EXIT EX003

EXIT 20V 3-in-1 Rechargeable LED Lantern EX003 User Manual

모델 : EX003

1. 서론

Thank you for choosing the EXIT 20V 3-in-1 Rechargeable LED Lantern. This versatile lighting solution is designed for various outdoor and emergency scenarios, offering a main lantern, a detachable panel light, and a detachable flashlight. This manual provides essential information for safe and effective use, setup, operation, and maintenance of your device.

2. 안전 정보

3. 제품 오버view

The EXIT 20V 3-in-1 Rechargeable LED Lantern combines three essential lighting tools into one compact unit:

EXIT 3-in-1 LED Lantern showing its three light functions: main lantern, panel light, and flashlight, with lumen outputs.

Figure 3.1: The EXIT 3-in-1 LED Lantern demonstrating its main lantern, panel light, and flashlight functions. The main lantern offers 50-700 lumens, the panel light 10/50/100 lumens, and the flashlight 10/50/120 lumens, all with stepless adjustment for the main lantern.

EXIT 3-in-1 LED Lantern on a table, illustrating how the panel light and flashlight store and charge within the main unit.

Figure 3.2: The EXIT 3-in-1 LED Lantern on a table, highlighting its integrated design where the panel light and flashlight can be stored and charged within the main lantern unit.

4. 설정

4.1. 배터리 설치

The EXIT 20V 3-in-1 LED Lantern uses a 20V 2.0 Ah Lithium-Ion battery. To install the battery:

  1. Locate the battery compartment at the base of the main lantern unit.
  2. 배터리를 배터리 칸에 맞춰 넣고 딸깍 소리가 나면서 제자리에 단단히 고정될 때까지 밀어 넣으세요.

4.2. 초기 충전

Before first use, ensure the battery is fully charged. The 2.0 Ah battery can also function as a power bank.

An EXIT PowerShare Freedom battery being charged via a Type-C cable, with indicators showing charging status and fast charge details.

Figure 4.1: The 2.0 Ah PowerShare Freedom battery being charged via its Type-C port. The battery supports 20V rated voltage and up to 45W fast charge, achieving full charge in approximately 53 minutes with a compatible fast charging adapter and cable.

배터리를 충전하려면:

  1. Remove the 20V 2.0 Ah battery from the main lantern unit.
  2. Connect a Type-C charging cable to the battery's charging port.
  3. Connect the other end of the cable to a suitable power source (e.g., wall adapter, power bank).
  4. The LED indicators on the battery will show the charging status. A full charge typically takes around 53 minutes with a fast charging adapter.

5. 사용 설명서

5.1. 주등 작동

The main lantern features a dial for brightness and color temperature control, and a button for mode selection.

  1. 전원 켜기/끄기: Press the main power button once to turn on the lantern. Press again to cycle through modes or long press to turn off.
  2. 밝기 조정: Rotate the dial to steplessly adjust the brightness from 50 to 700 lumens.
  3. 색온도: Short press the mode button to switch between Warm Light and Cold Light.
  4. 비상등: Long press the mode button to activate the red emergency light, which flashes an S.O.S. signal. Long press again to turn off.
EXIT 3-in-1 LED Lantern demonstrating its three lighting modes: Warm Light, Cold Light, and Emergency Red Light, with brilliance control.

Figure 5.1: The main lantern offers three lighting modes: Warm Light (short press Mode 1), Cold Light (short press Mode 2), and Emergency Light (long press). Brightness is controlled via the brilliance control dial.

5.2. Detachable Panel Light

The panel light is located at the top of the main lantern unit.

  1. 제거: Gently pull the panel light upwards from the main lantern to detach it.
  2. 전원 켜기/끄기: Press the button on the panel light to turn it on/off and cycle through brightness settings (10, 50, 100 lumens).
  3. Re-attachment: Align the panel light with the top of the main lantern and press down until it clicks into place. It will charge automatically when docked and the main lantern has sufficient battery.

5.3. Detachable Flashlight

The flashlight is stored at the base of the main lantern unit.

