매뉴얼+

RUPES LHR21

RUPES DA LHR21 Blue Coarse Pad (180mm)

사용 설명서

1. 서론

The RUPES DA LHR21 Blue Coarse Pad (180mm) is an advanced foam polishing pad specifically engineered for use with random orbital/dual action polishers and gear-driven tools. This pad is designed to effectively remove mild to severe defects from various paint systems, providing improved cutting and finishing capabilities when paired with the RUPES DA Coarse Compound. Its unique open-cell foam material combines the best characteristics of previous RUPES blue and green foam pads, offering enhanced durability and performance.

RUPES DA LHR21 Blue Coarse Pad (180mm) on a white background

Image 1.1: The RUPES DA LHR21 Blue Coarse Pad (180mm). This image displays the blue foam pad, highlighting its texture and size, ready for attachment to a polishing machine.

2. 설정

Proper setup is crucial for safe and effective operation of the RUPES DA LHR21 Blue Coarse Pad. Follow these steps to prepare your polishing system:

  1. 패드를 점검하세요: Before each use, visually inspect the pad for any signs of damage, tears, or excessive wear. Ensure the hook-and-loop backing is clean and free of debris.
  2. 깨끗한 백킹 플레이트: Ensure the backing plate of your random orbital or gear-driven polisher is clean and free of dust or compound residue.
  3. 패드 부착: Align the center of the RUPES DA LHR21 Blue Coarse Pad with the center of your polisher's backing plate. Press firmly to ensure the hook-and-loop attachment is secure across the entire surface of the pad.
  4. 첨부파일을 확인하십시오: Gently tug on the edges of the pad to confirm it is securely attached and will not detach during operation.
RUPES DA LHR21 Blue Coarse Pad attached to a polisher backing plate

Image 2.1: Proper attachment of the RUPES DA LHR21 Blue Coarse Pad to a polisher's backing plate. The pad is centered and fully engaged with the hook-and-loop system.

3. 사용 설명서

For optimal results and to prevent damage to the paint surface, adhere to the following operating guidelines:

  1. 표면 준비: Ensure the vehicle's paint surface is clean, dry, and decontaminated before beginning any polishing work. Mask off any trim or sensitive areas.
  2. Compound Application: Apply 4-5 pea-sized drops of RUPES DA Coarse Compound directly onto the pad. For larger panels, you may need to apply more compound as you work.
  3. Spreading the Compound: Place the pad flat on the paint surface before turning on the polisher. Spread the compound over a small working area (approximately 2x2 feet) on a low speed setting (e.g., speed 1-2).
  4. 연마 기술: Increase the polisher speed to the recommended setting for defect removal (typically speed 4-6 for RUPES polishers). Work in a cross-hatch pattern, applying light to moderate pressure. Ensure the pad remains flat on the surface at all times.
  5. 오버랩 패스: Overlap each pass by approximately 50% to ensure even coverage and consistent defect removal.
  6. 모니터 온도: Periodically check the temperature of the working surface with your hand. If the surface becomes too hot to touch, reduce pressure or allow the area to cool.
  7. 잔여물을 닦아내세요: After completing a section, turn off the polisher before lifting it from the surface. Use a clean, soft microfiber towel to wipe away compound residue.
Person demonstrating proper polishing technique with a RUPES polisher and pad

Image 3.1: A detailer demonstrating the correct technique for using a dual action polisher with the RUPES DA LHR21 Blue Coarse Pad, showing overlapping passes on a vehicle panel.

4. 유지관리

Proper maintenance extends the life of your RUPES DA LHR21 Blue Coarse Pad and ensures consistent performance:

RUPES DA LHR21 Blue Coarse Pad being cleaned with water and a brush

Image 4.1: A RUPES DA LHR21 Blue Coarse Pad being cleaned under running water with a soft brush, demonstrating proper post-use maintenance.

5. 문제 해결

If you encounter issues while using your RUPES DA LHR21 Blue Coarse Pad, consider the following common problems and solutions:

문제가능한 원인해결책
Pad not cutting effectively / Poor defect removal
  • Insufficient compound
  • 압력이 너무 약함
  • Too low speed setting
  • Pad clogged with dried compound
  • Pad worn out
  • Apply more RUPES DA Coarse Compound
  • 압력을 약간 높이세요
  • Increase polisher speed
  • Clean the pad thoroughly or replace
  • 패드 교체
Swirl marks / Haze left on paint
  • Pad not clean
  • Compound drying too quickly
  • Incorrect technique (e.g., tilting pad)
  • Working too large an area
  • Clean or replace pad
  • Mist surface with water or use less compound
  • Keep pad flat on surface
  • Reduce working area size
Pad detaching from backing plate
  • 부적절한 부착
  • Backing plate or pad backing dirty
  • 과도한 열 축적
  • Worn hook-and-loop on pad or backing plate
  • Re-attach pad firmly and centered
  • Clean both surfaces
  • Reduce pressure or speed
  • Replace pad or backing plate

6. 사양

7. 보증 및 지원

RUPES products are manufactured to high standards of quality and performance. While polishing pads are consumable items, RUPES stands behind its products. For specific warranty information regarding manufacturing defects or for technical support, please refer to the official RUPES website or contact your authorized RUPES dealer.

연락처 정보: