1. 서론
The ABSINA Mobile Wallbox 11 kW 16A is a versatile and portable charging solution for electric vehicles. Designed for both home and travel use, it offers convenient and safe charging with integrated app control and RFID activation. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.
Figure 1: ABSINA Mobile Wallbox 11 kW 16A. This image shows the compact design of the wallbox with its CEE plug and Type 2 charging connector.
2. 안전 지침
기기를 사용하기 전에 모든 안전 지침을 주의 깊게 읽으십시오. 지침을 따르지 않으면 감전, 화재 또는 심각한 부상이 발생할 수 있습니다.
- Ensure the power supply meets the specified requirements (3 phases 415 V 50/60 Hz).
- 케이블이나 플러그가 손상된 경우 장치를 사용하지 마십시오.
- 기기를 직접 열거나 수리하려고 하지 마십시오. 자격을 갖춘 전문가에게 서비스를 의뢰하십시오.
- Keep the device away from water and extreme temperatures. The device is IP65 rated, but avoid submersion.
- 반드시 적절한 접지를 확인하십시오.
- The integrated Type A+DC6 mA residual current circuit breaker provides enhanced safety. Do not bypass or modify it.
- Before installation, contact your local grid operator to register the wallbox as required.
Figure 2: Maximum Safety Features. The image highlights the Type A 30mA AC residual current protection and Type B 6mA DC fault current protection for enhanced user safety.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- ABSINA Mobile Wallbox 11 kW 16 A (three-phase)
- 3 x RFID Chips
- 3 x RFID 카드
- 벽걸이 브라켓
- 설치 재료 (나사, 앵커)
- 사용 설명서 (본 문서)
4. 설정 및 설치
The ABSINA Mobile Wallbox is designed for "Plug and Play" use, requiring no complex installation. However, for permanent mounting, a wall bracket is included.
4.1 초기 설정 (플러그 앤 플레이)
- 전원에 연결: Insert the CEE plug of the Wallbox into a compatible 3-phase 415 V 50/60 Hz CEE socket.
- 전원 켜기: The Wallbox will power on automatically. If the indicator light blinks red, press the emergency stop button once to reset.
- 사용 준비: The Wallbox is now ready for charging, which can be activated via RFID or the app.
Figure 3: Plug & Play Functionality. This image illustrates the simple connection of the CEE plug to a power outlet, emphasizing ease of use without complex electrical installation.
4.2 벽면 장착(선택 사항)
For a more permanent setup, use the provided wall mount bracket and hardware.
- 위치를 선택하십시오 : Select a suitable wall location near a compatible CEE socket, ensuring adequate ventilation and protection from direct weather exposure (though the unit is IP65 rated).
- 드릴링 지점 표시: Use the wall mount bracket to mark the drilling points on the wall.
- 드릴 구멍: Drill holes at the marked points and insert the provided anchors.
- 안전한 브라켓: Attach the wall mount bracket to the wall using the screws.
- Mount Wallbox: Carefully slide the Wallbox onto the mounted bracket until it clicks securely into place.
Figure 4: Easy Operation. The image shows the Wallbox mounted on a wall, connected to a vehicle, demonstrating its simple "Connect. Charge." principle.
5. 사용 설명서
5.1 전기차 충전
- 차량 연결: Plug the Type 2 charging cable from the Wallbox into your electric vehicle's charging port.
- 충전을 시작하세요:
- Using RFID: Hold one of the provided RFID chips or cards over the RFID reader area on the Wallbox. The Wallbox will activate, and charging will begin.
- 앱 사용: Open the ABSINA app (or compatible smart home app like Tuya Smart) on your smartphone. Select the Wallbox and initiate charging from the app interface.
- 모니터 충전: The app provides real-time data including charging voltage (V), current (A), power (kW), charged energy (kWh), and charging time.
- 충전 중지:
- Using RFID: Hold the RFID chip/card over the reader again to stop charging.
- 앱 사용: Stop charging directly from the app.
