제품 끝view
The JessEm Large Imperial Tool Setting Gauge is a precision measuring instrument designed for accurate height and depth settings on various woodworking tools, including router tables and table saws. Crafted from durable 14-gauge stainless steel, this gauge offers reliability and long-lasting performance. Its versatile design allows for both vertical and horizontal use, making it an essential tool for precise adjustments in your workshop.
그림 1: 전면 view of the JessEm Large Imperial Tool Setting Gauge.
설정
The JessEm Large Imperial Tool Setting Gauge comes ready for immediate use. No assembly is required. Before first use, ensure the gauge is clean and free of any debris that might affect its accuracy.
- 점검: Visually inspect the gauge for any signs of damage or manufacturing defects.
- 청소: Wipe down the gauge with a clean, dry cloth to remove any dust or residue from packaging.
- 친하게 함: Take a moment to familiarize yourself with the gauge's components, including the main body, the adjustable arm, the solid brass knob, and the imperial scale markings.
작동 지침
This section details the steps for using your JessEm Large Imperial Tool Setting Gauge to achieve precise height and depth measurements.
Adjusting the Gauge
- Loosen the Knob: To adjust the height or depth, gently loosen the solid brass knob located on the side of the gauge. This will allow the adjustable arm to move freely.
- 게이지를 위치시키세요: Place the base of the gauge on the reference surface (e.g., router table top, table saw top).
- Set Measurement: Raise or lower the adjustable arm until the desired measurement on the imperial scale aligns with the top of your router bit, saw blade, or other tool. The gauge features micro-detents, allowing for precise 1/16-inch increments for fine adjustments.
- 손잡이를 조이세요: Once the desired measurement is set, tighten the solid brass knob to secure the adjustable arm in place. This ensures the measurement remains stable during use.
그림 2: 클로즈업 view of the imperial scale and micro-detents for precise adjustments.
수직 및 수평 사용
The JessEm Large Imperial Tool Setting Gauge is designed for maximum versatility and can be used in both vertical and horizontal orientations.
- 수직 사용: Typically used for setting the height of router bits or saw blades from a flat surface. Place the gauge upright on the table.
- 수평 사용: Can be laid flat to measure depths or distances from an edge. This is useful for setting fence distances or other horizontal measurements.
Figure 3: The gauge can be positioned at various angles for versatile measurement applications.
그림 4: 예ample of the gauge being used to set the height of a table saw blade.
최대 여행
The gauge offers a maximum travel of 3-3/8 inches, providing a wide measuring range suitable for various woodworking tasks, from small detail work to larger projects.
유지
Proper maintenance will ensure the longevity and accuracy of your JessEm Large Imperial Tool Setting Gauge.
- 청소: After each use, wipe the gauge with a clean, dry, soft cloth to remove sawdust, oils, or other residues. Avoid using abrasive cleaners or solvents that could damage the finish or markings.
- 저장: Store the gauge in a dry environment, away from excessive moisture or extreme temperatures. Keeping it in a protective case or drawer will prevent scratches and dings.
- 매끄럽게 하기: Periodically, a very small amount of light machine oil can be applied to the moving parts (e.g., the adjustable arm slide) to ensure smooth operation. Wipe off any excess oil.
- 교정 확인: While the gauge is designed for precision, it's good practice to occasionally check its accuracy against a known standard ruler or measuring device.
문제 해결
This section addresses common issues you might encounter with your tool setting gauge.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Gauge arm is stiff or difficult to move. | 먼지/파편 축적, 윤활 부족. | Clean the sliding mechanism thoroughly. Apply a small amount of light machine oil to the sliding surfaces. |
| 부정확한 측정. | Gauge not properly tightened; debris on measuring surface; gauge is damaged. | Ensure the brass knob is tightened securely after setting. Clean the base and measuring arm. If damage is suspected, contact JessEm support. |
| Brass knob is loose or doesn't hold. | Worn threads or internal mechanism. | Inspect the knob and its threading. If worn, contact JessEm support for replacement parts or service. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 07310 |
| 재료 | 14게이지 스테인리스 스틸 |
| 측정 시스템 | 장엄한 |
| 맥스 트래블 | 3-3/8 인치 |
| 조정 증분 | 1/16-inch (micro-detents) |
| 품목 무게 | 2.1파운드 |
| 패키지 크기 | 10.59 x 6.77 x 2.24 인치 |
| 전원 | 수동식 |
| 포함된 구성 요소 | Tool Setting Gauge |
| 제조업체 | 제스엠 |
| 원산지 | 캐나다 |
보증 및 지원
Specific warranty details for the JessEm Large Imperial Tool Setting Gauge are not provided within this manual. For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official JessEm web사이트를 방문하거나 고객 서비스에 직접 문의하세요.
자세한 정보와 연락처는 다음에서 확인할 수 있습니다. JessEm Store on Amazon 또는 제조업체의 공식 web대지.
