 메인 입력 on the rear panel and to a suitable power outlet.
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, showing the mains input.
컨트롤 및 기능
The front panel of your HT-5RH MK III features intuitive controls for shaping your tone.
Image: Front panel of the Blackstar HT-5RH MK III amplifier head, displaying all controls.
전면 패널 컨트롤
- 전원 스위치: 토글 ampliifier를 켜거나 끕니다.
- 5W / 0.5W Switch: Selects between 5-watt and 0.5-watt output power for different volume requirements.
- REVERB Level: Adjusts the amount of built-in reverb effect.
- OD EQUALISATION (ISF, TREBLE, MIDDLE, BASS): Tone stack for the Overdrive channel. The ISF (Infinite Shape Feature) control shifts the tone from a classic British sound (counter-clockwise) to a more aggressive American sound (clockwise).
- OVERDRIVE (VOLUME, GAIN, VOICE, SELECT): Controls for the Overdrive channel. 용량 adjusts the output level, 얻다 controls the amount of distortion, 목소리 selects different overdrive voicings, and 선택하다 switches between Clean and Overdrive channels.
- CLEAN (VOLUME, VOICE): Controls for the Clean channel. 용량 adjusts the output level, 목소리 selects different clean voicings.
- 입력: 기타 연결용 1/4인치 잭입니다.
후면 패널 연결
Image: Rear panel of the Blackstar HT-5RH MK III amplifier head, displaying all connections.
- USB 오디오 Connects to a computer for direct recording.
- SEND/RETURN (Effects Loop): For connecting external effects pedals. The 수준 switch adjusts the effects loop sensitivity (+4dBu/-10dBV).
- 풋스위치: Connects an optional footswitch for channel switching.
- 라인 입력 : 3.5mm input for connecting external audio sources like MP3 players.
- CABRIG OUTPUT (LINE OUT / PHONES): Emulated output for direct recording or headphones, with selectable cabinet simulations.
- 스피커 출력: Connects to external speaker cabinets (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- 주전원 입력: 전원 케이블 연결.
작동 지침
기본 동작
- 확인하십시오 amplifier is connected to a suitable speaker cabinet and power supply.
- 기타를 연결하십시오. 입력 잭.
- 켜다 힘 로 전환하다 ON. Allow a few moments for the tubes to warm up.
- Select your desired power output using the 5W / 0.5W 스위치.
- 사용하세요 깨끗한 channel controls (용량, 목소리) 또는 오버 드라이브 channel controls (용량, 얻다, 목소리, 선택하다) to achieve your desired tone.
Using the Effects Loop
The effects loop allows you to integrate external effects pedals into your signal chain.
- 연결하다 보내다 jack to the input of your effects pedal.
- Connect the output of your effects pedal to the 반품 잭.
- 조정하다 수준 switch (+4dBu for rack effects, -10dBV for stompboxes) to match your pedal's output.
녹음과 무음 연습
- USB 오디오 USB 케이블을 연결하세요. amplifier to your computer. The amplifier will appear as an audio interface, allowing direct recording.
- CABRIG Output: 조용한 연습을 위해 헤드폰을 연결하세요. CABRIG OUTPUT. This output also provides emulated cabinet tones for direct recording to a mixer or audio interface.
- MP3/Line Input: 외부 오디오 장치(예: MP3 플레이어, 휴대폰)를 연결하세요. 라인 인 jack to play along with backing tracks.
전력 절감
그만큼 5W / 0.5W switch allows you to reduce the amplifier's output power, making it suitable for lower volume practice or recording while retaining tube tone.
유지
- 유지하다 amplifier clean by wiping with a dry, soft cloth.
- 노출을 피하십시오 amp극한의 온도나 습도에 적응합니다.
- 모든 케이블 연결부가 안전하게 고정되었는지 정기적으로 점검하세요.
- Tube replacement should be performed by qualified service personnel.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 소리가 나지 않습니다 | Power not on, speaker not connected, guitar cable faulty, volume low. | Check power switch, ensure speaker is connected, test guitar cable, increase volume controls. |
| 약하거나 왜곡된 소리 | Faulty tubes, incorrect impedance match, effects loop issue. | Consult qualified technician for tube check, verify speaker impedance, bypass effects loop to test. |
| 윙윙거리는 소리 또는 소음 | Ground loop, faulty cables, proximity to interference. | Try different power outlets, use shielded cables, move away from electronic devices. |
명세서
- 모델: HT5RHMK3
- 출력 와트tage: 5 와트 RMS
- 튜브: 12BH7 (Power Amp)
- 채널: 2 (클린, 오버드라이브)
- 통제 수단: Power, 5W/0.5W Switch, Reverb Level, ISF, Treble, Middle, Bass, Overdrive Volume, Gain, Voice, Select, Clean Volume, Voice.
- 입력: Guitar Input, MP3/Line Input.
- 출력: USB Audio, Effects Loop (Send/Return with Level), Footswitch, CabRig Output (Line Out/Headphones), Speaker Outputs (1x8 Ohm or 2x16 Ohm, 1x16 Ohm).
- 치수: 12.36 x 10.2 x 22.32 인치
- 품목 무게: 19.94파운드
- 전원: 코드식 전기
- 재료: 스테인리스 스틸
보증 및 지원
보증 정보 및 기술 지원에 대해서는 블랙스타 공식 웹사이트를 참조하십시오. Amp화 web해당 웹사이트를 방문하거나 가까운 대리점에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
제품 비디오
블랙스타 HT-5 기타 Amplifier Sound Review
Video: A sound review of the Blackstar HT-5 Guitar Amplifier, demonstrating its tonal capabilities.
OriPure 15W Tube Guitar Amplifier Head OA-H15 (Seller Video)
Video: A demonstration of the OriPure 15W Tube Guitar Amplifier Head OA-H15, showcasing its features and sound. Note: This is a seller-provided video for a related product.
