1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light. This unit is designed to meet code requirements for emergency egress lighting in commercial buildings, offering both an illuminated exit sign and emergency lighting with adjustable LED heads.
이미지 1.1: 이상view of the Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light units.
2. 안전 정보
Please read and understand all instructions before installation and operation. Retain this manual for future reference.
- 전기 안전: All wiring must be performed by a qualified electrician in accordance with national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
- 제품 무결성: Do not modify or alter the product. Use only manufacturer-specified replacement parts.
- 위치: This unit is UL certified and damp location listed. Ensure the installation environment is suitable.
- 배터리: The unit contains a nickel-cadmium battery. Dispose of batteries according to local regulations.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Sure-Lites All-Pro APC7RG Combination LED Exit Sign and Emergency Light Unit
- Snap-fit canopy with captive mounting screws
- Directional chevrons (snap-in/snap-out)
- Installation hardware (screws, wire nuts)
- Nickel Cadmium Battery (pre-installed or separate)
4. 설정 및 설치
The APC7RG is designed for easy installation with universal J-box mounting and snap-fit construction, allowing for installation in under 5 minutes.
4.1 장착 옵션
The unit offers universal surface mounting flexibility and can be configured for:
- 천장 장착
- 벽면 장착
- End mount
It supports configurable single or double faces.
Image 4.1: Key installation and performance features.
4.2 배선
- 회로 차단기의 전원이 꺼져 있는지 확인하세요.
- Connect the unit's wiring to the building's AC power supply (120V) according to local electrical codes.
- Secure the unit to the universal J-box using the provided hardware and snap-fit canopy.
4.3 Field Selectable Features
The APC7RG exit face is illuminated with long-lasting LEDs that are field selectable for red or green letters. The unit is pre-set to red letters and can be easily changed to green letters during installation. Snap-in/snap-out directional chevrons (arrows) can also be configured to indicate the direction of egress.
이미지 4.2: 폭발 view highlighting field-selectable features and components.
이미지 4.3: Example of selectable red or green exit sign faces in commercial environments.
5. 사용 설명서
5.1 정상 작동
When AC power is supplied, the LED exit sign will illuminate, and the battery will charge. A power indicator light (usually green) located on the bottom of the exit sign will confirm AC power is present and the battery is charging.
5.2 비상운전
In the event of an AC power failure, the unit will automatically switch to battery backup mode. The exit sign and emergency lights will operate for a minimum of 90 minutes, providing up to 17 feet of emergency egress coverage.
5.3 테스트
A test switch is located on the bottom of the exit sign. Press and hold the test switch to simulate a power outage. The unit should switch to battery power, and the exit sign and emergency lights should illuminate. Release the switch to return to normal operation. Regular testing is recommended to ensure proper functionality.
6. 유지관리
- 배터리: The nickel-cadmium battery is designed for no maintenance. However, it is recommended to perform monthly 30-second functional tests and annual 90-minute discharge tests to ensure the battery holds a charge and the unit operates correctly during an emergency.
- 청소: 부드러운 천으로 장치 외부를 청소하십시오. damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 점검: Periodically inspect the unit for any physical damage or discoloration.
7. 문제 해결
일반적인 문제와 해결 방법은 아래 표를 참조하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Exit sign or emergency lights do not illuminate during power outage. | Battery not charged or faulty; unit not connected to AC power. | Ensure AC power is connected and indicator light is on. Allow 24 hours for initial battery charge. If problem persists, battery may need replacement. |
| 전원 표시등이 꺼져 있습니다. | No AC power; faulty wiring; indicator light malfunction. | Check circuit breaker. Verify wiring connections. Contact a qualified electrician if necessary. |
| Emergency lights do not stay on for 90 minutes during test. | 배터리 용량이 감소했습니다. | Perform a full 90-minute discharge test and recharge. If run time is still insufficient, the battery may need replacement. |
8. 사양
Key technical details for the Sure-Lites All-Pro APC7RG unit:
Image 8.1: Product dimensions and certifications.
| 특징 | 세부 사항 |
|---|---|
| 상표 | 슈어라이트 |
| 모델명 | APC7RG Case Pack |
| 부품 번호 | APC7RG |
| 재료 | High-impact, UV resistant thermoplastic (Polycarbonate) |
| 색상 | White finish, Red/Green selectable light |
| 제품 크기(L x W x H) | 16.57인치 x 2.32인치 x 8.26인치 |
| 광원 유형 | 주도의 |
| 광원의 수 | 2 (emergency heads) |
| 왓tage | 2.01 와트 |
| 명도 | 156루멘 |
| 권tage | 120 볼트 |
| 전원 | 코드식 전기 |
| 배터리 유형 | Nickel Cadmium (NiCAD) |
| Average Battery Life (Emergency Run Time) | 90 분 |
| Egress Coverage | 최대 17피트 |
| 설치 유형 | Flush Mount (Universal J-box) |
| 인증 | UL 924, NEC, NFPA101, NFPA70, CEC Title 20 compliant, Damp 나열된 위치 |
| 품목 무게 | 21.4파운드(8팩 기준) |
9. 보증 및 지원
9.1 보증 정보
The Sure-Lites All-Pro APC7RG unit comes with a 5-year limited warranty. The NiCad battery carries a seven-year pro-rated warranty. Please refer to the warranty documentation included with your purchase for full terms and conditions.
9.2 고객 지원
For technical assistance, replacement parts, or warranty claims, please contact Sure-Lites customer support. Contact information can typically be found on the manufacturer's web사이트 또는 제품 포장에 표시되어 있습니다.
