1. 서론
Thank you for choosing the Parkside PKSA 40 Li B2 Cordless Chainsaw. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read this manual thoroughly before first use and keep it for future reference.
The Parkside PKSA 40 Li B2 is a powerful 40V cordless chainsaw designed for various cutting tasks. It features an innovative brushless motor for extended runtime and durability, adjustable chain speeds, and an automatic chain oiling system.
Image 1.1: Parkside PKSA 40 Li B2 Cordless Chainsaw. This image displays the complete chainsaw unit, highlighting its ergonomic design and key components such as the handle, chain, and guide bar.
2. 안전 지침
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Read all instructions before operating this product.
- 개인 보호 장비(PPE): 안전 안경, 귀 보호대, 장갑, 튼튼한 신발 등 적절한 개인 보호 장비를 항상 착용하십시오.
- 작업 영역: 작업 구역에 방해물이 없고, 조명이 밝으며, 특히 어린이와 애완동물을 포함한 주변 사람이 없는지 확인하세요.
- 배터리 안전: Use only recommended 20V (4 Ah) batteries (two required for operation) and chargers. Do not expose batteries to heat or direct sunlight.
- 체인 브레이크: Familiarize yourself with the chain brake mechanism for immediate chain stop in emergencies.
- 역류 방지: Be aware of kickback risks. Always maintain a firm grip with both hands and avoid cutting with the tip of the guide bar.
- 유지: Regularly inspect the chainsaw for damage, loose parts, or wear. Perform maintenance as described in this manual.
3. 설정
3.1 포장 풀기 및 조립
Carefully remove all components from the packaging. Ensure all parts are present and undamaged. The chainsaw comes with a protective scabbard for the guide bar.
- 가이드 바와 체인을 설치하세요: Follow the instructions in the separate assembly guide for proper installation of the guide bar and saw chain.
- 체인 텐셔닝: The chainsaw features tool-free rapid chain tensioning. Adjust the chain tension according to the instructions to ensure it is snug but can still be pulled freely by hand.
3.2 배터리 설치
This chainsaw requires two 20V (4 Ah) batteries from the Parkside X 20V Team series for operation. Batteries and charger are sold separately.
- 사용하기 전에 배터리가 완전히 충전되었는지 확인하십시오.
- Insert both batteries into their respective slots until they click into place.
- Check the battery capacity indicator on the device to confirm power.
3.3 체인 오일 저장소 채우기
The chainsaw has an automatic chain oiling system. It is crucial to keep the oil reservoir filled with appropriate chain lubricant.
- Locate the oil tank cap (imperdable design) and unscrew it.
- Fill the reservoir with high-quality chainsaw chain oil.
- Monitor the oil level through the oil level window during operation.
- 오일 탱크 캡을 단단히 닫으세요.
4. 사용 설명서
4.1 시작 및 중지
- 시작: Engage the two-hand safety switch. The "soft start" feature ensures a smooth, jerk-free chain start.
- 멎는: Release the trigger switch. The chain will stop immediately (within < 0.12 seconds) due to the quick-stop chain brake.
4.2 Chain Speed Selection
The chainsaw offers two adjustable chain speeds:
- 레벨 1: 15 m/s (for lighter tasks or increased control)
- 레벨 2: 20 m/s (for faster cutting and heavier tasks)
Select the appropriate speed based on the material and cutting requirements.
4.3 절단 기술
- 일반 절단: Always ensure a stable stance. Hold the chainsaw firmly with both hands.
- Felling Grip: Utilize the felling grip for comfortable angled sawing.
- Metal Stop Claw: Use the robust metal stop claw to brace the chainsaw against the wood for improved stability and leverage during cuts.
- 역류를 방지하세요: Never cut with the tip of the guide bar. Always be aware of the position of the guide bar and potential kickback zones.
5. 유지관리
정기적인 유지관리는 전기톱의 수명과 안전한 작동을 보장합니다.
- 체인 샤프닝: A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly or replace it when dull.
- 체인 오일링: Continuously monitor the oil level via the window and refill as needed.
- 가이드 바 유지 관리: 가이드 바 홈과 오일 구멍을 정기적으로 청소하세요. 가이드 바를 주기적으로 뒤집어 마모가 고르게 유지되도록 하세요.
- 청소: After each use, clean the chainsaw housing, cooling vents, and chain area from sawdust and debris.
- 저장: Store the chainsaw with the protective scabbard in a dry, secure place, out of reach of children. Remove batteries before storage.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전기톱이 작동하지 않습니다. | Batteries not inserted correctly or discharged. Two-hand safety switch not engaged. | Ensure both batteries are fully charged and correctly inserted. Engage the two-hand safety switch. |
| 체인이 움직이지 않거나 느리게 움직입니다. | Chain tension too tight. Chain dull or damaged. Low battery power. | Adjust chain tension. Sharpen or replace chain. Recharge or replace batteries. |
| No chain oil flow. | Oil reservoir empty. Oil passages blocked. | Refill oil reservoir. Clean oil passages and guide bar groove. |
| 과도한 진동. | 체인이 헐거워졌거나, 체인 또는 가이드 바가 손상되었습니다. | Adjust chain tension. Inspect and replace damaged components. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | PKSA 40 Li B2 |
| 상표 | 파크사이드 |
| 모터 유형 | 무브러시 |
| 권tage | 40V(2 x 20V) |
| 권장 배터리 | 2 x 20 V (4 Ah) Parkside X 20V Team series (not included) |
| Chain Speed Level 1 | 15m/초 |
| Chain Speed Level 2 | 20m/초 |
| 절단 길이 | 약 38cm |
| Chain Stop Time | < 0.12초 |
| 치수(길이 x 너비 x 높이) | 대략. 80 x 21.5 x 25cm |
| 무게(배터리 제외) | 약 3.6kg |
| 포함된 액세서리 | 1 protective scabbard for guide bar |
8. 보증 및 지원
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Parkside customer service. Keep your proof of purchase for warranty claims.
참고: 제품 상세 정보에는 예비 부품 구매 가능 여부에 대한 정보가 제공되지 않습니다.
