소개
Thank you for choosing BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers. This manual provides essential information for the proper installation, operation, and maintenance of your new car speakers. Please read this manual thoroughly before installation and keep it for future reference. Proper installation ensures optimal performance and longevity of the product.
Image: BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers shown with their retail packaging, highlighting the product and its branding.
안전 정보
설치 및 작동 중에는 항상 다음 안전 예방 조치를 준수하세요.
- 단락을 방지하기 위해 전기 작업을 시작하기 전에 차량 배터리의 음극 단자를 분리하십시오.
- Ensure all wiring is properly insulated to prevent damage to the vehicle's electrical system or the speakers.
- 운전자의 시야를 가리는 위치에 스피커를 설치하지 마십시오. view 또는 차량 안전 기능(예: 에어백)을 방해할 수 있습니다.
- 설치 시에는 적절한 도구를 사용하고 안전 안경을 착용하십시오.
- 청력 손상을 유발할 수 있으므로 장시간 지나치게 큰 소리로 음악을 듣는 것을 피하십시오.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 2 x BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers
- 2 x 스피커 그릴
- 장착 하드웨어(나사, 클립)
설정 및 설치
Careful installation is crucial for optimal sound quality and speaker longevity. If you are unsure about any step, consult a professional car audio installer.
1. 설치 전 점검
- Confirm speaker compatibility with your vehicle's existing speaker openings. The mounting hole diameter is 6.06" x 8.74".
- Check the available mounting depth. The top mount depth for these speakers is 1.42".
- Ensure you have all necessary tools: screwdrivers, wire strippers, crimpers, drill (if new holes are needed), and safety gear.
2. 스피커 장착
- Carefully remove the existing speakers or trim panels from the desired installation location (e.g., door panels, rear deck).
- Position the new BPS-E693 speaker in the opening. Ensure it fits without obstruction.
- Mark the screw holes if they do not align with existing ones. Drill pilot holes if necessary, being careful not to damage any underlying wiring or vehicle components.
- Secure the speaker using the provided mounting hardware. Do not overtighten the screws.
- Attach the speaker grille over the installed speaker for protection and a finished look.
이미지: 사이드 프로file view of the BLAUPUNKT BPS-E693 speaker, illustrating its shallow mounting depth for easier installation in various vehicle types.
Image: The BLAUPUNKT BPS-E693 speaker with its protective grille in place, demonstrating the finished appearance after installation.
3. 스피커 배선
The BPS-E693 speakers are designed for straightforward connection to your car's audio system.
- Identify the positive (+) and negative (-) terminals on the speaker. These are typically marked on the speaker's terminal block.
- Connect the positive (+) speaker wire from your car's audio system to the positive (+) terminal on the speaker.
- Connect the negative (-) speaker wire from your car's audio system to the negative (-) terminal on the speaker.
- Ensure all connections are secure and properly insulated to prevent short circuits and signal loss.
- Once wired, reassemble any removed trim panels.
이미지: 후면 view of the BLAUPUNKT BPS-E693 speaker, clearly showing the magnet structure and the speaker terminals for wiring connections.
작동 지침
After successful installation, you can begin enjoying your new BLAUPUNKT speakers.
- 차량 오디오 시스템을 켜세요.
- 낮은 볼륨으로 시작해서 점차 듣기 편한 수준으로 높이세요.
- Adjust the bass, treble, and balance settings on your head unit to fine-tune the sound to your preference. The 3-way design of these speakers provides a full range of sound, allowing for detailed adjustments.
- Avoid pushing the speakers to extreme volumes for extended periods, as this can lead to distortion and potential damage.
유지
To ensure the longevity and optimal performance of your BLAUPUNKT speakers, follow these simple maintenance guidelines:
- 청소: 부드럽고 마른 천을 사용하여 스피커 그릴과 콘의 먼지를 부드럽게 닦아주세요. 강한 화학 물질이나 연마성 세척제는 사용하지 마세요.
- 점검: Periodically check the speaker connections to ensure they are secure.
- 환경: Protect the speakers from excessive moisture and direct sunlight, which can degrade materials over time.
문제 해결
스피커에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스피커에서 소리가 나지 않음 | Loose or incorrect wiring; head unit off or muted; amplifier issue (if applicable) | Check all wiring connections for security and correct polarity. Ensure head unit is on and not muted. Verify amplifier is powered and functioning. |
| 왜곡되거나 불분명한 소리 | Volume too high; incorrect audio settings; damaged speaker wire; speaker damage | Reduce volume. Adjust bass/treble settings. Inspect speaker wires for fraying or damage. If distortion persists at moderate volumes, speaker may be damaged. |
| 스피커 1개가 작동하지 않음 | Loose connection to that specific speaker; balance setting incorrect; speaker damage | Check wiring for the non-working speaker. Adjust the balance setting on your head unit. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/head unit channel. |
명세서
Detailed technical specifications for the BLAUPUNKT BPS-E693 6x9 3-Way Car Speakers:
| 특징 | 사양 |
|---|---|
| 모델명 | 850053034145 |
| 스피커 유형 | 동축, 3방향 |
| 스피커 크기 | 6x9인치 |
| 우퍼 직경 | 6 Inches (part of 6x9 oval) |
| 피크 전력 출력 | 140와트(쌍당) |
| RMS 전원 출력 | 70와트(쌍당) |
| 감광도 | 86.5데시벨 |
| 장착 구멍 직경 | 6.06인치 x 8.74인치 |
| Top Mount Depth | 1.42인치 |
| 제품 치수 | 5인치 깊이 x 7인치 너비 x 9인치 높이 |
| 품목 무게 | 2.84킬로그램(6.24파운드) |
| 포함된 구성 요소 | 2 스피커를 X |
| 연결 기술 | RCA (for audio signal input) |
| 오디오 출력 모드 | 스테레오 재생 |
| 장착 유형 | 문 |
| 방수 | 거짓 |
보증 정보
BLAUPUNKT BPS-E693 speakers come with a Limited Warranty. Please refer to the warranty card included with your product or contact BLAUPUNKT customer support for specific terms and conditions regarding coverage, duration, and service procedures.
지원하다
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact BLAUPUNKT customer support. Contact information can typically be found on the official BLAUPUNKT web사이트 또는 제품 포장에 표시되어 있습니다.
