소개
This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.
Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.
안전 정보
경고: 이 지침을 따르지 않으면 심각한 부상이나 사망을 초래할 수 있습니다.
- 성인의 감독이 필요합니다: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
- 다이빙 금지: This pool is not designed for diving. Shallow water can cause serious injury.
- 클리어 영역: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
- 화학적 사용: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
- 전기 안전: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
- 사다리 안전: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.
패키지 내용
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
- 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
- 1 x INTEX Safety Ladder
- Complete Metal Frame Components (legs, horizontal beams, pins)
- 호스 및 Clamp필터 펌프 연결용 s
- Ground Cloth (may be included or recommended separately)
설치 지침
- 사이트 선택: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
- 지면 천 배치: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
- 프레임 어셈블리: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
- 라이너 설치: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
- 펌프 연결: 제공된 호스와 cl을 사용하여 필터 펌프를 풀 라이너의 지정된 입구 및 출구 포트에 연결하십시오.amps. 모든 연결 부분이 단단히 조여져 누출이 발생하지 않도록 하세요.
- 사다리 조립: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
- 풀 채우기: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.
Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.
Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.
작동 지침
- 초기 펌프 작동: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
- 일일 운영: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.
유지
- 물 화학: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
- 청소: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
- 필터 카트리지: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
- 겨울철 : For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 흐린 물 | Insufficient filtration, improper chemical balance, heavy use. | Check/clean filter cartridge, adjust water chemicals, run pump for longer periods. |
| 필터 펌프가 작동하지 않습니다 | No power, clogged impeller, airlock in system. | Check power connection and GFCI, clean impeller, bleed air from pump. |
| 물 누출 | Loose hose connections, damaged liner, faulty drain plug. | 호스를 조이세요amps, inspect liner for punctures (use repair kit), ensure drain plug is secure. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 인텍스 |
| 모델명 | 프리즘 |
| 모델 번호 | 26715 |
| 용량 | 8,592리터 |
| 조립 치수 | 366cm(직경) x 99cm(높이) |
| 라이너 소재 | 3-ply PVC-polyester |
| 프레임 소재 | Epoxy-treated Steel |
| 필터 펌프 유량 | 시간당 2,006리터 |
| Filter Pump Voltage | 110V |
| 색상 | 회색 |
| 대략적인 패키지 무게 | 40kg |
보증 및 지원
For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX web추가 지원 및 연락처 정보는 해당 사이트를 참조하세요.
