1. 서론
This instruction manual provides comprehensive guidance for the safe and efficient operation, installation, maintenance, and troubleshooting of your PAKROMAN Commercial Ice Maker, Model FASK39C. Please read this manual thoroughly before operating the appliance and retain it for future reference.
Figure 1.1: PAKROMAN Commercial Ice Maker Model FASK39C and included accessories.
2. 안전 정보
부상이나 기기 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 제빙기가 올바른 전압으로 접지된 전원 콘센트에 연결되어 있는지 확인하십시오.tage.
- 손상된 전원 코드나 플러그로 제품을 작동하지 마십시오.
- 통풍구에 장애물이 없도록 깨끗이 유지하세요.
- 인화성 추진제가 들어 있는 에어로졸 캔 등 폭발성 물질을 이 기기에 보관하지 마십시오.
- Only qualified personnel should perform repairs or servicing.
- 청소 또는 유지 관리를 수행하기 전에 전원 공급 장치를 분리하십시오.
- 이 기기는 상업용으로 설계되었습니다.
3. 상자 안에 무엇이 들어있나요?
포장을 풀 때 모든 구성품이 들어 있는지 확인하세요.
- 상업용 제빙기
- 얼음 국자
- 정수 필터
- 물 유입 호스
- 배수 호스
- 호스 CLamps
- 사용 설명서
4. 제품 특징
The PAKROMAN Commercial Ice Maker FASK39C is engineered for high performance and reliability:
- 컴팩트한 디자인: Designed to fit comfortably under most counters, with a width of 14.8 inches, ideal for space-limited establishments.
- High Ice Production & Storage: Capable of producing up to 90 pounds of bullet ice per 24 hours, with a storage bin capacity of up to 35 pounds, ensuring a continuous supply of ice.
- Bullet Ice: Produces bullet-shaped ice cubes that are approximately 2 times larger than standard cube ice. This ice cools beverages quickly and is easy to chew, suitable for cocktails and bagged ice.
- 공랭식 시스템: Features an efficient air-cooled system that conserves water while maintaining optimal ice-making performance.
- 인증: Energy Star certified for energy efficiency and ETL certified for sanitation standards, ensuring high quality and safety.
Figure 4.1: Comparison illustrating the larger size and transparency of PAKROMAN bullet ice compared to standard cube ice.
Figure 4.2: Detail of bullet ice dimensions, showing 1 1/2 inch length and 1 1/10 inch width.
5. 설정 및 설치
Proper installation is crucial for the performance and longevity of your ice maker. Follow these steps carefully:
- 짐 풀기: 제빙기를 포장에서 조심스럽게 꺼내세요. 배송 중 손상된 부분이 있는지 확인하세요.
- 놓기: Position the ice maker on a flat, stable surface. Ensure adequate clearance around the unit for proper air circulation, especially at the rear and sides where ventilation grilles are located.
- 물 연결: Connect the water inlet hose to a potable water supply. Install the included water filter in line with the water supply to ensure clean ice production. Connect the other end of the water inlet hose to the designated water inlet on the back of the ice maker.
- 드레인 연결: Connect the drain hose to the water outlet (pre-installed) on the back of the unit. Route the drain hose to a suitable floor drain or sink, ensuring a continuous downward slope for proper drainage.
- 전원 연결: Plug the power cord into a dedicated, grounded electrical outlet. Ensure the voltage는 기기의 요구 사항과 일치합니다.
그림 5.1: 후면 view of the ice maker, highlighting the power cord, water inlet, and pre-installed water outlet for fast installation.
6. 사용 설명서
Familiarize yourself with the control panel for efficient operation.
Figure 6.1: Straightforward control panel with four operation buttons: Power (⏻), Self-cleaning (Ὣf;), Adjust data +, and Adjust data -.
6.1 초기 시작
- 물과 전원을 연결한 후, 버튼을 누르십시오. 힘 버튼(⏻)을 눌러 장치를 켜세요.
- The machine will automatically begin the ice-making cycle. The display will show the current status and time.
