로보타임 MC801 빈tage Car 및 AMK63 매직 첼로 뮤직 박스 3D 나무 퍼즐 키트 사용 설명서

1. 서론

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME MC801 Vintage Car and AMK63 Magic Cello Music Box 3D Wooden Puzzle Kits. Please read this manual thoroughly before beginning assembly to ensure a smooth and enjoyable building experience.

그림 1: 이상view of the ROBOTIME MC801 Vintage Car and AMK63 Magic Cello Music Box.

2. 안전 정보

• 소형 부품 경고: This kit contains small parts which may pose a choking hazard. Keep out of reach of small children.
• 날카로운 모서리: 일부 나무 조각에는 날카로운 모서리가 있을 수 있습니다. 조립 시 주의해서 다루십시오.
• 성인 감독: 어린이들이 블록 쌓기를 할 때는 어른의 감독이 권장됩니다.
• 가연성 물질: 목재 부품은 가연성이 있으므로 화기 및 고온 열원 근처에 두지 마십시오.

3. 패키지 내용

패키지를 열면 다음과 같은 구성품이 들어 있습니다.

• Pre-cut wooden puzzle sheets for MC801 Vintage 자동차.
• Pre-cut wooden puzzle sheets for AMK63 Magic Cello Music Box.
• 사용 설명서(본 설명서).
• Small accessories (e.g., springs, gears, music box mechanism, sandpaper, wax) as required for each model.

메모: The kit is designed for "No Glue Needed" assembly, utilizing interlocking pieces.

Figure 2: The MC801 Vintage Car highlighting key features like piece count and glue-free assembly.

4. 조립 설명서

Follow these general tips and specific instructions for each model. It is recommended to assemble one model completely before starting the next.

4.1. 총회 관련 유의사항

• 미리 읽어보세요: Review all steps for a section before beginning.
• 부품 식별: Carefully identify each part from the wooden sheets before detaching.
• 부품 분리: Gently push out parts. If a part is stubborn, use a craft knife (with caution) to carefully cut the connecting points.
• 샌딩 : Use the included sandpaper to smooth any rough edges or burrs on the detached pieces.
• Waxing (for moving parts): For gears and other moving components, apply a small amount of wax (if included) to reduce friction and ensure smooth operation.
• 온화한 힘: Apply gentle, even pressure when fitting pieces together. Do not force parts, as this may cause breakage.

4.2. ROBOTIME MC801 Vintage Car Assembly

MC801 Vintage Car is a detailed model consisting of approximately 296 pieces. Follow the numbered steps in the included diagrammatic instructions for precise assembly.

1. Begin by assembling the chassis and base structure of the car.
2. Attach the engine components and front grille.
3. Assemble and install the four wheels, ensuring they can rotate freely.
4. Construct the passenger compartment, including seats and dashboard.
5. Add the roof and any decorative elements.
6. Verify all connections are secure and the model is stable.

Figure 3: Assembled ROBOTIME MC801 Vintage 자동차.

Figure 4: The ROBOTIME MC801 Vintage Car in a display setting.

4.3. ROBOTIME AMK63 Magic Cello Music Box Assembly

The AMK63 Magic Cello Music Box is a functional model that plays music upon completion. Pay close attention to the gear mechanisms.

1. Start by building the base and the main body of the cello.
2. Carefully assemble the internal gear system and the music box mechanism. Ensure all gears mesh correctly and rotate freely after waxing.
3. Integrate the music box component into the cello body.
4. Attach the neck, scroll, and tuning pegs.
5. Add decorative elements and the bow.
6. Test the music box mechanism by gently winding it.

Figure 5: Assembled ROBOTIME AMK63 Magic Cello Music Box.

5. 운영

5.1. ROBOTIME MC801 Vintage카

MC801 Vintage Car is primarily a static display model. Its wheels are designed to rotate, allowing for manual movement across flat surfaces. There are no motorized or wind-up functions for propulsion.

5.2. ROBOTIME AMK63 Magic Cello Music Box

To operate the music box:

1. Locate the winding key or mechanism, typically found on the side or bottom of the base.
2. Gently turn the key clockwise until you feel a slight resistance. Do not overwind, as this can damage the mechanism.
3. Release the key, and the music box will begin to play its melody. The AMK63 plays "Nocturne in E Flat, Op. 9 No. 2".

Figure 6: The AMK63 Magic Cello Music Box, highlighting its musical function.

6. 유지관리

• 청소: Dust the models regularly with a soft, dry cloth or a soft brush. Avoid using water or chemical cleaners, as they may damage the wood.
• 저장: Store the models in a dry environment, away from direct sunlight and extreme temperature fluctuations, to prevent warping or fading of the wood.
• 움직이는 부품: If any moving parts (especially on the music box) become stiff, apply a small amount of wax (paraffin wax or beeswax) to the contact points.

7. 문제 해결

• 부품이 맞지 않음: If pieces are too tight, gently sand the connecting tabs. If too loose, a tiny drop of wood glue (not included) can be used, but this is generally not recommended for these kits.
• 깨진 조각: If a piece breaks during assembly, attempt to repair it with wood glue. Contact customer support if a critical piece is irreparably damaged.
• 오르골이 작동하지 않습니다:
  • Ensure the winding mechanism is fully wound (but not overwound).
  • Check if any gears are jammed or misaligned. Gently adjust if possible.
  • Apply wax to gears if friction is preventing movement.

8. 사양

9. 보증 및 지원

ROBOTIME products are manufactured with high-quality standards. If you encounter any issues with missing or defective parts, or require assistance with assembly, please contact ROBOTIME customer support through the retailer where the product was purchased or visit the official ROBOTIME web지원 정보를 제공하는 사이트입니다.

보증 청구를 위해 구매 증명서를 보관하십시오.