RAINPOINT Sprinkler Timer User Manual

소개

Thank you for choosing the RAINPOINT Sprinkler Timer. This programmable water timer is designed to simplify your garden and lawn watering, offering automatic, manual, and rain delay modes. With its easy-to-read LCD screen and intuitive controls, managing your irrigation has never been easier. This manual provides detailed instructions for setting up, operating, and maintaining your new sprinkler timers.

Image: Two RAINPOINT Sprinkler Timers, highlighting their compact design and digital displays.

안전 정보

• Do not immerse the timer in water. It is designed to be water-resistant (IP54), not submersible.
• Use only 2 AAA alkaline batteries (not included). Do not mix old and new batteries or different battery types.
• 모든 연결 부분이 단단히 조여져 누수가 발생하지 않도록 하세요.
• Do not expose the timer to freezing temperatures. Remove from faucet and store indoors during winter.
• 어린이의 손이 닿지 않는 곳에 보관하세요.

패키지 내용

• RAINPOINT Sprinkler Timer (x2)
• 사용 설명서(x1)

메모: 2 AAA alkaline batteries are required for each timer and are not included in the package.

설정

1. 배터리 설치

1. 타이머 뒷면에서 배터리 구획을 찾으세요.
2. 배터리 트레이를 밀어서 빼내세요.
3. 극성(+/-)을 확인하여 AAA 알칼리 건전지 2개를 새로 넣으십시오.
4. Slide the battery tray back into the compartment until it clicks securely.

2. 타이머를 수도꼭지에 부착하기

1. 수도꼭지가 깨끗하고 이물질이 없는지 확인하십시오.
2. Screw the timer's inlet (top connector) onto your outdoor faucet or hose bib. Hand-tighten only. Do not overtighten.
3. The timer features an upgraded anti-leakage design with increased thread engagement for a tighter fit.

Image: The sprinkler timer connected to a faucet, illustrating its anti-leakage design and built-in metal filter for debris prevention.

3. 호스 연결하기

1. 정원용 호스를 타이머의 배출구(하단 연결부)에 나사로 고정하십시오. 손으로만 조이세요.
2. The timer is designed to withstand up to 116 PSI water pressure.

작동 지침

The RAINPOINT Sprinkler Timer features a large LCD screen and a rotary dial for easy programming. The dial allows you to select different modes, and the buttons below the screen are used for adjustments.

이미지: 클로즈업 view of the timer's large LCD display and user-friendly rotary dial, emphasizing ease of setup and reading.

1. 시계 설정

• 다이얼을 "시계 설정"으로 돌립니다.
• Use the "+" and "-" buttons to adjust the current time.
• Press "OK" to confirm and move to the next setting.

2. 자동 급수 프로그래밍

This mode allows you to set a customized watering schedule.

1. Turn the dial to "START TIME". Use "+" and "-" to set the desired start time for watering. Press "OK".
2. Turn the dial to "HOW LONG". Set the watering duration from 1 minute to 3 hours 59 minutes. Press "OK".
3. Turn the dial to "HOW OFTEN". Choose the watering frequency:
   • Every 1h to 12h (e.g., every 6 hours)
   • Every 1 day to 7 days (e.g., every 2 days)
   Press "OK".
4. Turn the dial to "ON" to activate the programmed schedule.

Image: The timer's display showing options for setting watering duration and frequency, including hourly and daily cycles.

3. 수동 급수 모드

Use this mode for immediate, on-demand watering without affecting your programmed schedule.

• Turn the dial to "ON".
• "MANUAL" 버튼을 누르세요.
• Use "+" and "-" to set the desired manual watering duration (1 minute to 8 hours).
• Press "OK" to start manual watering. The timer will automatically return to its programmed schedule after the manual watering is complete.

Image: A person manually watering a garden using the RAINPOINT Sprinkler Timer, demonstrating the manual mode functionality.

4. 강우 지연 모드

This feature allows you to pause your watering schedule during rainy periods to conserve water and prevent overwatering.

• Turn the dial to "ON".
• Press the "DELAY +" button.
• Each press will increase the delay by 24 hours (options: 24h, 48h, 72h).
• 선택한 지연 시간이 지나면 타이머가 자동으로 설정된 일정대로 작동합니다.

Image: The sprinkler timer displaying a rain delay countdown, set against a backdrop of a rainy garden, illustrating its water-saving feature.

5. 타이머 끄기

• Turn the dial to "OFF". This will stop all watering programs.

유지

배터리 수명 및 교체

• The timer is designed for long battery life (up to 365 days).
• The LCD screen will display a low power indicator when batteries need replacement.
• When the battery is low, the valve will automatically close to prevent flooding and water waste.
• Replace batteries promptly when the low power indicator appears. Your programmed settings will be saved during battery replacement.

Image: The timer's display indicating low battery, with an icon showing the valve automatically closing to prevent flooding, emphasizing its low power auto-shutoff feature.

필터 청소

• The timer has a built-in metal filter at the inlet to prevent debris from entering the irrigation system.
• Periodically check and clean the filter to ensure optimal water flow and prevent blockages.
• Unscrew the timer from the faucet, remove the filter, rinse it under running water, and reinsert.

겨울 보관

• Before the first frost, remove the timer from the faucet.
• Drain any remaining water from the timer.
• Store the timer indoors in a dry, frost-free location.

문제 해결

명세서

• 상표: 레인포인트
• 모델: ITV 107 (Based on video information)
• 재료: 플라스틱
• 색상: 녹색
• 제품 크기: 5인치 깊이 x 4인치 너비 x 4.8인치 높이
• 품목 무게: 1.3 pounds (for the pack, likely)
• 전원: AAA 알카라인 배터리 2개(포함되지 않음)
• 물주기 시간: 1 minute to 3 hours 59 minutes (Automatic), 1 minute to 8 hours (Manual)
• 물주기 빈도: 1~12시간마다 또는 1~7일마다
• 비로 인한 연기 옵션: 24h, 48h, 72h
• 최대 수압: 116파운드
• 방수 기능: IP54

보증 및 지원

RAINPOINT products are designed for quality and reliability. For any questions, technical support, or warranty claims, please contact RAINPOINT customer service. Refer to the contact information provided in your product packaging or visit the official RAINPOINT web도움이 필요한 경우 사이트를 방문하세요.

또한 방문할 수 있습니다 RAINPOINT Store on Amazon 자세한 정보 및 지원 리소스를 확인하세요.