소개
The Frigga M2D is a reusable USB temperature data logger designed for accurate and reliable temperature monitoring. It features an advanced internal sensor with a measuring range of -30°C to +70°C (-22°F to +158°F) and a memory capacity of up to 14,400 readings. This device is suitable for various applications requiring precise temperature recording, such as cold chain logistics, food storage, pharmaceutical monitoring, and laboratory use.
설정
Before initial use, the Frigga M2D data logger requires configuration using the complimentary Frigga Data Software. This software is compatible with Windows and Mac OS and allows you to set logging conditions such as delayed start, logging intervals, temperature units (Fahrenheit/Celsius), time zones, and temperature alarm ranges. The software can be downloaded from the official Frigga web대지.
Important Configuration Notes:
- Ensure the 'Stop' button function is set to 'Allow' in the software settings.
- Ensure the 'Restart' option is set to 'Allow' for subsequent uses.
- The device is factory-set with a 30분 시작 지연. During this delay, the logger will not immediately begin recording after pressing the start button. An hourglass icon will appear on the display, and the blue light will flash every 10 seconds. This delay allows the logger to acclimate to its environment before recording begins, preventing initial out-of-range readings.
Image: The Frigga M2D data logger connected to a computer, illustrating the software interface used for setting various parameters like temperature units, alarm ranges, and logging intervals.
작동 지침
녹화 시작 및 중지
- 에게 시작 recording, press the 'START/STATUS' button. The device will begin logging data after any configured start delay.
- 에게 멈추다 recording, press the 'STOP' button.
View실시간 데이터 수집
The integrated LCD screen displays real-time temperature readings, alarm status, and statistical information. You can switch between Fahrenheit and Celsius units directly on the device.
LED 알람 표시기
The device features an LED alarm function that activates if the recorded temperature exceeds or falls below the pre-set thresholds configured in the software.
데이터 검색
After recording is complete, plug the USB connector of the data logger into any computer. The device will automatically generate PDF and CSV reports, which can be accessed directly without requiring additional software or driver installation. The PDF report provides a summary and graph, while the CSV file contains raw data points.
Image: The Frigga M2D data logger connected via USB to a computer, demonstrating its ability to auto-generate PDF and CSV reports for data analysis.
유지
배터리 교체
The Frigga M2D uses a CR2450 battery. When the battery indicator shows low power, replace the battery to ensure continuous operation and data integrity. Follow these steps:
- 장치 뒷면에서 배터리함을 찾으세요.
- Use a coin or a flat tool to twist the battery cover counter-clockwise to open.
- 기존 CR2450 배터리를 제거하세요.
- 새 CR2450 배터리를 양극(+)이 위를 향하게 하여 삽입하세요.
- 배터리 덮개를 다시 씌우고 시계 방향으로 돌려 고정하십시오.
Image: A step-by-step visual guide demonstrating the process of replacing the CR2450 battery in the Frigga M2D data logger.
청소
부드러운 천으로 기기를 깨끗하게 닦아주세요.amp cloth. Do not use abrasive cleaners or immerse the device in water, despite its IP65 rating, to prevent damage to the USB port or internal components.
문제 해결
- Device does not start recording immediately: The device has a factory-set 30-minute start delay. Wait for this period to elapse. An hourglass icon and a flashing blue light indicate the delay is active. Ensure the 'Start Delay' setting in the Frigga Data Software is configured as desired.
- Software issues (e.g., blank window, crashes): If the Frigga Data Software does not open correctly (e.g., a blank window appears), try closing the process via Task Manager and restarting the software. Ensure your operating system (Windows/Mac OS) is updated and meets the software's requirements.
- Inaccurate or unexpected readings: Ensure the device has acclimated to the environment before starting a recording session. Verify that the temperature alarm ranges and logging intervals are correctly set in the Frigga Data Software.
- 컴퓨터가 장치를 인식하지 못합니다: Ensure the USB connection is secure. Try plugging the device into a different USB port or another computer.
- 짧은 배터리 수명: The initial battery might have a reduced charge. Replace the CR2450 battery with a new one if you experience unusually short operational periods.
지속적으로 문제가 발생하는 경우 지원 섹션에서 연락처 정보를 확인하세요.
명세서
| 모델 | M2D |
| 측정 범위 | -30°C ~ +70°C (-22°F ~ +158°F) |
| 정확성 | ±0.5°C (-20°C to +40°C); ±1°C for other ranges |
| 메모리 용량 | 14,400개의 독서 |
| 배터리 | CR2450(교체 가능) |
| 연결성 | USB |
| 디스플레이 유형 | 디지털 LCD |
| 방수등급 | IP65 |
| 크기(대략) | 11.2 cm (4.41 in) Height x 4.7 cm (1.85 in) Width |
| 특별 기능 | Alarm, Fast Reading System, High Accuracy, Low Battery Indicator |
Image: A visual representation of the Frigga M2D data logger, highlighting its physical dimensions and core technical specifications.
보증 및 지원
The Frigga M2D data logger comes with a warranty. Details regarding the warranty period and terms can be found on the warranty card included with your product. You can also scan the QR code on the warranty card for access to the user manual and additional resources.
For technical assistance or any inquiries, 24/7 technician support is available via email. Please refer to the contact information provided on the warranty card or the official Frigga web대지.
A calibration certificate can be exported by connecting the device to your computer.
