소개
The NITECORE BB Nano is a compact and versatile electronic air blower designed for efficient dust removal from sensitive equipment such as cameras, lenses, and other electronics. Its portable design and powerful performance make it suitable for both indoor and outdoor use.
Image: The NITECORE BB Nano electronic air blower shown with its included NITECORE keychain tag.
패키지 내용
- NITECORE BB Nano Electronic Air Blower
- 나이트코어 키체인 Tag
- USB-C Charging Cable (not explicitly listed but implied for rechargeable devices)
Note: Enhanced Cleaning Kit and Vacuum Attachment Kit are not included with the standard package.
제품 특징
- 소형 및 경량: Weighs only 99g (3.49 oz), designed for portability.
- 강력한 모터: Equipped with a 30W high-power motor and a 35mm integrated impeller with 18 spiral blades for efficient blowing performance.
- High Dust Removal Pressure: Delivers 2.6 kPa wind pressure, comparable to the NITECORE BB2 Air Blower.
- Unidirectional Air Intake: Prevents secondary damage to surfaces by ensuring clean air intake.
- 고밀도 필터: Features a 250-mesh nylon filter, 25% denser than conventional 200-mesh filters, for meticulous dust filtration.
- 충전식 배터리: Built-in 4.8Wh Li-ion battery provides approximately 90 cleaning times on a full charge.
- 내구성 있는 구조: Made from high-quality PC material with a detachable premium silicone nozzle.
- Optional Vacuuming Function: Compatible with optional vacuuming attachments (sold separately) to prevent dust from re-entering the air duct.
Image: Diagram illustrating the NITECORE BB Nano's 30W high-power motor and integrated impeller, highlighting its 2.6 kPa dust removal wind pressure.
Image: Comparison of the NITECORE BB Nano's 250-mesh nylon filter with a conventional 200-mesh filter, demonstrating superior dust filtration.
Image: Visual representation of the power indicator light: Green (Above 50%), Blue (Below 50%), Red (Below 10%).
설정
1. 초기 충전
- Before first use, fully charge the BB Nano.
- Connect the included USB-C charging cable to the charging port on the device.
- 케이블의 다른 쪽 끝을 USB 전원(예: 벽면 어댑터, 컴퓨터 USB 포트)에 연결합니다.
- The power indicator light will show charging status and turn off when fully charged.
2. 노즐 부착
- Ensure the silicone nozzle is securely attached to the blower's air outlet.
- The nozzle is detachable for cleaning or replacement.
작동 지침
전원 켜기/끄기
- 전원을 켜려면: 전원 버튼을 길게 누르세요.
- 전원을 끄려면: 전원 버튼을 다시 길게 누르세요.
Cleaning Modes and Wind Speeds
The BB Nano offers two cleaning modes and two wind speed options:
- Fast Cleaning (High Wind Speed): Press and hold the power button to activate. This mode provides efficient cleaning.
- Constant Cleaning (Low Wind Speed): Double-press the power button to activate. This mode operates with minimal noise.
Image: Visual guide showing the two wind speed options (High for efficient cleaning, Low for minimal noise) and two cleaning modes (Fast Cleaning by pressing and holding, Constant Cleaning by double-pressing).
사용 예amp레
- 사진 촬영 장비: Use to remove dust from camera sensors, lenses, and camera bodies.
- 전자제품: Ideal for cleaning keyboards, computer components, and other delicate electronics.
- 일반 먼지 제거: Suitable for various indoor and outdoor dusting tasks.
Image: Using the BB Nano to clean a camera sensor.
Image: Using the BB Nano to clean a computer keyboard.
Image: Using the BB Nano to clean a car interior.
Image: Using the BB Nano for cleaning during outdoor photography.
유지
1. 필터 청소/교체
- The 250-mesh nylon filter is designed to intercept fine dust.
- Regularly inspect the filter for accumulated dust.
- To clean, gently remove the filter and tap out any loose dust. If heavily soiled, it may be rinsed with water and thoroughly dried before reinstallation.
- Replace the filter if it becomes damaged or excessively clogged.
2. 노즐 관리
- The silicone nozzle is detachable.
- Clean the nozzle as needed to ensure unobstructed airflow.
3. 보관
- Store the BB Nano in a cool, dry place when not in use.
- 장치를 극한의 온도나 직사광선에 노출시키지 마십시오.
문제 해결
- 장치가 켜지지 않음: 배터리가 충전되어 있는지 확인하세요. 전원에 연결한 후 다시 시도해 보세요.
- 약한 공기 흐름: Check if the filter is clogged and clean or replace it. Ensure the nozzle is securely attached.
- 이상한 소음: Discontinue use and inspect for any obstructions in the air intake or nozzle. If the issue persists, contact customer support.
명세서
| 모델 | BB나노 |
| 상표 | Nitecore |
| 품목 무게 | 3.49온스(99그램) |
| 패키지 크기 | 5.47 x 4.17 x 2.24 인치 |
| 재료 | Silicone (nozzle), PC (body) |
| 힘 | 30W High Power Motor |
| Dust Removal Wind Pressure | 2.6k파스칼 |
| 배터리 | Built-in 4.8Wh Li-ion battery (1 Lithium Polymer battery included) |
| 필터 유형 | 250메쉬 나일론 필터 |
안전 정보
- Do not point the air blower directly at eyes or sensitive body parts.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
- 기기를 물에 담그거나 과도한 습기에 노출시키지 마십시오.
- 지정된 충전 케이블과 전원만 사용하세요.
- 기기를 분해하거나 개조하지 마십시오. 보증이 무효화될 수 있으며 안전상의 위험이 발생할 수 있습니다.
- Ensure the air intake is not blocked during operation to prevent overheating.
보증 및 지원
For warranty information and customer support, please refer to the official NITECORE web사이트를 방문하거나 가까운 대리점에 문의하세요. 구매 영수증을 구매 증빙 자료로 보관하세요.
제조업체: SYSMAX Innovations Co., Ltd.