- Disconnect Vehicle: Once charging is complete or stopped, unplug the Type 2 cable from your vehicle.
Figure 5: Misuse Protection. The image shows a hand activating the Wallbox with an RFID chip, illustrating the secure activation method.
5.2 앱 제어 기능
The dedicated app (or compatible smart home app) provides advanced control and monitoring capabilities:
- 충전 전류를 조정하세요: Set the charging current from 8 A to 16 A in 1 A increments to manage charging speed.
- Set Charging Mode: Choose preferred charging modes.
- 충전 일정: Utilize the charging delay function to start charging at a later time.
- 실시간 데이터 모니터링: View live charging statistics.
- 원격 시작/정지: Control charging sessions from your smartphone.
메모: While the app displays charging data, this data is typically not stored permanently on the device once the charging cable is disconnected. For historical charging data, refer to your vehicle's own app if available.
6. 유지관리
To ensure the longevity and optimal performance of your ABSINA Mobile Wallbox, follow these maintenance guidelines:
- 청소: Wipe the exterior of the Wallbox with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the device is unplugged before cleaning.
- 케이블 검사: Regularly inspect the charging cable and CEE plug for any signs of damage, fraying, or wear. If damage is found, discontinue use immediately and contact support.
- 커넥터 관리: Keep the Type 2 connector clean and free of debris. Ensure the protective cap is in place when not in use.
- 저장: When not in use, especially during travel, store the Wallbox in a dry, cool place, protected from direct sunlight and extreme temperatures.
Figure 6: Mobile Wallbox for Travel. This image shows the Wallbox conveniently stored in a car trunk, highlighting its portability and ease of transport.
7. 문제 해결
If you encounter issues with your ABSINA Mobile Wallbox, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Wallbox does not power on. | No power from CEE socket; CEE plug not fully inserted; internal fault. | Check CEE socket power supply; ensure plug is fully inserted; try a different CEE socket if available. |
| 충전이 시작되지 않습니다. | RFID not read correctly; app connection issue; vehicle not ready to charge; emergency stop engaged. | Ensure RFID chip/card is held correctly; check app connection and Wallbox status; ensure vehicle is ready to accept charge; press emergency stop button once to reset. |
| 충전이 예기치 않게 중단됩니다. | Overload protection activated; vehicle charging complete; power interruption. | Check for error codes on Wallbox/app; verify vehicle charging status; check CEE socket power. |
| App not connecting to Wallbox. | Wi-Fi signal weak; incorrect app settings; Wallbox not in pairing mode. | Ensure strong Wi-Fi signal at Wallbox location; restart app and Wallbox; refer to app's pairing instructions. |
If the problem persists after attempting these solutions, please contact ABSINA customer support.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 압시나 |
| 모델 번호 | 301018 |
| 충전 전력 | 11kW(XNUMXkW) |
| 충전 전류 | Adjustable 8 A to 16 A |
| 단계 | 3상 |
| 입력 Voltage | 415V 교류 |
| 빈도 | 50/60Hz |
| 커넥터 유형 | Type 2 (output), CEE 16A (input) |
| 보호 등급 | IP65 (방수) |
| 안전 기능 | Integrated Type A+DC6 mA RCD, Overvoltag전자, 언더볼tage, Overload, Temperature, Short-circuit protection |
| 가연성 등급 | UL94V-0 |
| 품목 무게 | 2.25 킬로그램 |
| 제품 크기(L x W x H) | 25.7 x 15.3 x 9.5cm |
| 대기 소비량 | < 3 와트 |
9. 보증 및 지원
ABSINA products are designed for reliability and performance. For warranty information and technical support, please refer to the official ABSINA web사이트를 방문하거나 고객 서비스에 직접 문의하세요.
The manufacturer, ABSINA GmbH, is based in Germany and is committed to providing competent support.
연락처 정보: Please visit the official ABSINA website for the most up-to-date contact details for customer support and warranty claims.
