TopTes TS-501B Sound Level Meter and TS-710 Light Meter Instruction Manual

1. 서론

This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.

2. 제품 오버view

The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.

2.1 TS-501B Sound Level Meter

The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.

그림 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.

그림 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.

그림 3: 클로즈업 view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.

2.2 TS-710 Light Meter

The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.

그림 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.

그림 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.

그림 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).

3. 안전 정보

Observe the following safety precautions to prevent injury and avoid damage to the devices:

• Do not attempt to open or modify the devices.
• 기기를 물, 높은 습도 및 극한 온도로부터 멀리하십시오.
• 기기를 떨어뜨리거나 강한 충격을 주지 마십시오.
• Remove batteries if the devices will not be used for an extended period.
• 현지 규정에 따라 배터리를 폐기하십시오.

4. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• 1 x TopTes TS-710 Light Meter
• 1 x TopTes TS-501B Sound Level Meter
• 2 x Carrying Cases (one for each device)
• AAA Batteries (pre-installed or included separately)
• 사용 설명서 (본 문서)

5. 설정

5.1 배터리 설치

1. 각 기기 뒷면에 있는 배터리함을 찾으세요.
2. 배터리 덮개를 엽니다.
3. AAA 배터리를 올바른 극성(+/-)에 맞춰 삽입하세요.
4. 배터리 덮개를 단단히 닫으세요.

5.2 전원 켜기/끄기

를 누르세요 힘 button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.

6. 사용 설명서

6.1 General Functions (Both Devices)

• 최대/최소 기록: 를 누르세요 최대/최소 button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
• 데이터 보유 : 를 누르세요 잡고 있다 button (or similar icon) to freeze the current reading on the display. Press again to release.
• 백라이트: 를 누르세요 백라이트 button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.

그림 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.

6.2 TS-501B Sound Level Meter Operation

1. 장치를 켭니다.
2. Select Weighting (A/C): 를 누르세요 에어컨 button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
3. Select Response Time (FAST/SLOW): 를 누르세요 무료/무료 button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
4. Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.

6.3 TS-710 Light Meter Operation

1. 장치를 켭니다.
2. Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
3. Select Unit (LUX/FC): 를 누르세요 단위 button to switch between Lux and Foot-Candle measurement units.
4. The device will display the light intensity, ambient temperature, and humidity.

7. 유지관리

• 청소: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
• 저장: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
• 배터리 교체: Replace batteries promptly when the low battery indicator appears on the display to ensure continuous accurate operation.

8. 문제 해결

9. 사양

9.1 TS-501B Sound Level Meter

• 측정 범위: 30~130dB
• 가중치: 에어컨
• 마이크로폰: 1/2 inch Electric Condenser Microphone
• 표시하다: 2.25인치 백라이트 LCD
• 기능: MAX/MIN recording, Data Hold, Auto Power-Off

9.2 TS-710 Light Meter

• Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
• 감지기: 180° Rotating Sensor
• 추가 측정: 주변 온도, 습도
• 표시하다: 2.25인치 백라이트 LCD
• 기능: MAX/MIN recording, Data Hold, Auto Power-Off

10. 보증 및 지원

TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.