6.2 얼음 생산
The ice maker produces up to 90 pounds of bullet ice per 24 hours. Each ice-making cycle typically takes 11-18 minutes. The storage bin can hold up to 35 pounds of ice. The machine will automatically stop when the ice bin is full and resume when ice is removed.
6.3 설정 조정
사용하세요 + 그리고 - buttons to adjust default data or settings as indicated on the control panel display. Refer to the display icons for specific adjustments such as ice thickness or cycle duration, if applicable.
6.4 자체 세척 기능
To initiate the self-cleaning cycle, press the 자체 세척 버튼(🚿). Follow any on-screen prompts. This function helps maintain hygiene and efficiency.
7. 유지관리 및 청소
정기적인 유지보수는 최적의 성능을 보장하고 제빙기의 수명을 연장시켜 줍니다.
7.1 일일 청소
- 부드러운 천으로 장치 외부를 닦아주세요.amp 옷감.
- Clean the ice storage bin with a mild detergent and rinse thoroughly.
- Ensure the ice scoop is clean before use.
7.2 주간/격주 청소
- Run the self-cleaning cycle as described in Section 6.4.
- Inspect and clean the air filter located on the front grille. Remove the filter and wash it with warm, soapy water. Allow it to dry completely before reinserting.
그림 7.1: 청소를 위해 공기 필터를 분리하는 모습.
7.3 월별/분기별 유지 관리
- 정수 필터 교체: Replace the water filter every 3-6 months, or more frequently depending on water quality and usage, to ensure optimal ice quality and prevent scale buildup.
- 응축기 코일 청소: Periodically clean the condenser coils at the back of the unit using a brush or vacuum cleaner to remove dust and debris. This improves efficiency and prevents overheating.
- Drain System Check: Ensure the drain hose is free of kinks and blockages. Clean the drain pan if necessary.
Figure 7.2: Internal water pump component, which should be checked for cleanliness during maintenance.
Figure 7.3: The compressor unit, a key component for ice production, requires proper ventilation and occasional inspection.
8. 문제 해결
일반적인 문제와 해결 방법은 이 섹션을 참조하세요. 문제가 지속되면 고객 지원팀에 문의하세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 제빙기에서 얼음이 나오지 않습니다. | No water supply; clogged water filter; power issue; high ambient temperature. | Check water connection and supply valve; replace water filter; ensure power cord is securely plugged in; move unit to a cooler environment. |
| 얼음 생산이 느립니다. | Dirty condenser coils; high ambient temperature; low water pressure. | Clean condenser coils; ensure proper ventilation; check water supply pressure. |
| 얼음 조각은 작거나 속이 비어 있습니다. | Low water flow; dirty evaporator; water quality issues. | Check water supply and filter; clean the evaporator plate; consider water treatment if water quality is poor. |
| 장치에서 물이 새고 있습니다. | Loose drain hose connection; clogged drain; damaged water line. | Secure drain hose connections; clear any drain blockages; inspect water lines for damage. |
| 작동 중 비정상적인 소음이 발생합니다. | 느슨한 구성 요소, 팬 막힘, 압축기 문제. | Check for loose parts; ensure fan is clear; if compressor noise persists, contact service. |
9. 사양
Key technical specifications for the PAKROMAN Commercial Ice Maker FASK39C:
| 기인하다 | 값 |
|---|---|
| 모델 번호 | FASK39C |
| 상표 | 파크로맨 |
| 제품 크기(D x W x H) | 13인치 깊이 x 14.8인치 너비 x 25인치 높이 |
| 얼음 생산 용량 | 최대 90파운드/24시간 |
| 얼음 저장 용량 | 최대 35파운드 |
| 왓tage | 380 와트 |
| 얼음 타입 | Bullet Ice (approx. 1.5" x 1.1") |
| 냉각 시스템 | 공랭식 |
| 인증 | 에너지 스타, ETL 인증 |
| 첫 번째 가능한 날짜 | 30년 2024월 XNUMX일 |
그림 9.1: 차원view of the PAKROMAN Commercial Ice Maker.
10. 보증 및 지원
For warranty information or technical support, please contact PAKROMAN customer service. Keep your purchase receipt and model number handy for faster service.
You can visit the official PAKROMAN store for more information and support: PAKROMAN Store on Amazon.
