1. 안전 지침
- 사용하기 전에 모든 지침을 주의 깊게 읽으세요.
- 전원 공급 장치 볼륨을 확인하십시오.tage는 제품 사양과 일치합니다.
- Do not operate the pump dry. Always ensure the pump is fully submerged in water.
- 유지관리나 설치를 수행하기 전에 전원을 분리하세요.
- 컨트롤러를 건조한 상태로 유지하고 물이 튀지 않도록 하세요.
- 이 제품은 실내 수족관용으로만 설계되었습니다.
- 제품을 직접 수리하거나 개조하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
2. 제품 오버view
The AQQA Wave Maker is designed to create natural water movement in your aquarium, promoting a healthy environment for fish and corals. It features a multifunctional controller, strong magnetic suction, and a 360° rotating pump head.
주요 특징:
- Multifunctional Controller: Offers 5 ripple modes (M1/M2/M3/M4/M5), adjustable flow rate and frequency, backwash cleaning mode, and feeding function. Includes key button lock and light sensor.
- 다양한 용도: Suitable for 70-180 gallon freshwater and saltwater aquariums.
- 자동 청소 기능: Activates backwash cleaning to remove deposits and extend product life.
- 360° Direction Adjustment: Rotating pump head and movable magnetic base allow for versatile wave direction.
- Strong Magnetic and Silent Operation: Secure installation with strong magnetic suction cup and minimized vibrations for quiet performance.
구성 요소:
The AQQA Wave Maker consists of the pump unit, a controller, and a power adapter.
3. 설치 가이드
- 펌프 조립: Ensure all components (impeller, pump body, covers) are correctly assembled.
- 자석 받침대 부착: Connect the pump unit to the magnetic base. The strong magnetic suction cup allows for reliable adhesion to the aquarium wall.
- 펌프 위치: Place the pump unit inside the aquarium and align the external magnet on the outside glass. Adjust the position and angle for optimal water flow. The 360° rotating pump head allows for flexible placement.
- 컨트롤러에 연결: Plug the pump cable into the designated port on the controller.
- 전원 연결: Plug the power adapter into the controller, then into a power outlet.
설치 데모 영상:
Video 1: This video demonstrates the unboxing and installation process of a similar wave maker, including how to attach the magnetic mount and position the pump in the aquarium. It also shows adjustable flow and various modes.
4. 컨트롤러 기능
The intelligent controller allows for precise adjustment and control of the wave maker's operation.
- Frequency Setting Knob: Adjusts the wave frequency from Fast to Slow.
- Mode/Light Button: Press briefly to change the wave mode (M1-M5). Hold for 3 seconds to activate the light sensor.
- M/S/N/LOCK Button: Press briefly to select the control mode (Master/Slave/Normal). Hold for 3 seconds to activate the button lock.
- 속도/공급 버튼: Press briefly to increase the flow rate. Hold for 3 seconds for a 10-minute feeding stop.
- M6/Backwash Button: Press briefly to lower the flow rate. Hold for 3 seconds to activate the backwash cleaning mode.
5. 작동 모드
The AQQA Wave Maker offers 5 distinct wave modes to simulate natural aquatic environments.
- M1 (Constant Wave): 안정적이고 지속적인 흐름을 제공합니다.
- M2 (Pulse Wave): Generates intermittent pulses of flow.
- M3 (Anti-Synchronized Pulse Wave): Creates alternating pulses, ideal for dual pump setups.
- M4 (Sine Wave): Produces a smooth, oscillating flow pattern.
- M5 (Random Wave): Varies flow patterns randomly for a natural, unpredictable current.
- M6 (Reverse Wave / Backwash): Used for cleaning, pushing debris away from the pump.
Wave Mode Demonstration Video:
Video 2: This video illustrates the different wave modes (M1-M6) and their effects on water movement in an aquarium, demonstrating how each mode simulates various natural currents.
6. Adjustable Flow Rate and Frequency
The controller allows for fine-tuning of the water flow rate and wave frequency to suit your aquarium's specific needs.
- 유량 조정: Use the Speed/Feed button to increase or decrease the water flow intensity. The display will show the current flow rate percentage.
- 주파수 조정 : Rotate the Frequency Setting Knob to adjust the speed and pattern of the waves.
Adjustable Settings Demonstration Video:
Video 3: This video demonstrates how to adjust the flow rate and frequency using the controller, showcasing the impact of different settings on water movement in the aquarium.
7. 특별 기능
수유 모드:
To activate feeding mode, hold the Speed/Feed button for 3 seconds. The pump will pause for 10 minutes, allowing fish to feed without strong currents dispersing food. After 10 minutes, the pump will resume its previous operating mode.
Night Mode with Light Sensor:
The controller features a light sensor. Hold the Mode/Light button for 3 seconds to activate the light sensor. When the ambient light dims, the pump will automatically switch to a lower, constant flow mode (e.g., 30%) to simulate nighttime conditions and reduce stress on aquatic life.
Auto Cleaning Function (M6):
Press and hold the M6 button to activate the backwash cleaning mode. This function helps to dislodge and remove debris and deposits from the pump housing, maintaining efficiency and extending the lifespan of the wave maker.
360° Rotating Pump Head:
The pump head can be rotated 360 degrees, allowing you to direct the water flow precisely where needed to create optimal circulation patterns and eliminate dead spots in your aquarium.
8. 유지관리
Regular cleaning is essential to ensure optimal performance and longevity of your AQQA Wave Maker.
- 전원 분리: Always unplug the power adapter before cleaning.
- 수족관에서 제거: 수조에서 펌프 장치를 조심스럽게 꺼내십시오.
- 분해: Gently twist and pull apart the front cover, impeller, and pump body.
- 깨끗한 구성 요소: Rinse all parts under clean water. Use a soft brush to remove any algae, debris, or calcium buildup from the impeller, impeller shaft, and pump housing. For stubborn buildup, a mild vinegar solution can be used, followed by thorough rinsing.
- 검사: Check the rubber rings and suction cups for wear or damage. Replace if necessary.
- 재조립: Carefully reassemble all components, ensuring they fit securely.
- 재설치: Place the cleaned pump back into the aquarium and reconnect power.
9. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 작동하지 않습니다 | No power; Impeller jammed; Controller issue. | Check power connection; Clean impeller; Contact support. |
| 약한 물 흐름 | Impeller dirty; Flow rate set too low; Air in pump. | Clean impeller; Increase flow rate on controller; Gently shake pump to release air. |
| 과도한 소음/진동 | Impeller dirty/damaged; Improper installation; Air in pump. | Clean/inspect impeller; Re-position pump securely; Gently shake pump to release air. |
| 컨트롤러 디스플레이가 작동하지 않습니다 | No power; Controller damaged. | Check power connection; Contact support. |
| Feeding mode not activating | 버튼을 충분히 오래 누르지 않았습니다. | Hold Speed/Feed button for 3 seconds. |
| 조도 센서가 작동하지 않습니다 | Sensor not activated; Sensor blocked. | Hold Mode/Light button for 3 seconds; Ensure sensor is clear. |
10. 사양
- 모델 번호: 에이큐099
- 전력(최대): 23와트
- 출력 볼륨tage: 직류 24V 1.0A
- Flow Rate (Max): 2113 GPH(8000L/H)
- 권장 탱크 크기: 70~180갤런(265~681리터)
- 재료: 플라스틱
- 색상: 검은색
- 품목 무게: 939g
- 전원: 코드식 전기
11. 보증 및 고객 지원
For warranty information, product support, or technical assistance, please refer to the product packaging or contact AQQA customer service directly. Keep your purchase receipt as proof of purchase.
