RAINPOINT B0CQR285J5

RAINPOINT 2-Way Brass Irrigation Timer

Model: B0CQR285J5

사용자 설명서

소개

The RAINPOINT 2-Way Brass Irrigation Timer is designed to automate your garden and lawn watering, providing efficient and flexible control over your irrigation system. This manual will guide you through the installation, programming, and maintenance of your new device, ensuring optimal performance and water conservation.

제품 특징

설정

Follow these steps to set up your RAINPOINT 2-Way Brass Irrigation Timer:

  1. 배터리 설치: Open the battery compartment on the back of the timer. Insert two AA alkaline batteries (not included), ensuring correct polarity. Close the compartment securely, making sure the sealing ring is properly seated to prevent water ingress.
  2. 수도꼭지에 부착: Screw the brass inlet of the timer onto your outdoor faucet. The 360° swivel joint allows for easy, tool-free installation. Ensure a tight fit to prevent leaks.
  3. 호스를 연결하십시오: Attach your garden hoses to the two independent outlets at the bottom of the timer. Quick connectors are included for convenience.
  4. 시계 설정: Turn the rotary dial to 'SET CLOCK'. Use the '+' and '-' buttons to set the current time. Press 'OK' to confirm.
RAINPOINT 2-Way Brass Irrigation Timer showing tool-free installation and quick connectors.

Image: The timer connected to a faucet, highlighting the tool-free installation and included quick connectors.

작동 지침

The RAINPOINT irrigation timer offers flexible programming options for efficient watering.

자동 관개 프로그래밍 :

  1. 시작 시간 설정: Turn the dial to 'START TIME'. Use '+' and '-' to set the desired start time for watering. Press 'OK' to confirm.
  2. 기간 설정: Turn the dial to 'HOW LONG'. Select the zone (Zone 1 or Zone 2) using the 'ZONE' button. Use '+' and '-' to set the watering duration (from 1 minute to 3 hours 59 minutes). Press 'OK' to confirm for each zone.
  3. 빈도 설정: Turn the dial to 'HOW OFTEN'. Select the zone using the 'ZONE' button. Use '+' and '-' to set the watering frequency (every 1-12 hours or every 1-7 days). Press 'OK' to confirm for each zone.
  4. 프로그램 활성화: Turn the dial to 'ON' to activate the programmed schedule.
RAINPOINT 2-Way Brass Irrigation Timer display showing frequency and duration settings.

Image: The timer's display illustrating automatic cycle modes with frequency and duration settings.

수동 관개 :

프로그래밍된 일정에 영향을 주지 않고 수동으로 물을 주는 방법:

  1. Press the 'MANUAL' button.
  2. Use the 'ZONE' button to select the desired zone (Zone 1, Zone 2, or both).
  3. Use '+' and '-' to set the manual watering duration (from 1 minute to 6 hours).
  4. '확인'을 눌러 수동 급수를 시작하세요. 설정된 시간이 지나면 타이머가 자동으로 멈춥니다.
RAINPOINT 2-Way Brass Irrigation Timer showing manual watering in progress.

Image: The timer display during manual irrigation, with a person watering plants.

비 지연 기능:

To temporarily pause your watering schedule due to rain:

  1. '지연' 버튼을 누르세요.
  2. Use '+' and '-' to select a delay period of 24, 48, or 72 hours.
  3. Press 'OK' to activate the rain delay. The timer will automatically resume its programmed schedule after the selected delay period.
RAINPOINT 2-Way Brass Irrigation Timer showing rain delay options.

Image: The timer display showing rain delay options (24, 48, 72 hours) with a rainy background.

Turning Off a Zone:

If you need to disable one of the watering zones:

  1. Turn the rotary dial to 'START TIME'.
  2. Press and hold the 'ZONE' button for 3-5 seconds to select the zone you wish to turn off (Zone 1 or Zone 2).
  3. Press '+' or '-' until 'OFF' is displayed for the selected zone.
  4. Turn the rotary dial to save the changes.

Video: This video demonstrates how to turn off one of the irrigation zones on the RAINPOINT timer, showing the steps to select a zone and set it to 'OFF'.

유지

적절한 유지 관리는 관개 타이머의 수명 연장과 최적의 성능을 보장합니다.

RAINPOINT 2-Way Brass Irrigation Timer showing waterproof features and battery compartment.

Image: The timer highlighting its IP65 waterproof rating, durable brass connection, and the sealed battery compartment.

문제 해결

문제가능한 원인해결책
물의 흐름이 없습니다Low battery, clogged filter, faucet off, incorrect program.Replace batteries, clean filter, open faucet, check program settings.
타이머가 예정된 시간에 물을 주지 않음Incorrect clock setting, program not activated, rain delay active.Verify clock, ensure dial is on 'ON', check for active rain delay.
연결부에서 물이 새고 있습니다Loose connection, worn washer, damaged O-ring.Tighten connections, replace washers/O-rings.
디스플레이가 비어 있거나 어둡습니다배터리가 소모되었거나 부족합니다.배터리를 교체하세요.

명세서

보증 및 지원

RAINPOINT products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the contact information provided with your purchase or visit the official RAINPOINT web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

관련 문서 - B0CQR285J5

사전view RainPoint ITV205 Two-Zone Water Timer User Manual
This user manual provides comprehensive instructions for the RainPoint ITV205 two-zone water timer. Learn how to install, program, operate, troubleshoot, and maintain your timer for efficient garden watering. Covers features like rain delay, manual watering, and battery status.
사전view RainPoint ITV205 물 타이머 사용 설명서
RainPoint ITV205 자동 정원 호스 타이머에 대한 포괄적인 사용자 가이드로, 설정, 다중 구역 프로그래밍, 비로 인한 지연, 수동 물주기, 문제 해결 및 유지 관리에 대한 내용을 다룹니다.
사전view RainPoint ITV105 미니 디지털 수도꼭지 타이머 사용 설명서
Comprehensive user manual for the RainPoint ITV105 Mini Digital Tap Timer. Learn how to install, program, and operate your automated garden watering system, including features like rain delay, manual watering, and battery status. Includes specifications and important warnings.
사전view RainPoint 1구역 급수 타이머 사용 설명서 (모델 ITV105)
RainPoint ITV105 1구역 급수 타이머의 설치, 프로그래밍, 강우 지연 및 수동 급수와 같은 추가 기능, 문제 해결, 주의 사항 및 보증 정보를 자세히 설명하는 종합 사용자 설명서입니다.
사전view RainPoint 퀵다이얼 자동 호스 타이머 사용 설명서 ITV152
RainPoint Quickdial 자동 호스 타이머(모델 번호 ITV152)의 종합 사용 설명서입니다. 이 설명서는 제품의 모든 기능을 다룹니다.view제품 사양, 설치, 관개 시간 및 빈도 프로그래밍, 수동 작동, 청소, 문제 해결, 주의 사항, 보증 정책 및 고객 지원에 대한 내용이 포함되어 있습니다.
사전view RainPoint IK10P WiFi 자동 급수 펌프 키트 사용 설명서
RainPoint IK10P WiFi 자동 급수 펌프 키트 사용 설명서에는 제품 기능, 설치, 작동, 문제 해결 및 보증에 대한 자세한 정보가 포함되어 있습니다. 이 스마트 급수 시스템은 식물 관리를 자동화하는 데 도움이 됩니다.