CNBINGO M1-202W Double Touch Rocker Switch User Manual

소개

This manual provides detailed instructions for the installation, operation, and maintenance of your CNBINGO M1-202W Double Touch Rocker Switch. This product features a sleek glass panel, touch control, and 2-way switching capability, allowing a single light to be controlled from two different locations. Please read this manual thoroughly before installation and use to ensure safe and correct operation.

중요한 안전 정보

Please observe the following safety precautions to prevent electric shock, fire, or damage to the product:

• 전기 설치: All electrical work should be performed by a qualified electrician and in accordance with local electrical codes and regulations. Always disconnect power at the circuit breaker before installation or maintenance.
• 제품 유형: This is a standard 2-way rocker switch. It is ~ 아니다 a dimmer switch and is ~ 아니다 compatible with smart home systems like Alexa or Wi-Fi.
• 회로 기판: Do not touch the internal circuit board before the glass panel is securely installed. Touching the circuit board prematurely may cause malfunction.
• Secure Touch System: The switch features a high-speed 40ms touch system with tempered glass, designed to be resistant to fire, scratches, and electric shock. It is safe to touch even with wet hands, but caution is always advised when dealing with electricity.

제품 끝view

The CNBINGO M1-202W Double Touch Rocker Switch is designed for modern interiors, offering reliable functionality and a sleek aesthetic.

Dimensions and Installation Requirements

• 스위치 치수: 86 mm (Length) x 86 mm (Width) x 26 mm (Depth).
• 벽면 박스 호환성: Requires a standard wall box with a minimum depth of 30 mm and a diameter of 60 mm.

상태 LED 표시기

Each touch button on the switch is equipped with a backlight. A strong or weak blue light indicates the ON/OFF status of the connected light. This feature ensures visibility in the dark without disturbing sleep.

설정 및 설치

The CNBINGO M1-202W switch is designed for easy installation. No neutral wire is required for its operation.

Wiring Diagram for 2-Way Switching

For 2-way switching, a communication wire must be connected between the two switches. Refer to the diagram below for correct wiring.

설치 단계

1. 전원 분리: 전기 작업을 시작하기 전에 회로 차단기에서 해당 회로의 주 전원을 차단했는지 확인하십시오.
2. 벽면 박스를 준비하세요: Ensure your wall box meets the minimum depth of 30mm and a diameter of 60mm.
3. 와이어 연결: Connect the live wire, neutral wire (if applicable, though not required for basic operation), and the communication wire (for 2-way setup) to the corresponding terminals on the switch. Refer to the circuit diagram.
4. 마운트 스위치: Secure the switch module into the wall box using screws.
5. Install Glass Panel: Carefully attach the glass panel to the switch module. Ensure it clicks into place securely. Important: Do not touch the switch buttons before the glass panel is installed.
6. 복원력 : 회로 차단기에서 주전원을 다시 켜세요.

작동 지침

Basic ON/OFF Operation

Simply touch the designated area on the glass panel to turn the connected light ON or OFF. The blue LED indicator will change intensity to reflect the current status.

2-Way Switching Functionality

This switch supports 2-way control, allowing you to operate a single light fixture from two different switch locations. To pair two switches for 2-way functionality:

1. Ensure both switches are from the same series.
2. Long press the touch button on one of the switches until you hear a beep or see a specific indicator change (refer to specific product instructions if provided with the physical product).
3. Within a few seconds, operate the other switch (e.g., touch it once). The switches should now be paired for 2-way control.

유지

To ensure the longevity and optimal performance of your CNBINGO touch switch, follow these simple maintenance guidelines:

• 청소: 부드러운 수세미로 유리 패널을 닦으세요.amp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the glass or internal components.
• 점검: 스위치에 손상이나 느슨한 연결이 있는지 정기적으로 점검하세요. 문제가 발견되면 전원을 분리하고 자격을 갖춘 전기 기술자에게 문의하세요.
• 충격 방지: While the tempered glass is durable, avoid strong impacts that could crack or shatter the panel.

문제 해결

If you encounter issues with your CNBINGO M1-202W switch, refer to the following common problems and solutions:

• 설치 후 스위치가 작동하지 않음:
  • Ensure the glass panel was installed ~ 전에 touching any switch buttons. If not, disconnect power, remove the glass panel, re-attach it, and then restore power.
  • Try cutting the main power to the circuit for a few minutes and then restarting it. This can often resolve minor electronic glitches.
• Light Flickers or Does Not Turn Off Completely:
  • This switch is not a dimmer. Ensure you are not attempting to use it with dimmable lights or in a circuit designed for dimming.
  • Verify that the connected load (light bulb) is compatible with a standard ON/OFF switch.
• 2-Way Pairing Fails:
  • Ensure both switches are from the same CNBINGO series and are designed for 2-way operation.
  • Re-attempt the pairing process carefully, ensuring the long press and subsequent touch on the second switch are performed correctly and within the specified timeframe.
  • Check the communication wire connection between the two switches as per the wiring diagram.
• No Power to Switch:
  • Check the circuit breaker to ensure power is supplied to the switch's circuit.
  • Verify all wire connections (Live, Neutral, Load) are secure and correctly wired according to the diagram.

이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.

명세서

보증 및 지원

CNBINGO products are manufactured to high-quality standards. For warranty information or technical support, please refer to the documentation included with your purchase or contact CNBINGO customer service through their official channels. Please have your model number (M1-202W) and purchase details ready when contacting support.