소개
This manual provides comprehensive instructions for the SPYMINNPOO Electric Scooter 1T5 Integrated Wiring Harness. It covers product features, installation guidelines, operational details, maintenance tips, and technical specifications. Please read this manual thoroughly before installation and use to ensure proper function and safety.
안전 정보
- Always disconnect the scooter's power source before installing or replacing any electrical components.
- 모든 연결 부분이 안전하고 적절하게 절연되어 단락을 방지하세요.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 기술자에게 문의하십시오.
- Keep the wiring harness away from sharp objects or excessive heat sources.
- Do not attempt to modify the wiring harness, as this may void the warranty and compromise safety.
제품 끝view
The SPYMINNPOO Electric Scooter 1T5 Integrated Wiring Harness is designed for electric scooter motor drive wheel wiring harness repair and replacement. It features copper core wires for durability and waterproof connectors for reliable performance in various weather conditions.
Image: The SPYMINNPOO Electric Scooter 1T5 Integrated Wiring Harness, showing its main cable and multiple connectors.
구성요소 기능 설명
이미지: 자세한 view of the wiring harness connectors with their corresponding functions and pin configurations.
- Left and Right Brake Lever: 2 x Red Female 2 Pin connectors.
- 촉진 신경: Yellow Female 3 Pin connector.
- Panel (Instrument): Purple Female 7 Pin connector.
- 통합 스위치: Green Female 5 Pin connector.
설치
The wiring harness is designed for straightforward installation and replacement. Follow these general steps:
- 스쿠터를 준비하세요: Ensure the electric scooter is powered off and the battery is disconnected before beginning any wiring work.
- 연결 식별: Refer to the "Component Function Description" above and the existing wiring on your scooter to identify the corresponding connection points for the brake levers, accelerator, control panel, and integrated switch.
- 하네스를 연결하세요: Carefully plug each connector from the new 1T5 wiring harness into its designated port on the scooter's components. Ensure a firm and secure connection for each plug.
- 안전한 배선: Route the cables neatly and secure them using cable ties or clips to prevent them from interfering with moving parts or getting damaged.
- 테스트 기능: Once all connections are made, reconnect the scooter's battery and power it on. Test the functionality of the brakes, accelerator, panel, and switch to ensure everything is working correctly before riding.
Image: Close-up of the waterproof connectors, highlighting their robust design for all-weather performance.
The harness includes additional terminal connectors for specific applications or repairs, as shown below.
Image: The integrated wiring harness displayed alongside three additional terminal connectors.
작업
The SPYMINNPOO 1T5 Integrated Wiring Harness facilitates the electrical connections between various control components of your electric scooter. Once correctly installed, it enables the proper functioning of the brake levers, accelerator, control panel, and integrated switch, allowing for seamless operation of the scooter's motor drive system.
유지
- Periodically inspect the wiring harness for any signs of wear, fraying, or damage.
- Ensure all connectors remain securely plugged in. Loose connections can lead to intermittent functionality.
- Keep the harness clean and free from dirt, dust, and moisture. Wipe with a dry cloth if necessary.
- Avoid exposing the harness to extreme temperatures or harsh chemicals.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Scooter not powering on or intermittent power. | Loose connection, damaged wire, or incorrect installation. | Check all harness connections for tightness. Inspect wires for visible damage. Re-verify installation steps. |
| Brakes, accelerator, or panel not responding. | Specific connector loose or incorrectly plugged in. | Ensure the corresponding 2-pin (brakes), 3-pin (accelerator), or 7-pin (panel) connector is securely attached. |
| Water ingress or corrosion on connectors. | Improper sealing or extreme exposure. | While the connectors are waterproof, ensure they are fully seated. Clean any corrosion carefully and ensure proper drying. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 품목 유형 | Electric Scooter 1T5 Cable |
| 재료 | Copper Core Wire |
| 무게(대략) | 110g / 3.9온스 |
| 모델 번호 | SPYMINNPOOmx5s97p04d |
| 커넥터 유형 | 2-Pin (Brake), 3-Pin (Accelerator), 7-Pin (Panel), 5-Pin (Switch) |
| 케이블 유형 | Integrated Wiring Harness |
| 호환 장치 | 전기 스쿠터 |
| 특징 | 방수 커넥터 |
보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact SPYMINNPOO customer service through your retailer. Keep your purchase receipt for warranty claims.