  1. 제거: Slide the flashlight out from its compartment at the base of the main lantern.
  2. 전원 켜기/끄기: Press the button on the flashlight to turn it on/off and cycle through brightness settings (10, 50, 120 lumens).
  3. Re-attachment: Slide the flashlight back into its compartment at the base of the main lantern. It will charge automatically when docked and the main lantern has sufficient battery.
The EXIT 3-in-1 LED Lantern disassembled, showing the main lantern, detached panel light, and detached flashlight on a table.

Figure 5.2: The main lantern, detached panel light, and detached flashlight displayed on a table, illustrating the modular design.

5.4. 파워뱅크 기능

The 20V 2.0 Ah battery can be used to charge external devices via its USB-C port. Simply connect your device to the battery's USB-C output port using a compatible cable.

6. 유지관리

7. 문제 해결

문제가능한 원인해결책
랜턴이 켜지지 않습니다.배터리가 방전되었거나 제대로 설치되지 않았습니다.배터리가 완전히 충전되었고 올바르게 삽입되었는지 확인하세요.
Panel light or flashlight not charging.Not properly docked or main lantern battery is low.Ensure panel light/flashlight are securely docked. Charge the main lantern's battery.
광 출력이 어둡습니다.밝기 설정이 낮거나 배터리 잔량이 부족합니다.Adjust brightness dial. Recharge the battery.
Red emergency light not working.잘못된 버튼 누름.Long press the mode button to activate the emergency light.

8. 사양

특징세부 사항
모델 번호EX003
제품 치수5"L x 4.3"W x 8.9"H (12.7cm L x 10.9cm W x 22.6cm H)
품목 무게3.65파운드(1.66킬로그램)
배터리 유형20V 2.0 Ah Lithium-Ion (included)
밝기 (메인 랜턴)Up to 800 lumens (stepless adjustment)
Brightness (Panel Light)10 / 50 / 100 lumens
밝기(손전등)10 / 50 / 120 lumens
Runtime (Main Lantern)최대 70시간
Runtime (Panel Light)최대 25시간
Runtime (Flashlight)최대 100시간
방수 레벨방수가 되지 않음
재료플라스틱
전원배터리 구동

9. 보증 및 지원

The EXIT 20V 3-in-1 Rechargeable LED Lantern EX003 comes with a 3-Year Limited Warranty. For warranty claims, technical support, or any inquiries, please contact EXIT customer service.

Please have your model number (EX003) and purchase information ready when contacting support.

관련 문서 - EX003

사전view EXIT Scala Anchor Set and Counterweight Installation Guide
Official installation guide for the EXIT Scala Anchor Set (model 42.90.20.00) and the EXIT Scala Counterweight (model 42.90.60.00), designed for securing outdoor play equipment. Includes parts lists and assembly steps.
사전view EXIT-Adventskalender De intergalactische race Opvulplattegrond
EXIT-Adventskalender의 Gedetailleerde opvulplattegrond: De intergalactische race. Gebruik deze gids om te controleren op ontbrekende onderdelen of verkeerd geplaatste items in je spel. 당신은 당신의 게임에 참여하고 있습니다.
사전view EXIT Aksent Sandpit Assembly Instructions and Parts Guide (Models 200x140, 136x132, 94x77)
Official assembly instructions and parts list for the EXIT Aksent Sandpit series. This guide covers models 200x140, 136x132, and 94x77, providing detailed steps and component identification for safe and easy setup of your EXIT sandpit.
사전view EXIT 마에스트로 축구 골대 사용 설명서
EXIT Maestro 축구 골대의 사용 설명서 및 조립 설명서입니다. 안전 경고, 관리 방법 및 보증 정보가 포함되어 있습니다.
사전view EXIT 수영장 필터 펌프 사용 설명서
EXIT Super Clean 필터 펌프에 대한 포괄적인 사용 설명서로, 다양한 EXIT 수영장 모델에 대한 설치, 작동, 유지관리 및 문제 해결 방법을 자세히 설명합니다.
사전view EU 적합성 선언 - EXIT Elegant Premium Tramp올리
본 문서는 EXIT Elegant Premium 제품에 대한 EU 적합성 선언서입니다.amp네덜란드 토이즈 그룹 BV에서 제조한 이 제품은 관련 EU 안전 법규 및 표준을 준수함을 확인합니다.