소개
This manual provides comprehensive instructions for the setup, operation, and maintenance of your HyperX Cloud III Wireless Gaming Headset and HyperX QuadCast S RGB USB Condenser Microphone. This bundle is designed to provide a superior audio experience for gaming, streaming, and communication across various platforms.
Image: The HyperX Cloud III Wireless Headset and HyperX QuadCast S Microphone, shown together as a complete bundle.
패키지 내용
- HyperX Cloud III 무선 게이밍 헤드셋
- Detachable Microphone for Cloud III
- USB 무선 동글
- USB-C 충전 케이블
- HyperX QuadCast S RGB USB Condenser Microphone
- USB Cable for QuadCast S
- Mount Adapter for QuadCast S (3/8” and 5/8” thread sizes)
- 빠른 시작 가이드(본 설명서)
설정
HyperX Cloud III Wireless Headset Setup
- 헤드셋 충전: Connect the USB-C charging cable to the headset's charging port and to a powered USB port. The LED indicator will show charging status. A full charge takes approximately 4.5 hours.
- 장치에 연결:
- Insert the USB wireless dongle into an available USB port on your PC, PS5, PS4, or Nintendo Switch.
- Power on the headset by pressing and holding the power button. The headset will automatically connect to the dongle.
- For mobile devices, ensure your device supports USB-C audio output or use an appropriate adapter if needed.
- 마이크 부착: Insert the detachable 10mm microphone into the microphone jack on the headset. Ensure it is securely seated.
이미지: 클로즈업 view of the HyperX Cloud III Wireless Headset, highlighting the earcups and the detachable microphone.
HyperX QuadCast S Microphone Setup
- 놓기: Place the QuadCast S microphone on a stable, flat surface using its integrated stand, or attach it to a compatible boom arm using the included mount adapter.
- 장치에 연결: Connect the USB cable from the QuadCast S microphone to an available USB port on your PC, PS4, PS5, or Mac. The microphone will be automatically recognized by most operating systems.
- 소프트웨어 설치(선택 사항이지만 권장): For full customization of RGB lighting and other settings, download and install the HyperX NGENUITY software from the official HyperX web대지.
이미지: 자세한 view of the HyperX QuadCast S RGB USB Condenser Microphone, showcasing its design and integrated shock mount.
작동 지침
HyperX Cloud III Wireless Headset Operation
- 전원 켜기/끄기: Press and hold the power button on the earcup to turn the headset on or off.
- 볼륨 조절: Use the volume wheel located on the earcup to adjust audio output levels.
- 마이크 음소거: Press the microphone mute button on the earcup to mute or unmute the microphone. An LED indicator on the microphone will show its status.
- 배터리 수명: The headset offers up to 120 hours of battery life on a single charge. Monitor battery status via the headset's LED indicator or HyperX NGENUITY software.
- DTS Headphone:X Spatial Audio: Activate and configure DTS Headphone:X Spatial Audio through the HyperX NGENUITY software for enhanced sound localization.
Image: A person wearing the HyperX Cloud III Wireless Headset, illustrating the long battery life and 2.4GHz wireless connectivity for extended gaming sessions.
Image: A person comfortably wearing the HyperX Cloud III Wireless Headset, emphasizing the comfort provided by HyperX signature memory foam and premium leatherette.
HyperX QuadCast S Microphone Operation
- 탭하여 음소거: Tap the top of the microphone to instantly mute or unmute. The LED indicator will change to show the microphone's status (on/off).
- 게인 컨트롤 : Use the gain control dial at the bottom of the microphone to adjust input sensitivity.
- 극지 패턴 : Select from four polar patterns (Stereo, Omnidirectional, Cardioid, Bidirectional) using the dial on the back of the microphone to optimize for different recording situations.
- RGB 조명: Customize the dynamic RGB lighting effects using the HyperX NGENUITY software.
- 헤드폰 잭: Use the 3.5mm headphone jack on the back of the microphone for real-time monitoring of your audio.
Image: The HyperX QuadCast S Microphone demonstrating its tap-to-mute sensor with an LED status indicator, showing both active and muted states.
Image: The HyperX QuadCast S Microphone displayed alongside a computer screen showing the HyperX NGENUITY software interface, illustrating customization options for RGB lighting and effects.
유지
- 청소: Use a soft, dry cloth to clean the surfaces of the headset and microphone. Avoid using harsh chemicals or abrasive materials.
- 저장: 기기를 직사광선과 극한의 온도를 피해 서늘하고 건조한 곳에 보관하세요.
- 케이블 관리: 손상을 방지하려면 USB 케이블이 날카롭게 구부러지거나 꼬이지 않도록 하세요.
- 귀 쿠션: The ear cushions are designed for durability, but gentle cleaning can extend their lifespan.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 헤드셋에서 소리가 나지 않음 | Headset not powered on; Dongle not connected; Low battery; Incorrect audio output selected. | Ensure headset is powered on and charged. Verify USB dongle is securely connected. Check audio output settings on your device. |
| Microphone not working (headset) | 마이크가 음소거되었습니다. 제대로 연결되지 않았습니다. 잘못된 입력 장치가 선택되었습니다. | Press the mute button to unmute. Re-attach the microphone firmly. Select the headset microphone as the input device in your system settings. |
| QuadCast S microphone not detected | USB cable loose or faulty; Incorrect input device selected; Driver issue. | Ensure USB cable is securely connected. Try a different USB port. Check system sound settings to select QuadCast S as input. Reinstall HyperX NGENUITY software if necessary. |
| Poor audio quality (QuadCast S) | Incorrect polar pattern; Gain too high/low; Environmental noise. | Adjust the polar pattern to suit your recording environment. Adjust the gain control dial. Ensure you are speaking directly into the correct side of the microphone for the selected pattern. |
| RGB lighting not working (QuadCast S) | NGENUITY software not running; Software settings incorrect. | Ensure HyperX NGENUITY software is installed and running. Check lighting settings within the software. |
명세서
HyperX 클라우드 III 무선 헤드셋
- 모델 이름: 클라우드 III
- 연결성: 2.4GHz 무선(RF)
- 운전자: 53mm Angled Dynamic Drivers
- 주파수 응답: 10Hz-21kHz
- 배터리 수명: 최대 120시간
- 충전 시간: 약 4.5시간
- 재료: Memory foam, Leatherette
- 마이크로폰: Detachable 10mm Noise-Cancelling
- 제어 유형: Volume Control, Mic Mute
- 호환 장치: PC, PS5, PS4, Nintendo Switch, Mobile
HyperX QuadCast S RGB USB Condenser Microphone
- 유형: USB 콘덴서 마이크
- 극지 패턴 : 스테레오, 무지향성, 단일지향성, 양방향
- 특징: Anti-vibration shock mount, Built-in pop filter, Tap-to-mute sensor with LED indicator, Gain control dial, RGB lighting (customizable via NGENUITY)
- 헤드폰 출력: 3.5mm jack for real-time monitoring
- Mount Adapter: Compatible with 3/8” and 5/8” thread sizes
- 호환 장치: PC, PS4, PS5, Mac
보증 및 지원
HyperX products are backed by a limited warranty. For detailed warranty information, technical support, and customer service, please visit the official HyperX web해당 웹사이트를 방문하거나 고객 지원팀에 문의하십시오. 보증 청구를 위해 구매 증빙 자료를 보관하십시오.
추가 지원을 받으려면 다음을 방문하세요. www.hyperx.com/support
