vLinker FS USB OBD2 어댑터 사용 설명서

1. 소개 및 이상view

The vLinker FS USB OBD2 Adapter is a professional-grade diagnostic tool designed for automotive enthusiasts and professionals. It specializes in working with FORScan software and provides advanced diagnostic and programming capabilities for various vehicle makes, particularly Ford, Lincoln, Mazda, and Mercury vehicles.

This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your vLinker FS USB adapter to ensure optimal performance and safe usage.

2. 제품 특징

• FORScan Optimization: Specifically designed and recommended by the FORScan Team for reliable connection and high-speed data transfer.
• 빠르고 안정적인 연결: Achieves 3Mpbs transmission rate and 3Mhz baud rate via USB 2.0/3.0, ensuring smooth data flow without dropped packets or corruption.
• 자동 전자 스위칭: Seamlessly switches between HS-CAN, MS-CAN, and Ford Car networks, allowing simultaneous access to all CAN buses.
• FEPS 18V Programming Voltage 출력: Supports advanced programming functions within FORScan.
• Battery Saver and Protection: Features auto sleep/wake-up mode, over-voltage, over-current, over-temperature, and battery drain protection, allowing the device to remain plugged in safely.
• 폭넓은 차량 호환성: Supports all 12V/24V OBD2 standard compliant cars (99% of models after 2000, 92% after 1996 in USA; 12V gasoline after 2000, 12V diesel after 2004 in EU).
• OBD2의 모든 기능: Capable of reading/clearing fault codes, accessing live data, I/M readiness, on-board monitor tests, O2 sensor tests, vehicle information, component tests, and freeze frame data.
• Support for Third-Party Apps: Compatible with FORScan, ELMconfig, ELM FF2, FoCCCus, and other OBD2 applications (apps not included).

Figure 2.1: The vLinker FS USB OBD2 Adapter with its integrated USB cable.

Figure 2.2: Diagram illustrating the automatic electronic switching capability between HS-CAN and MS-CAN, along with hacker-proof, battery saver, and overvoltag보호 기능.

3. 사양

4. 설정 및 설치

4.1 패키지 내용

진행하기 전에 패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x vLinker FS USB Adapter
• 1 x 사용자 매뉴얼(이 문서)
• 1 x 포장 상자

4.2 드라이버 및 소프트웨어 설치

1. Download FTDI USB Driver: Navigate to the official FTDI web사이트 (www.ftdichip.com). Go to the "DRIVERS" section and select "VCP Drivers". Download the appropriate USB driver for your Windows operating system.
2. USB 드라이버 설치: Follow the on-screen instructions to install the downloaded FTDI USB driver.
3. Download Diagnostic Application: Download your preferred OBD2 diagnostic application (e.g., FORScan, ELMconfig, ELM FF2, FoCCCus) compatible with Windows. These applications are not included with the vLinker FS USB adapter and may require separate purchase or download.

Figure 4.1: Steps for downloading the FTDI driver and a compatible diagnostic application.

4.3 Connecting the Adapter to Your Vehicle and Computer

1. OBD2 포트를 찾으십시오: Identify the OBD2 diagnostic port in your vehicle. This port is typically located under the dashboard on the driver's side.
2. 어댑터를 차량에 연결하세요: Firmly plug the vLinker FS USB adapter into your vehicle's OBD2 port.
3. 어댑터를 컴퓨터에 연결하세요: Plug the USB end of the vLinker FS USB adapter into an available USB port on your Windows PC.
4. 시동을 켜세요: Turn your vehicle's ignition to the "ON" position (engine does not need to be running for most diagnostic functions).

Figure 4.2: Illustration of connecting the vLinker FS USB adapter to the vehicle's OBD2 port and a computer, followed by turning the ignition on.

5. 사용 설명서

5.1 기본 진단 기능

Once the vLinker FS USB adapter is connected and recognized by your computer and diagnostic software, you can perform various functions:

• 코드 읽기: Retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's Engine Control Unit (ECU).
• 코드 지우기: Clear DTCs from the ECU. Note that clearing codes does not fix the underlying issue.
• 데이터 스트림 : View real-time sensor data and parameters from the vehicle.
• I/M 준비: 차량이 배출가스 검사를 받을 준비가 되었는지 확인하려면 배출가스 관련 모니터의 상태를 점검하십시오.
• 온보드 모니터 테스트: 특정 구성 요소/시스템에 대한 온보드 진단 모니터링 테스트 결과를 확인할 수 있습니다.
• O2 센서 테스트 : 산소 센서 모니터링 테스트 결과를 조회합니다.
• 차량 정보: Display vehicle information such as VIN (Vehicle Identification Number), CID (Calibration ID), and CVN (Calibration Verification Number).
• 구성 요소 테스트: Perform specific tests on vehicle components as supported by your diagnostic software.
• 정지 화면: View 오류 코드가 설정된 순간의 차량 운행 조건에 대한 스냅샷입니다.

