Henhaoro KDC-BAT180 Battery User Manual

1. 서론

This manual provides essential instructions for the safe and effective use of your Henhaoro KDC-BAT180 Li-ion battery. This battery is specifically designed for compatibility with KOAMTAC KDC-250 and KDC-300 barcode scanners. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety.

2. 안전 정보

고객님의 안전이 최우선입니다. 다음 경고 및 예방 조치를 준수해 주시기 바랍니다.

• 하지 마세요 배터리 팩을 분해, 열거나 수리하려고 시도하지 마십시오.
• REPLACE ONLY with the battery pack designated for this product (KDC-BAT180).
• 하지 마세요 압착, 찔러 넣기, 외부 접촉으로 인한 단락을 일으키지 않도록 하며, 불이나 물에 폐기하지 마십시오.
• 하지 마세요 60°C(140°F) 이상에서 보관하십시오.
• The limited charge voltage for this battery is 4.2V ± 0.05V. Use only compatible chargers.
• 배터리를 어린이의 손이 닿지 않는 곳에 보관하세요.
• 사용한 배터리는 현지 규정에 따라 폐기하십시오.

Image 2.1: Close-up of the KDC-BAT180 battery label showing model number, specifications, and safety warnings.

3. 제품 오버view

The Henhaoro KDC-BAT180 is a high-quality Li-ion replacement battery designed to power your KOAMTAC KDC-250 and KDC-300 barcode scanners. It features robust safety mechanisms and reliable performance.

주요 특징:

• 기억효과가 없습니다.
• Protection against over-charge, over-discharge, over-heat, over-current, and short-circuit.
• Certified with ROSH, CE, and UL standards.

Image 3.1: The Henhaoro KDC-BAT180 Li-ion battery.

4. 설정 및 설치

Follow these steps to correctly install the KDC-BAT180 battery into your KOAMTAC KDC-250 or KDC-300 barcode scanner:

1. Ensure your barcode scanner is powered off before attempting battery installation or removal.
2. Locate the battery compartment on your KOAMTAC KDC-250 or KDC-300 device. Refer to your scanner's original manual for specific instructions on opening the compartment.
3. Carefully align the KDC-BAT180 battery with the battery compartment's contacts. The battery is designed to fit in one specific orientation.
4. Gently push the battery into place until it is securely seated. Do not force the battery.
5. 배터리 덮개를 단단히 닫으세요.

중요한: Verify that the battery model (KDC-BAT180) and your device model (KDC-250/KDC-300) are compatible before installation.

이미지 4.1: 각도 view of the KDC-BAT180 battery, indicating the correct insertion direction.

5. 사용 설명서

배터리 충전:

The KDC-BAT180 is a rechargeable Li-ion battery. To charge, insert the battery into your KOAMTAC KDC-250 or KDC-300 scanner and connect the scanner to its designated charger. Follow the charging instructions provided with your barcode scanner. Ensure the charger is compatible with Li-ion batteries and meets the voltag요구사항

첫 번째 사용:

최적의 성능을 위해서는 처음 사용하기 전에 배터리를 완전히 충전하는 것이 좋습니다.

배터리 수명:

Battery life varies depending on usage patterns and environmental conditions. Regular charging and proper maintenance will help prolong the battery's lifespan.

6. 유지관리

Proper maintenance ensures the longevity and performance of your KDC-BAT180 battery:

• 저장: If storing the battery for an extended period, store it in a cool, dry place, ideally at room temperature (around 20-25°C or 68-77°F) and partially charged (around 50%). Do not store above 60°C (140°F).
• 청소: Keep the battery contacts clean and free from dust or debris. Use a dry, soft cloth to wipe the contacts if necessary.
• 극한의 온도를 피하세요: 배터리를 극심한 고온이나 저온에 노출시키지 마십시오. 성능이 저하되고 수명이 단축될 수 있습니다.
• 정기적 사용: For best results, use and recharge the battery regularly.

7. 문제 해결

If you encounter issues with your KDC-BAT180 battery, consider the following:

• 배터리가 충전되지 않음: Ensure the battery is correctly inserted into the scanner and the scanner is properly connected to a working charger. Check the charger and charging cable for damage.
• 배터리 수명이 짧음: This can be due to heavy usage, aging battery, or extreme operating temperatures. Ensure the battery is fully charged. If the issue persists after prolonged use, the battery may be nearing the end of its lifespan.
• 장치 전원이 켜지지 않음: Confirm the battery is fully charged and correctly installed. If the device still does not power on, the issue may lie with the scanner itself, not the battery.

If troubleshooting steps do not resolve the issue, please refer to the support section.

8. 사양

9. 보증 및 지원

For warranty information or technical support regarding your Henhaoro KDC-BAT180 battery, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.