SENIX 40V 18-inch Cordless Snow Blower

중요한 안전 정보

Always unplug the snow blower before performing any maintenance or cleaning. Keep hands and other body parts away from the auger and chute while the machine is operating. Wear appropriate safety gear, including gloves and eye protection. Do not operate the snow blower in enclosed spaces to prevent carbon monoxide poisoning. Always follow the manufacturer's instructions for proper use and storage.

제품 끝view

The SENIX 40V 18-inch Cordless Snow Blower (Model STX2-M) is designed for efficient and convenient snow removal. It combines powerful performance with user-friendly features to tackle winter conditions.

• 배터리 구동: Utilizes 2 x 20V/40V Max* 5Ah Lithium batteries for cordless operation.
• Clearing Path: 18-inch clearing width, capable of clearing 8-inch deep snow.
• 눈 던지기 거리: 최대 9미터(33피트)까지 눈을 날려 보냅니다.
• 가변 속도 제어: Dual-blade steel auger with variable speed control for efficient clearing of various snow types.
• 다양한 용도: Ideal for driveways, sidewalks, walkways, porches, and decks.
• 내구성 있는 구조: Weather-resistant heavy-duty steel and composite materials.
• 향상된 가시성: Built-in LED light bar for use in low-light conditions.
• 포함된 액세서리: Comes with two 20V/40V Max* 5.0 Ah lithium-ion batteries and a dual port battery charger.

1. 조립 설명서

Follow these steps to assemble your SENIX 40V 18-inch Cordless Snow Blower. Refer to the included parts diagram and assembly video for visual guidance.

1. 구성 요소 풀기: 포장에서 모든 부품을 조심스럽게 꺼내십시오. 설명서에 나와 있는 모든 구성품이 있는지 확인하십시오.
2. 하단 손잡이를 부착하세요: Connect the lower handle section to the main unit using the provided fasteners. Ensure a secure fit.
3. 상단 손잡이를 부착하세요: Secure the upper handle, which contains the controls, to the lower handle. Use the orange turning tabs to tighten the connections. Ensure cables are neatly routed and secured with retainer clips.
4. Install Discharge Chute: Align the discharge chute with the opening on the snow blower. Insert the bolt with the plastic piece to secure it. Rotate the chute until it drops into place and aligns with the control mechanism.
5. 최종 점검: Verify all connections are tight and all safety features are correctly installed and functional.

Figure 1: Parts Diagram of the SENIX 40V 18-inch Cordless Snow Blower.

Video 1: Detailed assembly guide for the SENIX 18-inch Snow Blower. This video demonstrates step-by-step instructions for putting the unit together, including attaching handles, installing the chute, and connecting controls.

2. 배터리 충전 및 설치

The snow blower is powered by two 20V/40V Max* 5.0 Ah lithium-ion batteries. Ensure batteries are fully charged before first use.

1. 배터리 충전: Place both batteries into the dual port charger. The charger will indicate charging status. Allow approximately 140 minutes for a full charge from empty.
2. 배터리 설치: Open the battery compartment on the snow blower. Insert both charged batteries firmly into their respective slots until they click into place. Close the compartment cover.
3. 배터리 관리 : Store batteries indoors in a warm environment, especially in cold weather, to optimize performance and lifespan.

Figure 2: SENIX 2x5000mAh Batteries with charge indicators.

3. 사용 설명서

Familiarize yourself with the controls and features before operating the snow blower.

1. 단원 시작하기: Press and hold the safety switch button, then squeeze the main trigger handle to start the motor. Release the trigger to stop.
2. 가변 속도 제어: Use the variable speed control lever on the handle to adjust the auger speed according to snow conditions. Higher speeds are suitable for light, fluffy snow, while lower speeds are better for heavy, wet snow.
3. 낙하산 조정하기: The 180-degree chute rotation allows you to direct snow anywhere. Use the chute control rod handle to adjust the direction and the push-button lever to adjust the throwing angle (upward or downward).
4. LED 조명 사용: Activate the built-in LED light bar for improved visibility during early morning or late evening snow removal.
5. 제설 작업: Push the snow blower forward at a steady pace. For optimal performance, overlap each clearing path slightly.

Figure 3: Clearing Path Demonstration (18" Width, 8" Depth).

Figure 4: Snow Throwing Distance (Up to 33 feet).

Figure 5: Adjustable Snow Chute for directing snow.

Figure 6: Built-in LED Light for low-light conditions.

Video 2: Short demonstration of the 18-inch Cordless Snow Blower clearing snow.

Video 3: The 18-inch snow blower in operation, showcasing는 그 성능을 나타냅니다.

Video 4: General operation of the SENIX snow blower in a snowy environment.

4. 유지보수 및 보관

정기적인 유지관리는 제설기의 수명과 최적의 성능을 보장합니다.

• 청소: After each use, remove any snow, ice, or debris from the auger, chute, and housing. Always unplug the batteries before cleaning.
• 점검: Periodically check the auger blades for wear or damage. Inspect all fasteners and ensure they are tight.
• 저장: For compact storage, the handle can be folded forward. Store the snow blower in a dry, protected area. Remove batteries before long-term storage.

Figure 7: Snow Blower folded for easy and space-saving storage.

5. 문제 해결

If you encounter issues with your snow blower, refer to these common troubleshooting tips:

• 장치가 시작되지 않음: Ensure both batteries are fully charged and properly inserted. Check that the safety switch button is pressed before engaging the trigger handle.
• 성능 저하: Verify that the auger is clear of any obstructions. Check battery charge level, as low power can affect performance.
• Snow Not Throwing Far: Adjust the chute angle for optimal throwing distance. Ensure the auger speed is appropriate for the snow type.
• 과열: If the unit stops unexpectedly, allow it to cool down. Ensure proper ventilation around the motor.

For persistent issues, consult the full instruction manual or contact SENIX customer support.

6. 사양

7. 보증 및 지원

SENIX provides comprehensive warranty coverage for your product:

• Snow Blower: Covered by a 5-year limited warranty.
• 배터리 충전기: Covered by a 3-year limited warranty.

For warranty claims or technical support, please refer to the contact information provided in your product packaging or visit the official SENIX web대지.