1. 제품 오버view
The KINGrinder K6 is a high-quality manual coffee grinder designed for precision and consistency across various brewing methods. It features durable construction and an intuitive grind adjustment system.
Figure 1: KINGrinder K6 Manual Coffee Grinder with packaging and burr.
Figure 2: Dimensions of the KINGrinder K6. Height: 17.5cm, Handle length: 16cm, Diameter: 5.5cm.
2. 주요 특징
- 정밀 연삭 조정: 16 µm (microns) per click, with 60 clicks per full revolution for fine-tuning.
- 내구성 있는 구조: Aluminum body with stainless steel conical burrs.
- 효율적인 분쇄: 48mm burrs designed for quick and consistent grinding.
- 휴대성 있는 디자인: Ideal for both home and travel, with a 30g-35g hopper capacity.
- 청소하기 쉬움: Can be dismantled by hand and includes a cleaning brush.
- 인체공학적 그립: Features a non-budging band for secure handling during grinding.
3. 설치 및 조립
The KINGrinder K6 comes pre-assembled. Before first use, ensure all components are clean and free of debris.
3.1개의 구성요소
- Grinder Body with Burr Assembly
- Straight Handle
- 뚜껑
- Cleaning Brush (included)
Figure 3: Disassembled components of the KINGrinder K6.
3.2 손잡이 부착
Align the handle with the top shaft of the grinder and push it down firmly until it is securely in place. The handle is designed to be easily removable for portability.
3.3 연삭 조정
The grind size is adjusted using the dial located at the top of the grinder. Turn the dial clockwise for finer grinds and counter-clockwise for coarser grinds. Each click represents a 16-micron change in grind size. There are 60 clicks in one full revolution.
Figure 4: Top adjustment dial for grind size control.
4. 사용 설명서
4.1 커피 원두 적재
Remove the lid and pour your desired amount of whole coffee beans into the hopper. The hopper capacity is 30g-35g. Replace the lid securely.
4.2 분쇄 공정
Hold the grinder firmly with one hand, utilizing the non-budging band for a secure grip. With the other hand, turn the handle clockwise to begin grinding. Continue until all beans have been ground.
4.3 Recommended Grind Settings
The following table provides general recommendations for grind settings based on common brewing methods. Adjustments may be necessary based on personal preference and specific coffee beans.
Figure 5: Recommended grind settings for different brewing methods. One full revolution equals 60 clicks.
| 양조 방법 | Clicks (Approx.) | 갈기 크기 |
|---|---|---|
| 터키 커피 | 20 | 엑스트라 파인 |
| 에스프레소 커피 | 40 | 괜찮은 |
| 모카포트/에어로프레스 | 60 | 중간-미세 |
| 푸어오버 / 사이펀 | 100 | 중간 |
| 프렌치 프레스 | 120 | 조잡한 |
Note: One round of adjustment is equivalent to 60 clicks. These settings are for reference only; adjustments may be made according to personal preference.
Figure 6: The KINGrinder K6 supports various brewing methods from Turkish to French Press.
5. 유지관리 및 청소
Proper maintenance ensures the longevity and performance of your KINGrinder K6.
- 물로 씻지 마세요: The grinder should ~ 아니다 be cleaned with water. Water can damage the burrs and internal mechanisms.
- Use Included Brush: Use the provided cleaning brush to remove coffee grounds from the burrs and internal components.
- 정기 청소: Clean the grinder regularly, especially after each use, to prevent oil buildup and maintain grind consistency.
Figure 7: Important care instruction: Do not clean with water.
6. 문제 해결
6.1 Grinding Difficulty or Inconsistency
- Check Grind Setting: Ensure the grind setting is appropriate for your beans and brewing method. A setting that is too fine can make grinding difficult.
- 깨끗한 버: Accumulated coffee oils and fines can affect performance. Clean the burrs thoroughly with the provided brush.
- 콩 품질: Ensure you are using fresh, good quality coffee beans.
6.2 Power Tool Use
While the KINGrinder K6 is designed to be compatible with power tools for grinding, it is generally not recommended for optimal performance or grind consistency. Manual grinding allows for better control over the grinding speed and torque, which is crucial for achieving a uniform grind, especially for espresso. Using a power tool too fast can cause beans to spring up in the hopper, and too slow may not provide sufficient torque for efficient grinding.
7. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 킹그라인더 |
| 모델 번호 | K6-직선형 손잡이 |
| 색상 | 아이언 그레이 |
| 재료 | 알루미늄, 스테인리스 스틸 |
| 버 타입 | 48mm Conical Burr (Stainless Steel, Uncoated) |
| 분쇄도 조절 | 16 µm per click (60 clicks/revolution) |
| 호퍼 용량 | 30g-35g |
| 품목 무게 | 1.6 파운드 |
| 제품 치수 | 2.17인치 길이 x 2.05인치 너비 x 6.69인치 높이 |
| 포함된 구성 요소 | Lid, Straight Handle, Cleaning Brush |
| 관리 지침 | Do not clean with water, Includes a cleaning brush |
8. 보증 및 지원
For detailed warranty information and customer support, please refer to the official KINGrinder web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
