Geniatech XPI-3566 싱글보드 컴퓨터 사용자 설명서

1. 서론

The Geniatech XPI-3566 is a high-performance single-board computer designed for various embedded applications. It features a Rockchip RK3566 processor with a built-in 0.8T NPU and up to 8GB of LPDDR4 RAM. This board supports multiple operating systems including Linux Debian10, Android 11, and Raspbian OS emulator, offering seamless migration capabilities for projects previously developed on Raspberry Pi platforms.

The XPI-3566 is equipped with a 40-pin GPIO extension interface, compatible with Raspberry Pi accessories, and supports 4K HDMI, MIPI-DSI, and MIPI-CSI display outputs. Integrated WiFi and wired network connections make it suitable for AI, machine learning, and multimedia applications.

Image 1.1: Geniatech XPI-3566 Single Board Computer, top view 다양한 포트와 구성 요소를 보여줍니다.

2. 설정 가이드

2.1 하드웨어 오버view

Familiarize yourself with the various ports and components on the XPI-3566 board before proceeding with setup.

Image 2.1: Labeled diagram of the XPI-3566 board, highlighting HDMI OUT, MIPI-DSI, MIPI-CSI, Type C, LAN, USB 3.0, USB 2.0, and Extension GPIO.

2.2 전원 공급

Connect a compatible 5V power supply to the USB Type-C port. Ensure the power supply can provide sufficient current for stable operation, especially when connecting multiple peripherals.

2.3 디스플레이 연결

Connect your display device using one of the available interfaces:

• HDMI : For standard monitors and TVs.
• MIPI-DSI: For compatible display panels.
• MIPI-CSI: For compatible camera modules.

2.4 주변 장치 연결

• USB 포트: 키보드, 마우스 및 기타 USB 장치를 USB 2.0 또는 USB 3.0 포트에 연결하십시오.
• 이더넷: For a wired network connection, plug an Ethernet cable into the LAN port.
• GPIO: The 40-pin GPIO header allows for connection to various sensors, actuators, and expansion boards. Refer to the pin definition table for details.

Image 2.2: Detailed pinout diagram for the 40-pin GPIO header, showing definitions for VCC, GND, I2C, UART, PWM, and other functions.

2.5 운영 체제 설치

The XPI-3566 supports Linux Debian10, Android 11, and Raspbian OS emulator. Installation typically involves flashing an image to the eMMC storage or a TF card. Detailed instructions for flashing the OS can be found on the Geniatech support web대지.

3. 사용 설명서

3.1 첫 번째 부팅

After connecting all necessary peripherals and flashing the operating system, connect the power supply. The board should boot automatically. Follow the on-screen prompts for initial setup of your chosen operating system.

3.2 네트워크 구성

The XPI-3566 supports both wired Ethernet and wireless WiFi/Bluetooth connectivity. Configure your network settings within the operating system's network manager. For WiFi, select your network and enter the password. For Bluetooth, pair with compatible devices.

3.3 Software Development and Applications

The XPI-3566 is designed for a wide range of applications, including:

• Programming Education
• 소프트웨어 개발
• Business Display Advertising Machines
• Touch Control All-in-one Machines
• Self-service Terminals
• 멀티미디어 단말기

Its compatibility with Raspberry Pi's 40P GPIO and support for various operating systems facilitate diverse project development.

이미지 3.1: Examples of XPI-3566 application scenarios, including programming education, software development, and various terminal uses.

Image 3.2: Illustration of software customization options, showing logos for RaspbianOS simulator, Debian 10, and Android 11.

4. 유지관리

To ensure the longevity and optimal performance of your Geniatech XPI-3566, follow these maintenance guidelines:

• 깨끗하게 유지하십시오: Regularly clean the board to prevent dust accumulation, which can lead to overheating. Use compressed air or a soft brush.
• 극한의 환경을 피하세요: Operate the board within its specified temperature and humidity ranges. Avoid direct sunlight, excessive heat, or moisture.
• 적절한 환기: Ensure adequate airflow around the board, especially if it is enclosed in a case.
• 보안 연결: Periodically check all cable connections (power, display, peripherals) to ensure they are secure.
• 소프트웨어 업데이트: Keep your operating system and installed software updated to benefit from performance improvements and security patches.

5. 문제 해결

If you encounter issues with your XPI-3566, consider the following troubleshooting steps:

5.1 전원 없음/부팅 안 됨

• 전원 공급 장치 확인: Ensure the power adapter is correctly connected and provides the specified 5V output with sufficient current.
• 연결 확인: Confirm all cables are securely plugged in.
• Re-flash OS: If the board does not boot, the operating system image might be corrupted. Try re-flashing the OS to the eMMC or TF card.

5.2 디스플레이 문제

• 케이블 점검: Ensure the HDMI, MIPI-DSI, or MIPI-CSI cable is properly connected to both the board and the display.
• 디스플레이 입력: 디스플레이의 입력 소스가 올바르게 설정되어 있는지 확인하십시오.
• 해상도 설정: If you see a distorted image, the resolution might be incompatible. Try booting with a different display or accessing the OS via serial console to adjust settings.

5.3 네트워크 연결 문제

• 유선 이더넷: Check the Ethernet cable and router connection. Verify network settings within the OS.
• WiFi/블루투스: Ensure the wireless module is enabled in the OS. Check WiFi network credentials and signal strength. For Bluetooth, ensure the device is discoverable.

5.4 주변 장치가 감지되지 않음

• USB 장치: Try connecting the device to a different USB port. Ensure the device drivers are installed in the operating system.
• GPIO Devices: Verify your wiring and software configuration for the GPIO pins. Consult the 40-pin header definition.

6. 사양

Detailed technical specifications for the Geniatech XPI-3566 Single Board Computer:

Image 6.1: Performance comparison highlighting the RK3566 processor's features like 1.8GHz frequency and 0.8 TOPS NPU.

Image 6.2: Comparison of ROM write speed and RAM read/write speed, demonstrating increased performance with eMMC design.

7. 보증 및 지원

For warranty information and technical support, please refer to the official Geniatech web사이트에서 확인하거나 고객 서비스에 직접 문의하세요. 구매 증빙 자료로 구매 영수증을 보관하세요.

자세한 정보와 지원 리소스는 다음에서 찾을 수 있습니다. Geniatech Store on Amazon.