소개
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Globe Electric Clarissa 1-Light Wall Sconce. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Clarissa Wall Sconce features a matte brass finish with a white pleated fabric shade, designed to provide ambient lighting. It requires one E12/candelabra base 60W bulb (sold separately) and is compatible with LED and incandescent bulbs. The fixture is dimmable when used with a compatible dimmer switch (also sold separately).
안전 정보
경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈 박스 또는 회로 차단기의 전원을 분리하세요.
- 모든 전기 연결은 지역 규정 및 조례는 물론 국가 전기 규격(NEC)을 준수해야 합니다.
- 전기 배선에 익숙하지 않은 경우 자격을 갖춘 전기 기술자에게 문의하세요.
- 이 조명기구를 습하거나 건조한 곳에 설치하지 마십시오.amp locations. This product is designed for indoor use only.
- 지정된 전구 유형 및 와트만 사용하십시오.tage (E12/Candelabra Base, max 60W). Exceeding the maximum wattage may cause overheating and damage to the fixture.
- Always allow the bulb to cool before replacing it.
- Do not operate the fixture with a damaged cord or if it has been dropped or damaged in any way.
- 가연성 물질을 조명기구 근처에 두지 마세요.
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Wall Sconce Fixture (Matte Brass)
- White Pleated Fabric Shade
- 설치 하드웨어(가로대, 장착 나사, 전선 너트)
- 사용 설명서
Note: E12/Candelabra Base 60W bulb and dimmer switch are sold separately and are not included in this package.
설정 및 설치
Before you begin, ensure the power is turned off at the circuit breaker or fuse box.
필요한 도구 (포함되지 않음):
- Phillips 헤드 스크루 드라이버
- 전선 스트리퍼
- 전기 테이프
- 안전 안경
설치 단계:
- 전원 끄기: Locate the circuit breaker or fuse box and turn off the power to the wall switch outlet box where you will install the fixture.
- 장착 표면 준비: If replacing an existing fixture, carefully remove it. Ensure the electrical box is securely mounted and capable of supporting the fixture's weight.
- 장착용 가로대를 부착하십시오: Secure the mounting crossbar to the electrical outlet box using the provided mounting screws. Ensure the crossbar is level.
- 전기 연결을 만드십시오:
- 연결하다 검은색 고정물에서 전선까지 검은색 콘센트 박스에서 나오는 전선을 전선 너트로 연결합니다.
- 연결하다 하얀색 고정물에서 전선까지 하얀색 (중성) 전선을 전선 커넥터를 사용하여 콘센트 박스에서 나오도록 연결하십시오.
- 연결하다 지면 고정물에서 전선까지 지면 wire from the outlet box (or to the green ground screw on the crossbar) using a wire nut.
Ensure all wire nuts are securely tightened and wrap connections with electrical tape for added safety.
- 고정장치 장착: Carefully tuck the wires into the outlet box. Align the fixture base with the mounting screws on the crossbar and secure the fixture in place with the decorative nuts or screws provided.
- 전구 설치: Screw one E12/candelabra base 60W max bulb (sold separately) into the socket. Do not overtighten.
- 그늘을 부착하십시오: Carefully place the white pleated fabric shade onto the fixture according to the design.
- 복원력 : Turn the power back on at the circuit breaker or fuse box. Test the fixture.
Image: Dimensions of the Clarissa Wall Sconce. The fixture measures approximately 14.84 inches (37.7 cm) in height, 9.48 inches (24.1 cm) in width, and extends 5.68 inches (14.4 cm) from the wall.
이미지: 상세 view of the sconce, showing the matte brass arm and base, and the textured white pleated fabric shade.
작동 지침
Once installed and power is restored, operate the wall sconce using the wall switch connected to the fixture.
- 켜기/끄기: Use the standard wall switch to turn the light fixture on or off.
- 조광 기능: This fixture is fully dimmable. To utilize the dimming feature, you must install a compatible dimmer switch (sold separately) in place of a standard wall switch. Adjust the dimmer switch to achieve your desired light intensity.
- 전구 선택: You can choose between lower wattage bulbs for a softer, more intimate glow or higher wattage bulbs (up to 60W) for brighter illumination, depending on your preference.
Image: The Clarissa Wall Sconce illuminating a living room, demonstrating its aesthetic and functional contribution to the space.
유지
Regular maintenance ensures the longevity and optimal performance of your wall sconce.
- 청소: Disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish. The fabric shade can be gently dusted or spot cleaned with a damp 필요하다면 천을 사용하세요.
- 전구 교체: Ensure the power is off and the bulb has cooled completely before attempting to replace it. Unscrew the old bulb and screw in a new E12/candelabra base 60W max bulb.
- 검사: 모든 전기 연결부와 장착 하드웨어의 조임 상태를 주기적으로 점검하십시오.
문제 해결
벽등이 제대로 작동하지 않는 경우, 다음의 일반적인 문제와 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. |
|
|
| 빛이 깜박입니다. |
|
|
| Fixture is loose on the wall. |
|
|
If the problem persists after trying these solutions, contact a qualified electrician or Globe Electric customer support.
명세서
- 모델: Clarissa (65000083)
- 상표: 글로브 일렉트릭
- 유형: 1등 벽 보루
- 마치다: 매트 황동
- 그늘 재질 : White Pleated Fabric
- 치수: 10.37" L x 9.5" W x 14.88" H (approx. 26.3 cm L x 24.1 cm W x 37.8 cm H)
- 전구베이스: E12 / Candelabra
- 최대 와트tage: 60W(전구당)
- 전구 유형: 백열전구 또는 LED(전구는 포함되지 않음)
- 권tage: 120V
- 밝기 조절 가능: Yes, with compatible dimmer switch (sold separately)
- 설치 유형: Wall Mount, Corded Electric
- 실내/실외 사용: 실내 전용
- 품목 무게: 1.03파운드(약 0.47kg)
보증 정보
According to product specifications, this Globe Electric Clarissa Wall Sconce (Model 65000083) is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues upon purchase.
지원하다
For further assistance or inquiries regarding your Globe Electric product, please visit the official Globe Electric web사이트 또는 고객 서비스 부서에 문의하십시오.
Globe Electric Official Web대지: www.globe-electric.com
You may also refer to the Globe Electric store on Amazon for additional product information: Globe Electric Amazon Store
