1. 서론
This manual provides essential information for the proper setup, operation, and maintenance of your TIDRADIO Speaker Microphone (Model TID-MIC). This accessory is designed to enhance communication convenience for users of compatible Ham, GMRS, and FRS radios.
The speaker microphone features a handheld design, allowing for easy communication without needing to remove your radio from its belt clip or pocket. It incorporates a high-performance micro speaker and a noise-cancellation microphone to ensure clear audio transmission and reception, even in noisy environments. A rotatable clip on the back provides flexible attachment options.
Figure 1: Two TIDRADIO Speaker Microphones
2. 설정
To connect your TIDRADIO Speaker Microphone to your compatible radio, follow these steps:
- Locate the 2-pin accessory port on the side of your radio. This port typically consists of two jacks: a 3.5mm stereo jack (top pin) for the earphone and a 2.5mm stereo jack (bottom pin) for the microphone.
- Align the twin right-angle 2-pin connector of the speaker microphone with the corresponding ports on your radio.
- Gently but firmly insert the connector into the radio's port until it is fully seated. Ensure a secure connection to prevent audio interruptions.
Figure 2: Speaker Microphone 2-Pin Connector
설치 데모 비디오
Video 1: This video demonstrates the connection of a similar speaker microphone to a radio, highlighting the 2-pin interface and the secure clip. It also shows the PTT button and volume adjustment.
3. 사용 설명서
Once connected, the TIDRADIO Speaker Microphone allows for convenient hands-free communication:
- 푸시투토크(PTT) 버튼: To transmit, press and hold the large PTT button located on the side of the microphone. Speak clearly into the microphone grille. Release the button to listen.
- 스피커 기능: Audio from your radio will be routed through the speaker on the microphone. The volume is typically controlled directly from your radio's volume knob.
- 회전식 클립: The sturdy, rotatable clip on the back of the microphone allows you to securely attach it to your collar, shoulder, or other convenient locations for easy access and optimal sound pickup.
Figure 3: Push-to-Talk (PTT) Button
Figure 4: Rotatable Clip
작동 시연 영상
Video 2: This video illustrates the features of a similar speaker microphone, including the PTT button, coiled cable, and 360-degree rotatable clip, demonstrating its practical use.
4. 유지관리
- 청소: 마이크 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 강한 화학 약품이나 연마성 재료는 사용하지 마십시오.
- 저장: 사용하지 않을 때는 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 마이크를 보관하세요.
- 방수 기능: This speaker microphone is 방수 기능이 없습니다.손상을 방지하기 위해 물, 비 또는 과도한 습기에 노출되지 않도록 하십시오.
- 케이블 관리: Avoid excessive pulling or bending of the coiled cable to prevent internal wire damage.
5. 문제 해결
- No Audio from Speaker Microphone:
- 2핀 커넥터가 라디오 포트에 완전히 그리고 단단히 삽입되었는지 확인하십시오.
- 라디오 볼륨을 확인하세요.
- 라디오의 전원이 켜져 있고 제대로 작동하는지 확인하세요.
- 마이크가 전송되지 않음:
- 송신 중 PTT 버튼이 확실히 눌려 있는지 확인하십시오.
- Check the radio's settings to ensure the external microphone is enabled, if applicable.
- Ensure the 2-pin connector is fully and securely inserted.
- 왜곡된 오디오:
- Check the connection for any loose pins or debris.
- Adjust the radio's volume to an appropriate level.
- Ensure you are speaking clearly into the microphone and not too close or too far away.
6. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | TID-MIC |
| 커넥터 유형 | Twin right angle (K-type): Ear 3.5mm stereo (top pin), Mic 2.5mm stereo (bottom pin) |
| 케이블 길이 | 3 feet (914 mm) |
| 색상 | 검은색 |
| 품목 무게 | 6.5 온스 |
| 방수 레벨 | 방수가 되지 않음 |
| 호환 장치 | BAOFENG (UV-5R mini, 5RM, 5RX, UV-21R, UV-5G Plus, GM-5RH, UV-K5, UV-17R, BF-888S, BF-F8HP pro, GM-15 PRO, UV-S9 Plus, UV-82, UV-82HP, K5 Plus, DM32, UV32), TIDRADIO (TD-V2, TD-H8, TD-H3 Plus), and all Kenwood Interface walkie talkies. |
7. 보증 및 지원
For warranty information or technical support, please contact TIDRADIO Direct, the seller of this product. Retain your purchase receipt for any warranty claims.
Manufacturer: TIDRADIO





