1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your XCQQ-S8R Round Bidet Toilet Seat. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. 안전 정보
Observe all safety precautions to prevent injury or damage to the product. This electric bidet is equipped with built-in detection sensors that monitor water temperature, seat temperature, water pressure, and drying level in real-time. In the event of an abnormal situation, the unit will stop working automatically to enhance safety.
- 전원 콘센트가 지정된 용량을 충족하는지 확인하십시오.tage (120 Volts) and has a ground plug.
- 제품을 물에 담그거나 전기 부품에 직접 물을 뿌리지 마십시오.
- Always turn off the water supply and unplug the unit before performing any maintenance or cleaning.
- 작동 중에는 어린이가 제품에 가까이 가지 않도록 하십시오.
3. 패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Bidet toilet seat
- 3-way valve + DMT pipe (Pre-Installed)
- 고정판
- Mounting hardware (rubber expansion nuts, metal adjustment sheets, screws)
- 취급 설명서(본 문서)
4. 제품 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | XCQQ-S8R |
| 모양 | 둥근 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 치수 | 18.9 x 15.4 x 5.5 인치 |
| 품목 무게 | 12.27파운드 |
| 전원 | AC |
| 권tage | 120 볼트 |
| 왓tage | 1300 와트 |
| Temperature Range (Water) | 59 - 95 Degrees Fahrenheit (Adjustable) |
| 최대 중량 용량 | 280 파운드 |
| 특별 기능 | Adjustable water pressure, adjustable heated seat, adjustable water temperature, warm air dryer, soft close toilet lid, LED display screen, nightlight. |
5. 설치 가이드
Before installation, ensure your toilet is compatible with a round bidet seat and that a grounded electrical outlet is available nearby. Refer to the toilet size diagram below to confirm compatibility.
Image: Toilet size compatibility guide for round and elongated seats, indicating an outlet is required.
설치 전 확인:
- Ensure the water supply valve is turned off before starting.
- 패키지 내용물이 모두 있는지 확인하십시오.
설치 단계:
- Insert Expanding Rubber Bolts: Insert the expanding rubber bolts into the toilet holes.
Image: Rubber bolts placed into the toilet seat mounting holes.
- Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
Image: A hand releasing the fixing plate from the bidet seat.
- Secure Fixing Plate: Press the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate to the toilet.
Image: Securing the fixing plate to the toilet using screws.
- 비데 좌석 부착: Push the bidet unit onto the fixing plate while holding down the buckle until the plate slides into the bottom of the unit completely.
Image: Attaching the bidet seat to the fixing plate.
- 물 공급 연결: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the DMT pipe and filter as shown in the video.
Image: Components for water connection, including the 3-way valve and DMT pipe.
- Open Water Supply: Once all connections are secure, slowly open the water supply valve. Wait 3-5 minutes for the bidet to fill with water.
- 플러그인: After the bidet has filled with water, plug the power cord into a grounded electrical outlet.
설치 비디오 가이드:
Video: Official installation guide for the XCQQ Heated Bidet Toilet Seat, demonstrating each step of the setup process.
중요 참고 사항:
When the power is activated, the LED light will start to blink, and the spray bar will automatically extend (without spray) and water will flow down the bar into the toilet. This is the unit performing a water spray check. The blue light will stop blinking in 1 minute automatically.
If the LED light blinks continuously for more than 5 minutes, unplug the bidet and turn off the water valve. Turn on the water valve first, wait 3-5 minutes, then plug it in and do not operate any functions. The blue light will stop blinking in 1 minute automatically.
6. 운영 가이드
The XCQQ-S8R bidet toilet seat features an integrated side control panel and an LED display for easy operation. The unit will remember your customized settings for water pressure, temperature, nozzle position, and heated seat temperature after each adjustment (re-memory required after power outag이자형).
제어판 이상view:
Image: Side control panel with buttons for various bidet functions.
