OLIXIS I2U8R

OLIXIS Criss Cross Legged Chair Instruction Manual

Model: I2U8R

1. 서론

Thank you for choosing the OLIXIS Criss Cross Legged Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.

This armless chair features a spacious, wide seat designed for comfort, allowing for various sitting positions, including cross-legged. It is height-adjustable and includes a swivel and rocking function, making it suitable for home offices, bedrooms, study rooms, and vanity areas.

2. 안전 정보

  • Always follow assembly instructions carefully to ensure proper setup and stability.
  • This chair is designed for adult use and supports a maximum weight of 300 pounds (136 kg). Do not exceed this weight limit.
  • Use the chair on a hard, flat floor surface to prevent tipping or instability.
  • 질식 위험을 방지하기 위해 작은 부품과 포장재를 어린이의 손이 닿지 않는 곳에 보관하세요.
  • 모든 볼트와 나사가 단단히 조여져 있는지 정기적으로 점검하세요. 필요에 따라 다시 조이세요.

3. 제품 구성품

Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

Diagram showing all components of the OLIXIS Criss Cross Legged Chair, including the seat, backrest, gas lift, base, and hardware.

그림 1: 폭발했다 view of the chair components, illustrating the seat, backrest, gas lift, star base, and various screws and tools required for assembly.

구성 요소 목록:

  • 좌석 쿠션
  • 등받이
  • 가스 리프트 실린더
  • Star Base (No Wheels)
  • 조립 하드웨어(나사, 와셔, 육각 렌치)

4. 조립 설명서

Assembly of the OLIXIS Criss Cross Legged Chair is straightforward. Please follow these steps carefully:

  1. Attach the Backrest to the Seat: Align the backrest with the seat cushion and secure it using the provided screws and Allen wrench. Ensure a snug fit.
  2. 가스 리프트를 삽입하세요: 가스 리프트 실린더를 스타베이스의 중앙 구멍에 놓습니다.
  3. Attach the Seat Assembly to the Gas Lift: Carefully place the assembled seat and backrest onto the top of the gas lift cylinder. Press down firmly to secure.
  4. 안정성 확인: Once assembled, sit on the chair to ensure all connections are secure and the chair is stable.

For visual guidance, an installation video is available on the product page.

5. 사용 설명서

Your OLIXIS Criss Cross Legged Chair offers several adjustable features for personalized comfort:

5.1. 높이 조절

To adjust the seat height, locate the lever under the seat on the right side. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. Release the lever at your desired height.

5.2. 회전 기능

이 의자는 360도 회전 기능을 갖추고 있어 받침대를 움직이지 않고도 쉽게 회전할 수 있도록 설계되었습니다.

5.3. Rocking Function

The chair features a rocking mechanism for added comfort during leisure time. To activate the rocking function, pull out the rotating base button located under the seat. Push the button back in to lock the chair in an upright position.

Diagram illustrating the rocking function of the chair, showing a 21-degree tilt, the tilt rock lever, rocking function knob, and 3.75-inch height adjustable mechanism.

그림 2: Visual guide to the chair's rocking and height adjustment features.

6. 유지관리 및 관리

To ensure the longevity and appearance of your OLIXIS Criss Cross Legged Chair, follow these maintenance guidelines:

  • 청소: For fabric chairs, spot clean with a mild detergent and a damp cloth. For PU leather chairs, wipe with a soft, damp 천으로 닦으세요. 강한 화학 물질이나 연마성 세제는 피하세요.
  • 점검: Periodically inspect all moving parts and fasteners. Tighten any loose screws or bolts.
  • 직사광선을 피하세요: Prolonged exposure to direct sunlight can cause fading or damage to the upholstery.
  • 무게 분포 : Distribute your weight evenly on the seat to prevent undue stress on the chair's components.

7. 문제 해결

의자 사용 중 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.

  • 의자가 흔들거려요: Ensure all assembly screws are tightened. Check that the gas lift is properly seated in the base.
  • 높이 조절이 작동하지 않음: Verify that the gas lift lever is fully engaged or disengaged as required. Ensure no obstructions are preventing movement.
  • Rocking Function Not Engaging/Disengaging: Check the rotating base button under the seat. Ensure it is pulled out to enable rocking or pushed in to lock.

If these steps do not resolve the issue, please contact OLIXIS customer support for further assistance.

8. 사양

특징사양
상표올릭시스
모델명Criss Cross Legged Chairs
모델 번호I2U8R
색상해군
재료Metal (Frame), Foam (Seat/Fill)
제품 크기(D x W x H)26인치 깊이 x 26인치 너비 x 35인치 높이
좌석 깊이18.7인치
의자 등받이 폭25.2 인치
품목 무게27 파운드
최대 중량 권장 사항300 파운드
높이 조절 가능15.94인치에서 19.69인치
가구베이스 이동받침
기울이기Yes (Rocking Function)
팔 스타일무방비의
필요한 조립
표면 추천단단한 바닥

9. 보증 및 지원

OLIXIS is committed to providing high-quality products. For any questions regarding your OLIXIS Criss Cross Legged Chair, including assembly, operation, or parts, please feel free to contact us. Our customer support team is ready to assist you.

구체적인 보증 내용은 구매 서류를 참조하십시오.

관련 문서 - I2U8R

사전view 전동 스탠딩 데스크 사용 설명서 - ELT-P5524, ELT-P6324
OLIXIS 전동식 스탠딩 데스크(모델 ELT-P5524, ELT-P6324)에 대한 포괄적인 사용 설명서로, 조립 단계, 컨트롤러 기능, 설정 및 문제 해결 방법을 자세히 설명합니다.
사전view OLIXIS C-5025 인체공학적 사무용 의자 조립 및 사용 설명서
OLIXIS C-5025 인체공학적 사무용 의자를 조립하고 안전하게 사용하기 위한 종합 안내서입니다. 포장 내용물, 자세한 단계별 조립 설명서, 그리고 중요 사용 주의사항이 포함되어 있습니다.
사전view OLIXIS 사무용 책상 의자 모델 C-2639 조립 설명서
OLIXIS 사무용 책상 의자 모델 C-2639를 조립하는 데 필요한 포괄적인 가이드로, 부품 목록과 올바른 조립 및 사용을 위한 단계별 지침이 포함되어 있습니다.
사전view 전동 스탠딩 데스크 사용 설명서 ELT-P4824
ELT-P4824 전동식 스탠딩 데스크의 사용 설명서로, 조립, 사용 방법, 문제 해결 방법을 자세히 설명합니다.
사전view OLIXIS C-6109 사무용 의자 조립 설명서
OLIXIS C-6109 사무용 의자 조립 가이드입니다. 자세한 부품 목록, 단계별 지침, 그리고 간편한 설치를 위한 중요 안전 경고가 포함되어 있습니다.
사전view OLIXIS 7 CHDG-2130 서랍 수납장 - 조립 설명서
OLIXIS 7 CHDG-2130 서랍 수납장 조립을 위한 종합 사용 설명서입니다. 부품 목록, 단계별 조립 가이드, 그리고 안전한 설치를 위한 안전 정보가 포함되어 있습니다.