Evenflo EveryFit/All4One 3-in-1 컨버터블 카시트 사용 설명서

1. 제품 오버view

The Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat is designed to provide comfort, safety, and longevity for your child, accommodating them from infancy through booster age. This car seat transitions through three modes of use, offering protection for up to 10 years.

• 10년 사용 후기: Functions as an infant car seat, convertible car seat, and high-back booster.
• 세 가지 모드: Rear-facing with harness (4-40 lb), forward-facing with harness (22-65 lb), and high-back booster (40-120 lb).
• 안전 우선순위: Meets or exceeds all applicable Federal Safety Standards, including structural integrity, side-impact, rollover, and temperature testing.
• 퀵클린 커버: Features a removable and washable cover for easy maintenance.
• 적절한 핏: Equipped with a one-hand, 12-position headrest and no-rethread harness for easy adjustment as your child grows.

그림 1: 전면 view of the Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat in Belmont Brown, showcasing its design and integrated cup holders.

2. 설정 및 설치

Proper installation is crucial for your child's safety. Always refer to the complete instruction manual included with your car seat for detailed steps and vehicle-specific requirements.

2.1. 안전벨트 및 헤드레스트 조절

The car seat features a one-hand, 12-position headrest and a no-rethread harness system, allowing for easy adjustment as your child grows without the need to uninstall the car seat.

Figure 2: Illustration demonstrating the upward adjustment of the 12-position headrest and harness system to ensure a proper fit for a growing child.

2.2. 설치 방법

The Evenflo EveryFit/All4One car seat can be installed using either the vehicle's LATCH system or the vehicle's seatbelt. The Quick Connector LATCH and belt guides are designed for an easy and secure installation.

• LATCH 설치: Utilize the Quick Connector LATCH attachments to secure the car seat to your vehicle's lower anchors. Ensure a tight fit with minimal movement (less than 1 inch side-to-side or front-to-back at the belt path).
• Seatbelt Installation: Route the vehicle's seatbelt through the designated belt paths. Lock the seatbelt and ensure the car seat is securely installed with no more than 1 inch of movement.

그림 3: 후면 view of the car seat, highlighting the clear belt path for secure installation using the vehicle's seatbelt.

3. 작동 모드

This car seat offers three distinct modes to accommodate your child's growth and development.

3.1. Rear-Facing with Harness

This mode is suitable for infants and toddlers. The car seat must be installed in a rear-facing position in your vehicle.

• 무게 범위: 4~40파운드
• 리클라이닝 자세: Features three recline positions for optimal comfort and safety in rear-facing mode.

그림 4: 측면 view of the car seat illustrating the range of recline positions available for proper installation and child comfort.

3.2. Forward-Facing with Harness

Once your child meets the minimum age and weight requirements, the car seat can be converted to a forward-facing position.

• 무게 범위: 22~65파운드
• 최소 연령: For children at least 2 years old.

3.3. High-Back Booster

For older children, the car seat transitions into a high-back booster, utilizing the vehicle's seatbelt to secure the child.

• 무게 범위: 40~120파운드
• 최소 연령: For children at least 4 years old.

Figure 5: The car seat configured as a high-back booster, demonstrating the proper routing of the vehicle's seatbelt for older children.

4. 유지관리 및 청소

Regular cleaning helps maintain the car seat's condition and hygiene. The Evenflo EveryFit/All4One features a Quick Clean Cover for convenience.

4.1. Quick Clean Cover

The seat pad features a Quick Clean Cover that is easy to remove and wash.

Figure 6: A hand demonstrating the removal of the Quick Clean Cover from the car seat for cleaning.

4.2. General Care Instructions

• 좌석 패드: 시트 패드는 찬물에 단독 세탁하고, 약한 세탁 코스로 세탁하세요. 낮은 온도로 10~15분간 건조하세요.
• 마구: 하네스는 순한 비누와 물로 닦아낼 수 있습니다. 하네스를 완전히 자연 건조시키십시오.
• 플라스틱 및 금속 부품: These parts may be wiped clean with mild soap and water and dried with a soft cloth.
• 중요한: DO NOT lubricate or immerse in water any part of this child restraint, unless rinsing is specifically permitted by the full instruction manual.

4.3. 탈착식 컵홀더

The integrated cup holders are removable for easy cleaning.

Figure 7: An image showing a removable cup holder detached from the car seat, indicating ease of cleaning.

5. 문제 해결

If you encounter issues with your Evenflo EveryFit/All4One car seat, consider the following common troubleshooting steps. Always refer to the full instruction manual for comprehensive guidance.

• Car Seat Movement/Wiggling: Ensure the car seat is installed tightly. When installed with LATCH or seatbelt, the car seat should not move more than 1 inch side-to-side or front-to-back at the belt path. Re-read the installation section of your manual and re-install if necessary.
• Harness Adjustment Difficulty: Check for any twists in the harness straps. Ensure the harness adjuster is free of debris. Refer to the harness adjustment section in your manual.
• Structural Concerns: If you observe any damage, bending, or cracking of the car seat frame or components, discontinue use immediately. Contact Evenflo Customer Service for assistance and do not attempt to repair the car seat yourself.
• 아동의 불편함: Ensure the harness is at the correct height for your child's shoulders (at or below for rear-facing, at or above for forward-facing). Adjust the headrest and recline position as needed for comfort and proper fit.

For further assistance, please contact Evenflo Customer Service.

6. 사양

Key specifications for the Evenflo EveryFit/All4One 3-in-1 Convertible Car Seat:

Figure 8: Diagram showing the approximate dimensions of the Evenflo EveryFit/All4One car seat.

7. 보증 및 지원

Evenflo products are designed and tested to meet or exceed all applicable federal safety standards. For specific warranty information, product registration, or to contact customer support, please visit the official Evenflo web사이트를 참조하거나 구매 시 포함된 보증 카드를 참조하세요.

이븐플로 공식 Web대지: Visit the Evenflo Store on Amazon