1. 서론
This manual provides detailed instructions for the safe and efficient operation of your ATOMSTACK A12 Pro Laser Engraving Machine. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
안전 경고:
- Always wear UV-filtering eye protection when operating the laser engraver.
- 조각/절단 과정에서 발생하는 연기와 증기를 배출하기 위해 적절한 환기 시설을 확보하십시오.
- 작동 중에 기계를 무인 상태로 두지 마십시오.
- 작업 구역 근처에 가연성 물질을 두지 마세요.
- 비상 정지 버튼의 위치를 숙지하십시오.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
Figure 2.1: ATOMSTACK A12 Pro Laser Engraving Machine and included accessories.
- ATOMSTACK A12 Pro Laser Engraving Machine (Unibody Frame)
- 레이저 헤드
- 전원 어댑터(24V, 5A)
- 전원 케이블
- USB 케이블(C형)
- Goggles (UV-filtering eye protection)
- Fixed Focus Lens
- 사용자 설명서
- Tools (H3 hexagon L-shaped wrench, M4 thumb screws)
- 플래시 드라이브
- 와이파이 안테나
- Silicone Hose (air hose)
- Wire Anchor
- 케이블 CLamp
- 100*30 lint free cloth
- 슬라이더
- 스위치 키
3. 설정 가이드
The ATOMSTACK A12 Pro features an unibody design for minimal assembly. Follow these steps to get started:
- 언박싱: Carefully remove the machine and all accessories from the packaging. The machine is pre-calibrated and shipped as a single unit.
Figure 3.1: The ATOMSTACK A12 Pro is ready to use right out of the box with its unibody design.
- 슬라이더를 설치하세요: Attach the slider component to the designated rail on the machine. Secure it with the provided screws.
- 레이저 헤드를 설치하십시오: Mount the laser head onto the slider. Ensure it is firmly attached.
- 와이파이 안테나를 설치하세요: Screw the WiFi antenna into its port on the machine's side.
- 튜빙 및 X축 연결 라인 설치: Connect the tubing and X-axis link lines as shown in the diagram to ensure proper cable management and operation.
- 전원 및 USB 연결: Plug the power adapter into the machine and a power outlet. Connect the USB cable from the machine to your computer.
- 전원 켜기: Insert the switch key and turn it to the ON position. The machine is now ready for software setup.
Video 3.1: A detailed guide on how to install and set up the ATOMSTACK laser engraver.
4. 사용 설명서
4.1 소프트웨어 제어
The ATOMSTACK A12 Pro supports multiple control methods:
- ATOMSTACK PC Software: Exclusive software for simplified operation, ideal for beginners.
- LightBurn 및 LaserGRBL: Traditional PC software for advanced users.
- ATOMSTACK Mobile APP: Available on Android and Apple App Stores for WiFi control via smartphone.
그림 4.1: 이상view of the various software and app control options for the laser engraver.
4.2 조각 과정
- 재료 배치: Place your material flat on the engraving bed.
- 초점 조정: Use the fixed-focus design for rapid and precise focusing in approximately 10 seconds.
- Cross Positioning: Utilize the newly added cross laser positioning feature for clear visibility of the laser's location, ensuring perfect alignment for engraving and easy horizontal adjustment.
- 소프트웨어 설정: Adjust engraving parameters (speed, power, passes) in your chosen software based on the material.
- 조각 시작: 소프트웨어에서 조각 공정을 시작하십시오.
Figure 4.2: The cross positioning system helps align objects and lock to edges for precise horizontal carving.
5. 특징 및 기능
- 유니바디 디자인: Sturdy all-aluminum unibody design, installation-free and pre-calibrated.
- High Speed & Precision: New dual-axis linear guide rail structure and high-speed motherboard allow engraving speeds up to 600mm/s, 3-6 times faster than traditional frame machines. Accuracy within 0.004 inches.
- 강력한 레이저: 12000mW diode laser (Laser Class 4) with 50W machine power and a 0.05*0.06mm ultra-fine laser spot focus.
- Thicker Cuts: Can cut through 8mm wood, 5mm black acrylic, and 0.02mm stainless steel in a single pass.
- Diverse Material Compatibility: Engraves and cuts a wide range of materials including wood, acrylic, metal, glass, ceramics, leather, paper, cardboard, and more.
- Automatic Power Failure Recovery: Memorizes engraving position and swiftly resumes from the paused point, ensuring uninterrupted production and material saving.
- 강화된 보안: Equipped with 4-way limit switches, UV-filtering eye protection, a tilt detector with a 15-degree alarm, and an emergency stop button.
Figure 5.1: Comparison showing the significantly faster engraving speed of the A12 Pro.
Figure 5.2: Demonstrates the maximum cutting thickness for various materials with the A12 Pro.
그림 5.3: 예amples of various materials that can be engraved or cut by the machine.
6. 유지관리
- 렌즈 세척: Regularly clean the laser lens with the provided lint-free cloth to maintain optimal performance and prevent residue buildup.
- 철도 윤활: 레이저 헤드의 원활한 움직임을 위해 가이드 레일에 주기적으로 소량의 윤활유를 도포하십시오.
- 파편 제거: Keep the engraving bed and surrounding area free of debris and dust. Use an air compressor or brush to clear away small particles.
- 펌웨어 업데이트: ATOMSTACK 공식 페이지를 확인하세요. website periodically for firmware updates to ensure your machine has the latest features and bug fixes.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계 전원이 켜지지 않습니다 | Power cable loose; Emergency stop engaged; Key not turned. | Check power connections; Disengage emergency stop; Turn key to ON. |
| 레이저가 발사되지 않음/출력이 약함 | Lens dirty; Incorrect focus; Low power setting in software. | Clean laser lens; Adjust focus; Increase power setting. |
| Engraving is distorted/inaccurate | Loose belts/rails; Material shifting; Incorrect software settings. | Check and tighten belts/rails; Secure material; Verify software settings. |
| 소프트웨어가 기계에 연결되지 않음 | USB cable issue; Driver not installed; Incorrect COM port. | Try different USB port/cable; Install drivers; Select correct COM port in software. |
8. 사양
- 제품 크기: 23.22 x 23.22 x 7.08 인치
- 품목 무게: 18.74파운드
- 레이저 출력 전력: 12000mW (12W)
- 기계 전원: 50와트
- 레이저 스팟 크기: 0.05*0.06mm
- 조각 속도: 최대 600mm/s
- 정확성: 0.004인치 이내
- 연결성: USB, WiFi (via Mobile APP)
- 지원 소프트웨어: ATOMSTACK PC Software, LightBurn, LaserGRBL
- 제조업체: 심천 AtomStack 기술 유한 회사
- 원산지: 중국
9. 보증 및 지원
Your ATOMSTACK A12 Pro Laser Engraving Machine comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official ATOMSTACK web대지.
Our professional technical and support teams are available 24/7 to answer any questions or concerns you may have.
