소개
This manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your MOUNTUP Electric Height Adjustable Standing Desk (Model UP512-B3). Please read this manual thoroughly before assembly and use to ensure safe and efficient operation. Keep this manual for future reference.
중요한 안전 정보
Do not exceed the weight limit of 176 pounds. Ensure the desk is fully assembled and stable before use. Keep the desk away from the edge of the floor to prevent tipping.
- Always ensure the desk is on a level surface.
- 작동 중에는 어린이와 애완동물이 책상에 접근하지 못하도록 하세요.
- 움직이는 부품 근처에 손이나 다른 물건을 두지 마십시오.
- 청소 또는 유지 보수 전에 전원을 차단하십시오.
- Only use the desk for its intended purpose.
패키지 내용
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact MOUNTUP customer support.
Figure 1: Standing Desk Part List. This image displays all the individual components included in the package, laid out on a mat, ready for assembly. It shows the two-piece desktop, the metal frame components, the motor, the control panel, and various hardware such as screws and tools.
구성 요소 목록:
- Desktop (2 sections)
- 책상 다리 (2)
- 가로대/프레임 구성 요소
- 모터
- LED 디스플레이가 있는 제어판
- 헤드폰 후크
- 키보드 트레이
- 전원 어댑터 및 케이블
- 조립 하드웨어(나사, 볼트, 도구)
- 미끄럼 방지 발 패드
- Optional Lockable Casters
- 케이블 관리 그로밋(2)
설정 및 조립
The MOUNTUP Electric Height Adjustable Standing Desk is designed for quick and easy assembly, typically within 30 minutes. Follow these steps carefully:
- 부품 풀기 및 식별: Lay out all components on a clean, flat surface, referring to the "Package Contents" section and Figure 1 to identify each part.
- 데스크톱 조립: The desktop comes in two sections. Align and secure these sections using the provided screws and accessories. Ensure the seam is tight and flush.
- 책상에 다리를 부착하세요: Securely attach the desk legs to the underside of the assembled desktop using the designated mounting points and hardware.
- Install Crossbar and Motor: Connect the crossbar between the two legs. Install the electric motor and connect it to the leg mechanisms as per the detailed diagrams in the included installation guide.
- 마운트 제어판: Attach the control panel to the underside of the desktop in an easily accessible location. Connect its cable to the motor/power unit.
- 액세서리 설치:
- 헤드폰 걸이: Attach the two headphone hooks to the side of the desk frame.
- 케이블 관리 : Utilize the two cable management grommets on the desktop to route and organize your wires, keeping the workspace tidy.
- Choose Base Option: Decide between the non-slip foot pads for stationary use or the lockable casters for easy mobility. Attach your preferred option to the bottom of the desk legs.
Figure 2: Base Options. This image illustrates the choice between non-slip foot pads for stability and lockable casters for mobility, allowing users to customize their desk setup.
- 전원 연결: Plug the power adapter into the desk's control unit and then into a standard electrical outlet.
Figure 3: Assembled Desk. This image shows the MOUNTUP Electric Height Adjustable Standing Desk fully assembled and set up in a workspace, demonstrating its spacious desktop and integrated features.
작동 지침
Your MOUNTUP standing desk features an intelligent control panel for easy height adjustment and memory functions.
Figure 4: Programmable Control Panel. This image provides a detailed view of the desk's control panel, highlighting the LED display for current height, memory preset buttons, and up/down adjustment controls.
제어판 기능:
- LED 디스플레이: 책상의 현재 높이를 인치 단위로 표시합니다.
- 위/아래 화살표(∧/∨): Press and hold to continuously adjust the desk height. Release to stop at your desired position. The desk can be adjusted from 28.7 inches to 46.5 inches.
Figure 5: Height Adjustment Range. This image visually demonstrates the desk's adjustable height range, from its lowest point suitable for sitting to its highest point for standing, accommodating various user preferences.
- 메모리 사전 설정(1, 2, 3, 4):
- 사전 설정하기: Adjust the desk to your desired height. Press the "M" button (or similar memory set button, if present, otherwise assume direct press of 1-4 after setting height) followed by the desired number button (1, 2, 3, or 4). The display may flash to confirm the setting.
- 사전 설정 불러오기: Simply press the corresponding number button (1, 2, 3, or 4) to automatically move the desk to the saved height.
The durable quiet motor ensures smooth and reliable height adjustments, tested for over 20,000 cycles with a full load capacity of 176 lbs.
Figure 6: Durable Lifting Capacity. This image highlights the desk's robust construction and motor, capable of lifting up to 176 pounds and tested for over 20,000 lifting cycles, ensuring long-term reliability.
유지
Regular maintenance will ensure the longevity and optimal performance of your MOUNTUP standing desk.
- 청소: 데스크탑과 프레임은 부드러운 천으로 닦아주세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 강한 화학 물질은 피하세요.
- 케이블 관리 : Periodically check and organize cables to prevent tangling or damage, especially during height adjustments.
- 패스너 점검: Every few months, inspect all screws and bolts to ensure they are tight. Retighten if necessary.
- 모터 케어: The motor is designed for durability. Avoid overloading the desk beyond its 176 lbs capacity.
문제 해결
If you encounter issues with your MOUNTUP Electric Height Adjustable Standing Desk, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 책상이 움직이지 않고 제어에 반응하지 않습니다. | 전원이 들어오지 않고, 연결이 느슨하고, 모터에 오류가 있습니다. |
|
| Desk moves erratically or stops during adjustment. | Overload, obstruction, sensor issue, motor calibration. |
|
| 책상이 작동 중에 이상한 소음을 냅니다. | 부품이 헐거워졌거나 모터에 문제가 있는 것 같습니다. |
|
If the problem persists after attempting these solutions, please contact MOUNTUP customer support for further assistance.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | UP512-B3 |
| 제품 크기(D x W x H) | 24인치 깊이 x 55인치 너비 x 46.5인치 높이 |
| 높이 조절 범위 | 28.7인치에서 46.5인치까지 |
| 최대 중량 용량 | 176파운드(80kg) |
| 데스크탑 소재 | Engineered Wood (Rustic Brown finish) |
| 프레임 소재 | Metal (Powder Coated finish) |
| 품목 무게 | 20.4킬로그램(약 45파운드) |
| Motor Durability | Tested for over 20,000 cycles |
| 특별 기능 | Memory Controller, Headphone Hook, Keyboard Tray, Optional Casters, Cable Management Grommets |
| 조립이 필요합니다 | 예 (도구 포함) |
보증 및 지원
Your MOUNTUP Electric Height Adjustable Standing Desk comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms and conditions.
For technical support, missing parts, or warranty claims, please contact MOUNTUP customer service through the following channels:
- 온라인 지원: Visit the official MOUNTUP website (link not provided in input, so generic advice).
- 이메일 지원: Refer to your product packaging or included documentation for contact email.
- 보호 계획: Extended protection plans are available for purchase separately, offering additional coverage beyond the standard warranty. These plans typically cover 2-year or 3-year periods.
When contacting support, please have your product model number (UP512-B3) and purchase information readily available.