- 스프레이: Activates posterior wash.
- 비데: Activates feminine wash.
- 터보 세척: 더욱 강력한 세척력을 제공합니다.
- 건조: 따뜻한 공기 건조기를 작동시킵니다.
- 자동: Initiates an automatic wash and dry cycle.
- 빛: Controls the night light feature.
- 수온: Adjusts water temperature (5 settings, room temp to 102℉).
- 좌석 온도: Adjusts heated seat temperature (4 settings, room temp to 102℉).
- 노즐 위치: Adjusts the spray nozzle's position.
- 중지: Halts all active functions.
주요 특징:
온수 변기 시트
Image: The bidet seat with a visible warm glow, illustrating the heated seat feature.
Enjoy comfort with 4 adjustable heating levels for the seat, from room temperature up to 102℉.
온풍 건조
Image: The bidet seat's warm air dryer in action, showing air currents.
An efficient air drying system with 5 adjustable temperature settings provides a hands-free experience.
부드럽게 닫히는 뚜껑
Image: The soft-close lid mechanism, preventing loud noises.
The soft damper closing design ensures the lid closes quietly and gently.
Toilet LED Night Light
Image: The bidet's LED night light illuminating the toilet bowl.
Equipped with LED night lights and a beep-off mode to avoid disturbing others at night.
실시간 데이터 표시
Image: The LED display showing real-time data.
The LED screen displays the status of the unit in real-time, including water temperature, seat temperature, and drying temperature.
Multiple Cleaning Styles
Image: Illustrations of various cleaning modes and the stainless steel nozzle.
Features include Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self Cleaning for comprehensive hygiene.
작동 영상 안내:
비디오: 끝view of the XCQQ Heated Bidet Toilet Seat's features and operation, including sensing technology, spray cleaning, warm air drying, heated seat, and night light.
7. 유지관리
Regular cleaning and maintenance will ensure the longevity and optimal performance of your bidet toilet seat.
- 노즐 청소: The bidet features a self-cleaning nozzle. For additional cleaning, gently wipe the nozzle with a soft cloth and mild, non-abrasive cleaner.
- 외부 청소: 비데 시트의 외부 표면을 부드러운 천으로 닦으십시오.amp cloth. Avoid using harsh chemicals, abrasive cleaners, or brushes that could scratch the surface.
- 필터 유지 관리: The DMT pipe includes a filter. Periodically check the filter for debris and clean or replace it as necessary to maintain water flow and quality.
- 전원 차단: Always unplug the unit from the electrical outlet and turn off the water supply before performing any deep cleaning or maintenance.
8. 문제 해결
If you encounter issues with your XCQQ-S8R bidet toilet seat, refer to the following common solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 들어오지 않음/장치가 켜지지 않음 | 전원 코드가 뽑혔고, 차단기가 작동하여 전원이 나갔습니다.tage. | Ensure the power cord is securely plugged in. Check your household circuit breaker. Verify there is no power outage. |
| 물 분사 없음/수압 약함 | 급수 밸브가 닫혀 있고, 정수 필터가 막혔으며, 노즐이 막혔습니다. | Ensure the water supply valve is fully open. Check and clean the water filter. Clean the bidet nozzle. |
| 열선 시트가 따뜻해지지 않음 | Heated seat function not activated, temperature setting too low. | Activate the heated seat function on the control panel. Increase the seat temperature setting. |
| LED light blinking continuously for more than 5 minutes | Initial water fill issue or sensor anomaly. | Unplug the bidet and turn off the water valve. Turn on the water valve first, wait 3-5 minutes for the bidet to fill, then plug it in without operating functions. The light should stop blinking automatically. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
9. 보증 및 지원
For warranty information and customer support, please refer to the contact details provided with your purchase or visit the official XCQQ website. Our customer service team is available to assist you with any questions or concerns regarding your bidet toilet seat.
제조업체: XCQQ
