ZEBRONICS ROBUST 게이밍 섀시 사용 설명서

1. 서론

This manual provides detailed instructions for the installation, operation, and maintenance of your ZEBRONICS ROBUST Premium Gaming Chassis. Please read this manual thoroughly before beginning assembly to ensure proper setup and optimal performance. Keep this manual for future reference.

이미지 1.1: 앞면 view of the ZEBRONICS ROBUST Gaming Chassis, showcasing its tempered glass panels and illuminated interior fans.

2. 제품 특징

The ZEBRONICS ROBUST chassis is designed to provide a robust and aesthetically pleasing enclosure for your gaming PC components. Key features include:

• Glass-Finish Outlook: Front and side panels are constructed from tempered glass, offering a clear view of internal components and enhancing the chassis's visual appeal.
• 마더보드 호환성: Supports mATX (Micro-ATX) and Mini ITX motherboard form factors.
• 효율적인 환기: Equipped with three pre-installed 120mm multicolor LED ring fans (two at the top, one at the rear) to ensure effective cooling and airflow.

Image 2.1: Illustration highlighting the three pre-installed 120mm multicolor LED ring fans for cooling.

• 다중 연결성: Front panel includes one USB 3.0 port, two USB 2.0 ports, and separate microphone and headphone jacks for convenient peripheral access.
• 확장 슬롯: Features four expansion slots at the rear for installing add-on cards such as graphics cards or sound cards.
• Component Accommodation: Supports VGA cards up to 255mm in length and CPU coolers up to 165mm in height. The power supply unit (PSU) is designed for bottom installation.

이미지 2.2: 상세 view of the front panel I/O, showing the power button, RGB LED control switch, LED indicators, audio ports, and USB ports.

Image 2.3: Internal layout indicating the bottom-mounted power supply unit area and the four expansion slots for add-on cards.

• Optimized Cooling Design: Engineered for superior airflow to maintain optimal temperatures during extended use.

Image 2.4: Visual representation of the chassis's internal airflow path, designed for efficient heat dissipation.

• 먼지 필터링: Includes a magnetic dust filter at the top and a detachable dust filter at the bottom to prevent dust accumulation.
• 케이블 관리 : Designed with features to facilitate effective cable organization, reducing clutter and improving airflow.

Image 2.5: Close-up of the top magnetic dust filter, demonstrating its easy removal for cleaning.

3. 사양

4. 설정 가이드

Follow these steps to assemble your computer components within the ZEBRONICS ROBUST chassis.

4.1. Unpacking and Panel Removal

1. 케이스를 포장에서 조심스럽게 꺼내세요.
2. 섀시를 안정적이고 평평한 표면에 놓으세요.
3. Locate the thumbscrews on the rear of the chassis securing the tempered glass side panel. Unscrew them and carefully remove the side panel. Set it aside in a safe place to prevent damage.
4. Repeat for the other side panel if necessary for easier access.

4.2. 마더보드 설치

Image 4.1: Chassis interior indicating support for mATX and Mini ITX motherboard sizes.

1. Install the I/O shield that came with your motherboard into the corresponding opening at the rear of the chassis.
2. Align your mATX or Mini ITX motherboard with the pre-installed standoffs inside the chassis.
3. 적절한 나사를 사용하여 마더보드를 고정하십시오. 너무 세게 조이지 마십시오.

4.3. 전원 공급 장치(PSU) 설치

1. Position your PSU in the designated bottom compartment of the chassis.
2. Ensure the PSU fan is facing downwards (if the chassis has a bottom vent) or upwards, depending on your cooling preference and chassis design.
3. Secure the PSU to the chassis using the screws provided with your PSU.

4.4. 저장 드라이브 설치

The chassis typically includes bays for 2.5-inch SSDs and 3.5-inch HDDs. Refer to your chassis's internal layout for specific mounting points.

1. Locate the drive bays or mounting brackets.
2. Install your SSDs or HDDs into the appropriate bays/brackets and secure them with screws.

4.5. Graphics Card (VGA) and Expansion Card Installation

1. 섀시 후면에서 필요한 확장 슬롯 덮개를 제거하십시오.
2. Insert your graphics card or other expansion cards into the corresponding PCIe slots on your motherboard.
3. Secure the cards with screws to the chassis.

4.6. 전면 패널 케이블 연결

Connect the front panel cables (USB, audio, power switch, reset switch, LED indicators) from the chassis to the corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

4.7. 케이블 관리

메인보드 트레이 뒤쪽의 케이블 정리용 홈과 고정 지점을 활용하여 케이블을 정리하고 고정하세요. 이렇게 하면 공기 흐름이 개선되고 미관도 향상됩니다.

4.8. Reattaching Panels

Once all components are installed and cables are managed, carefully reattach the side panels and secure them with the thumbscrews.

5. 사용 설명서

5.1. 전원 켜기 / 끄기

1. 모든 외부 주변기기(모니터, 키보드, 마우스)가 연결되어 있는지 확인하십시오.
2. 전원 케이블을 파워서플라이와 벽면 콘센트에 연결하세요.
3. Press the power button on the front panel of the chassis to turn on your computer.
4. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds.

5.2. LED Fan Control

The chassis features an RGB LED Control switch on the front panel. Press this button to cycle through various lighting modes and colors for the pre-installed LED fans.

6. 유지관리

정기적인 유지보수는 섀시와 구성 요소의 수명 연장 및 최적의 성능을 보장하는 데 도움이 됩니다.

6.1. 먼지 필터 청소

1. Periodically remove the top magnetic dust filter and the bottom detachable dust filter.
2. 압축 공기, 부드러운 브러시 또는 물로 헹궈 필터를 청소하십시오(재설치하기 전에 완전히 건조되었는지 확인하십시오).
3. Reattach the dust filters.

6.2. 일반 청소

• Use a soft, dry cloth to wipe down the exterior surfaces of the chassis, including the tempered glass panels.
• For stubborn smudges on glass, a mild glass cleaner applied to a cloth (not directly to the glass) can be used.
• 연마성 세척제나 용제는 마감재를 손상시킬 수 있으므로 사용하지 마십시오.

7. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

7.1. 힘이 없다

• 전원 케이블이 파워서플라이와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
• Check that the power switch on the PSU itself is in the 'ON' position.
• 전면 패널 전원 스위치 케이블이 마더보드 헤더에 올바르게 연결되어 있는지 확인하세요.

7.2. Fans Not Spinning / LEDs Not Working

• Check that the fan power cables are securely connected to the motherboard or a fan controller.
• Ensure the RGB LED control cable (if separate from fan power) is properly connected.
• Press the RGB LED Control switch on the front panel to cycle through modes or turn on the LEDs.

7.3. 전면 패널 USB/오디오 포트가 작동하지 않음

• Verify that the USB and audio cables from the front panel are correctly connected to their respective headers on the motherboard.
• Check your operating system's device manager and audio settings to ensure drivers are installed and devices are enabled.

8. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official ZEBRONICS web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

For further assistance, you may contact ZEBRONICS customer support through their official channels.