소개
This manual provides detailed instructions for the BFT MITTO COOL C4 4-channel transmitter. It covers setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before using the transmitter.
제품 끝view
그림 1: 전면 view of the BFT MITTO COOL C4 4-channel transmitter, showing the four control buttons and the BFT logo.
그림 2: 뒤로 view of the BFT MITTO COOL C4 4-channel transmitter, displaying regulatory marks, model name, and battery specifications.
설정
1. 배터리 설치
The BFT MITTO COOL C4 transmitter requires one LR44 battery, which is included. To install or replace the battery:
- Locate the battery compartment on the back of the transmitter (refer to Figure 2).
- 조심스럽게 수납공간 덮개를 엽니다.
- LR44 배터리를 삽입할 때 극성(+/-)을 정확히 확인하십시오.
- 배터리 덮개를 단단히 닫으세요.
2. Programming/Cloning the Transmitter
The BFT MITTO COOL C4 can clone existing BFT remote controls already programmed on your system. This process does not require you to be at the gate system during cloning. Only the 4-button version has a repeat (cloning) function. Only Original BFT remote controls can be cloned.
중요한: Access to the receiver/opener is required for initial setup or if cloning from a non-original remote. Please ensure you have access to your receiver/opener before purchase or attempting to program.
Compatible models for cloning include: BFT MITTO COOL C2, MITTO COOL C4, STYLE C4, MITTO2, MITTO4, MITTO2A, MITTO4A, MITTTO B RCB 02/04, KLEIO B RCA 02/04, TRC1, TRC2, TRC3. An old Original BFT remote control BFT MITTTO B RCB 02/04 can also be cloned.
Refer to your gate system's receiver manual for specific programming steps, as procedures may vary. Generally, cloning involves placing the new transmitter in close proximity to the existing, programmed transmitter and following a sequence of button presses.
작동 지침
The BFT MITTO COOL C4 is a 4-channel transmitter, meaning it can control up to four different functions or devices (e.g., opening/closing a gate, pedestrian access, lighting). Each button corresponds to a specific channel.
- 버튼 기능: Press the desired button to activate the corresponding function. The specific function of each button is determined during the programming process with your receiver.
- 범위: The transmitter offers a significant operating range, typically up to 50 meters, depending on environmental conditions and receiver sensitivity.
- 날씨 저항성: The transmitter is designed to be weather-resistant, allowing for reliable operation in various outdoor conditions.
유지
배터리 교체
When the transmitter's range decreases or the indicator light (if present) becomes dim or unresponsive, it may be time to replace the LR44 battery. Follow the battery installation steps outlined in the 'Setup' section.
청소 및 보관
- 송신기를 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- Store the transmitter in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Avoid dropping the transmitter or subjecting it to strong impacts.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Transmitter not working / No response | 배터리 부족 또는 방전 제대로 프로그래밍되지 않았습니다 범위를 벗어남 Obstruction between transmitter and receiver | 배터리를 교체하세요 Re-program the transmitter (refer to 'Setup' section) 수신기에 더 가까이 다가가세요 Ensure clear line of sight to receiver |
| 작동 범위 감소 | 배터리 부족 다른 장치의 간섭 Environmental factors (e.g., thick walls, metal structures) | 배터리를 교체하세요 간섭의 원인을 파악하고 제거하십시오. Try operating from a different position |
| Cloning fails | Source remote is not an Original BFT remote Incorrect cloning procedure New transmitter is not a 4-button version Insufficient access to receiver for initial programming | Ensure source remote is an Original BFT remote Review and repeat cloning steps carefully Confirm transmitter is the 4-button version Ensure you have access to the receiver/opener for programming |
명세서
- 모델: 미토 쿨 C4
- 상표: 비피에이치피(BFT)
- 채널 수: 4
- 주파수 범위: 433MHz
- 배터리 유형: 1 x LR44(포함)
- 제품 크기: 5 x 3 x 4cm
- 무게: 20g
- 특별 기능: Weather-resistant, noise reduction (as per product listing)
- 제조업체: 비피에이치피(BFT)
- 첫 이용 가능 날짜: 17년 2024월 XNUMX일
적합성 선언
The BFT MITTO COOL C4 transmitter complies with relevant European directives for radio equipment and safety. Copies of the Declaration of Conformity are available for reference.
Figure 3: Page 1 of the Declaration of Conformity, showing compliance statements in multiple languages, including English.
Figure 4: Page 2 of the Declaration of Conformity, providing further details and signatures, including English section.
보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized BFT dealer or the manufacturer directly. Extended warranty options may be available from third-party providers.
