1. 서론
Thank you for choosing the Zgrmbo MX6035 Digital Atomic Alarm Clock. This clock is designed to provide accurate timekeeping, indoor temperature, and humidity readings, along with a reliable alarm function. Its atomic synchronization feature ensures precise time without manual adjustments, and the battery-operated design offers portability and convenience.
Figure 1: Zgrmbo MX6035 Digital Atomic Alarm Clock
2. 패키지 내용
- 1 x Zgrmbo MX6035 Digital Atomic Alarm Clock
- 1 x 사용자 설명서
Note: 3 x AAA batteries are NOT included and must be purchased separately.
3. 제품 특징
- Accurate Atomic Time: Automatically synchronizes with the WWVB radio broadcast from NIST in Fort Collins, Colorado, ensuring precise timekeeping.
- Auto-Dimming Smart Night Light: Features a built-in ambient light sensor that automatically illuminates the display in dark environments. The display can also be manually lit by pressing the top of the clock.
- 스누즈 기능이 있는 알람: A classic alarm function with a gradually increasing beep sound for 120 seconds. The top snooze button provides an extra 5-minute nap.
- 멀티 디스플레이: Shows time, date, indoor temperature (℉/℃), and indoor humidity.
- Battery Operated & Portable: Cordless design powered by 3 AAA batteries (not included), making it ideal for bedrooms, desks, or travel.
Figure 2: Atomic Time Synchronization
Figure 3: Automatic Night Light in use
Figure 4: Alarm with 5-Minute Snooze
Figure 5: Multi-Display Features
Figure 6: Battery Operated Design
4. 설정 가이드
Follow these steps for initial setup of your Zgrmbo MX6035 Atomic Alarm Clock:
- 배터리 설치: Open the battery compartment on the back of the clock and insert 3 new AAA batteries, ensuring correct polarity.
- Automatic WWVB Signal Search: Upon battery installation, the clock will automatically begin searching for the WWVB atomic signal. This process may take 7-14 minutes. Place the clock near a window, ideally facing Colorado, for optimal reception. A signal icon will appear on the display when reception is successful.
- 시간대 선택: Once the signal is received and the time is set, press the 세트 button to cycle through and select your correct time zone (PST, MST, CST, EST).
Figure 7: Simple 3-Step Setup
설정 비디오 가이드
Video 1: Unboxing and Initial Setup of the MX6035 Alarm Clock. This video demonstrates how to unbox the clock, install batteries, and observe the initial synchronization process.
5. 사용 설명서
5.1. 시간 및 날짜 표시
- The main display shows the current time.
- The date (month and day) is displayed below the alarm time.
- Indoor temperature (℉/℃) and humidity (%) are shown at the bottom right.
5.2. 12/24 Hour Format Switching
12시간제(오전/오후)와 24시간제 형식을 전환하려면 버튼을 누르세요. UP 단추.
Figure 8: 12/24 Hour Format Switching
5.3. 알람 설정
- 를 누르세요 알셋 버튼을 한 번 누르면 알람 설정 모드로 들어갑니다. 알람 시간이 깜빡입니다.
- 사용하세요 UP or 아래에 알람 시간을 조정하는 버튼입니다.
- 누르다 알셋 again to confirm the hour and move to alarm minute setting. The alarm minute will flash.
- 사용하세요 UP or 아래에 알람 분을 조정하는 버튼입니다.
- 누르다 알셋 a third time to confirm and exit alarm setting mode. The alarm icon will appear on the display, indicating the alarm is active.
5.4. 스누즈 기능
When the alarm sounds, press the top of the clock (the 켜짐/꺼짐 button area) to activate the snooze function. The alarm will pause for 5 minutes and then sound again. You can repeat this process.
5.5. Disabling the Alarm
알람을 완전히 끄려면 버튼을 누르세요. 알셋 button when the alarm is not sounding. The alarm icon on the display will disappear.
5.6. Manual Backlight Activation
In any lighting condition, press the top of the clock (the 켜짐/꺼짐 button area) to manually illuminate the display for a few seconds.
6. 유지관리
- 청소: 부드럽고 마른 천으로 시계를 닦으세요. 연마성 세제나 화학 약품을 사용하지 마세요.
- 배터리 교체: When the display dims or functions become erratic, replace all three AAA batteries with new ones. Ensure correct polarity.
- 저장: 장기간 시계를 보관할 경우, 배터리 누출을 방지하기 위해 배터리를 제거하세요.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Clock does not set time automatically / Time is incorrect. | Poor WWVB signal reception. Incorrect time zone selected. | Place the clock near a window, away from electronic interference. Allow 7-14 minutes for signal reception. Ensure the correct time zone is selected using the 세트 button. If reception is consistently poor, you may need to manually set the time (see manual for advanced settings, if available, or try re-inserting batteries to force a new signal search). |
| 백라이트가 어둡거나 작동하지 않습니다. | Low batteries. Ambient light sensor detecting too much light. | Replace batteries with new ones. Ensure the clock is in a sufficiently dark environment for the auto-dimming feature to activate. Manually press the top of the clock to check if the backlight works. |
| 알람이 울리지 않습니다. | 경보가 작동하지 않습니다. 경보음이 너무 작습니다(조절 가능한 경우). | Ensure the alarm icon is visible on the display. If not, set the alarm as per section 5.3. This model has a fixed alarm volume. |
| 디스플레이가 비어 있거나 깜빡입니다. | 배터리가 부족하거나 방전되었습니다. | AAA 배터리 3개를 모두 새 배터리로 교체하십시오. |
| Daylight Saving Time (DST) adjustment issue. | Clock not automatically adjusting for DST. | The clock is designed to automatically adjust for DST based on the WWVB signal. Ensure good signal reception. If manual override is needed, consult the full product manual for specific button sequences (often involves the 아래에 버튼 또는 세트 button in advanced modes). |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | Zgrmbo |
| 모델 | MX6035 |
| 디스플레이 유형 | 디지털 LCD |
| 전원 | AAA 배터리 3개(포함되지 않음) |
| 제품 치수 | 폭 5.5인치 x 높이 3.25인치 |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 온도 범위 | 32°C ~ 122°F(0°C ~ 50°C) |
| 습도 범위 | 20 % RH에서 95 % RH까지 |
| 특별 기능 | Atomic Time, Auto-Dimming Night Light, Alarm, Snooze, Date Display, Indoor Temp/Humidity |
9. 보증 및 지원
For warranty information or technical support, please refer to the product packaging or contact the seller/manufacturer directly through your purchase platform. Keep your proof of purchase for any warranty claims.
Manufacturer: MEIZHOU MINGXING ELECTRONICS CO.,LTD
