1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your G.SKILL MD1 Mid-Tower ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the lifespan of your components.
The G.SKILL MD1 is designed for compatibility with ATX, mATX, and mini-ITX motherboards, offering a versatile foundation for various PC builds. It features a 4mm tempered glass side panel and front/top mesh panels for optimal airflow and component visibility.
2. 제품 특징
- ATX PC Case: Compatible with ATX, mATX, and mini-ITX motherboard sizes.
- 강화 유리 측면 패널: 4mm thick tempered glass for clear internal component visibility.
- Front/Top Mesh Design: Engineered for enhanced airflow and cooling performance.
- 라디에이터 지원 : Supports up to a 360mm AIO radiator for advanced cooling solutions.
- GPU Length Support: 최대 길이 404mm의 그래픽 카드를 지원합니다.
- 저장 드라이브 베이: Includes 2x 2.5" bays and 2x 3.5" bays for amp르 스토리지.
- Tool-less Side Panel: Hinge design for easy access and maintenance.
- 전면 패널 I/O: 2x USB 3.0, 1x USB Type-C, 1x Audio-Out, 1x Mic-In for convenient connectivity.
3. 패키지 내용
아래 나열된 모든 구성품이 패키지에 들어 있는지 확인하세요.
- G.SKILL MD1 Mid-Tower ATX PC Case
- 부속품 상자 (나사, 케이블 타이, 스탠드오프)
- 사용 설명서 (본 문서)
4. 설정 및 설치
4.1. 사건 준비
Before installing components, ensure the case is placed on a stable, flat surface. Remove the tempered glass side panel by gently pulling it open from the rear hinge, then lifting it off. The opposite side panel can be removed by unscrewing the thumb screws at the rear and sliding the panel backward.
그림 1: 폭발 view showing the removal of the front panel, top panel, and side panels.
4.2. 마더보드 설치
Install the appropriate standoffs for your motherboard size (ATX, mATX, or mini-ITX). Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws. Ensure the I/O shield is properly seated before installing the motherboard.
Figure 2: Main internal compartment of the G.SKILL MD1 case, illustrating the motherboard mounting area.
4.3. 저장 드라이브 설치
The case supports 2x 2.5" drives and 2x 3.5" drives. Locate the drive bays and secure your SSDs or HDDs using the provided screws. Ensure proper cable management for power and data connections.
그림 3: 후면 내부 view of the G.SKILL MD1 case, highlighting the 2.5" and 3.5" drive bays behind the motherboard tray.
4.4. 그래픽 카드(GPU) 설치
Install your graphics card into the appropriate PCIe slot on your motherboard. The case supports GPUs up to 404mm in length. Secure the GPU with the retention clip and any necessary screws. An included GPU support bracket can be used to prevent sag for longer cards.
그림 4: 내부 view of the G.SKILL MD1 case with a graphics card installed, demonstrating the use of the GPU support bracket.
4.5. 전면 패널 I/O 연결
Connect the front panel cables (USB 3.0, USB Type-C, Audio-Out, Mic-In, Power, Reset) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.
Figure 5: Close-up of the G.SKILL MD1 case's front panel I/O, showing USB 3.0, USB Type-C, Audio-Out, Mic-In, Power, and Reset buttons.
5. 사용 설명서
Once all components are securely installed and connected, replace the side panels. Connect your power supply to a wall outlet and press the power button on the front panel to start your system.
그림 6: 전면 view of the G.SKILL MD1 case, showcasing the mesh panel and G.SKILL branding.
6. 유지관리
Regular maintenance helps ensure optimal performance and longevity of your PC components. The G.SKILL MD1 case features mesh panels that act as dust filters.
6.1. 먼지 필터 청소
Periodically clean the front and top mesh panels to prevent dust buildup, which can restrict airflow and lead to overheating. These panels can be removed for easy cleaning with compressed air or a soft brush.
6.2. 내부 청소
With the side panels removed, use compressed air to clear dust from internal components such as CPU coolers, GPU fans, and power supply vents. Ensure the system is powered off and unplugged before performing any interior cleaning.
7. 문제 해결
If you encounter issues with your PC build within the G.SKILL MD1 case, consider the following common troubleshooting steps:
- 시스템 전원이 켜지지 않음:
- 24핀 ATX, 8핀 CPU, GPU 전원 케이블을 포함한 모든 전원 연결을 확인하세요.
- 전원 공급 스위치가 'ON' 위치에 있는지 확인하세요.
- 전면 패널 전원 버튼이 마더보드에 제대로 연결되어 있는지 확인하십시오.
- 과열된 구성 요소:
- 먼지 필터와 내부 부품을 청소합니다.
- Ensure case fans are properly installed and functioning, directing airflow efficiently.
- Verify CPU cooler and GPU cooler are correctly seated and making good contact.
- 디스플레이 출력 없음:
- Ensure the monitor cable is connected to the graphics card, not the motherboard (if a dedicated GPU is installed).
- 그래픽 카드와 RAM 모듈을 다시 장착하세요.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 지스킬 |
| 모델 번호 | GC-AWGW1-MD1 |
| 케이스 유형 | 미드 타워 |
| 마더보드 호환성 | ATX, mATX, mini-ITX |
| 사이드 패널 | 4mm Tempered Glass (Hinged) |
| 전면 패널 | 메쉬 디자인 |
| 상단 패널 | 메쉬 디자인 |
| 최대 GPU 길이 | 404mm |
| 라디에이터 지원 | Up to 360mm (AIO) |
| 2.5인치 드라이브 베이 | 2 |
| 3.5인치 드라이브 베이 | 2 |
| 전면 I / O 포트 | 2x USB 3.0, 1x USB Type-C, 1x Audio-Out, 1x Mic-In |
| 치수(길이x너비x높이) | 19.84 x 8.7 x 17.7 인치 |
| 품목 무게 | 19.91파운드(9.05kg) |
Figure 7: Diagram illustrating the dimensions of the G.SKILL MD1 Mid-Tower ATX PC Case.
9. 보증 및 지원
For warranty information and technical support, please refer to the official G.SKILL web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
G.SKILL Official Web대지: www.gskill.com