그림 5.1: 이상view of the full OBD2 functions supported by the vLinker FS USB adapter.

5.2 Advanced Functions (FORScan Specific)

For users utilizing FORScan, the vLinker FS USB adapter unlocks advanced capabilities:

• 모듈 구성 및 프로그래밍: Modify vehicle settings and program new modules.
• Hidden Function Activation: Enable or disable various vehicle features (e.g., global window open/close, secure idle, turn signal flash count, disabled door ajar chime, reverse tilt mirrors, Bambi mod, tire size correction, heated steering wheel, disabled double horn honk, perpendicular park assist).
• Access to All CAN Buses: Simultaneously access HS-CAN, MS-CAN, and Ford Car networks without manual switching.

그림 5.2: 예ample of FORScan hidden function activation using the vLinker FS USB adapter.

6. 유지관리

6.1 펌웨어 업데이트

To ensure optimal performance and access to the latest features, it is recommended to keep the vLinker FS USB firmware updated. Firmware updates are free for the lifetime of the product.

1. 어댑터 연결: Connect the vLinker FS USB adapter to your computer via USB.
2. COM 포트를 확인하십시오. Open your computer's Device Manager and identify the COM port assigned to the vLinker FS USB.
3. Launch Update Tool: Use the official vLinker firmware update tool (downloadable from the official web대지).
4. Select COM Port and Baud Rate: In the update tool, select the identified COM port and set the default baud rate (e.g., 115200).
5. Browse and Select Firmware File: 최신 펌웨어를 다운로드하세요 file from the official vLinker website. In the update tool, browse and select this firmware file.
6. 업데이트 시작: Click the "Update" button to begin the firmware update process. During the update, the Blue (BT) light and Orange (Host) light on the adapter will remain on.
7. 완성: Once the update is complete, the Red (OBD) light and Orange (Host) light will turn off. Power cycle the device (unplug and replug) for changes to take effect.

중요한: If the update is interrupted or fails, unplug and replug the device, then re-attempt the update with the latest firmware from the official website. Pirated products cannot be updated.

Figure 6.1: Step-by-step guide for updating the vLinker FS USB firmware.

6.2 청소 및 보관

• 어댑터를 깨끗하게 유지하고 먼지와 이물질이 묻지 않도록 하십시오. 부드럽고 마른 천으로 닦아주세요.
• 어댑터는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
• Avoid exposing the device to moisture or corrosive substances.

7. 문제 해결

7.1 일반적인 문제 및 해결 방법

Issue: Product does not light up after firmware update.

원인: The update process was interrupted or failed.

치료: Unplug and replug the device. Download the latest firmware from the official website and re-attempt the update.

Issue: "USB not recognized" error message on computer.

원인: Some laptop models with USB 3.0 controllers may not be fully compatible, or the driver is not correctly installed.

치료:

• Connect the vLinker FS USB to a different USB port on your computer.
• Connect the vLinker FS USB via a USB 2.0 hub.
• Manually install the FTDI USB driver: Go to the official FTDI web사이트 (www.ftdichip.com), select "DRIVERS", click "VCP Drivers", and download the appropriate USB driver.

Issue: Adapter not connecting to vehicle or software.

원인: Incorrect connection, ignition not on, or software configuration issues.

치료:

• Ensure the adapter is firmly plugged into the vehicle's OBD2 port and the computer's USB port.
• 차량의 시동 스위치가 "ON" 위치에 있는지 확인하십시오.
• Check your diagnostic software settings to ensure the correct COM port is selected for the vLinker FS USB.
• Confirm that the necessary drivers are installed correctly (refer to Section 4.2).

8. 보증 및 지원

The vLinker FS USB car diagnostic scanner comes with a 1년 보증 구매일로부터.

vLinker provides lifetime Firmware FREE updates to ensure your device remains up-to-date with the latest features and improvements.

For any technical assistance, troubleshooting, or inquiries, vLinker offers round-the-clock tech support. Should you encounter any issues, including failure to connect the device or other operational problems, please contact the vLinker support team. They are available to provide fast responses and technical assistance.

You can typically find contact information for support on the official vLinker web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.