1. 제품 오버view
The Vrabocry A550 RGBCCT High Speed Amplifier is designed to extend the reach and maintain the brightness of LED strips controlled by a PWM LED controller. This 5-channel amplifier ensures that LED strips retain their intended brightness and color consistency over longer distances by amplifying the control signal and power. It supports DC5-24V input and provides a total output current of 50A (5 channels x 10A per channel), making it suitable for various RGBWW, RGBW, and CCT LED lighting applications.
그만큼 amplifier features a high-speed design to minimize signal delay, allowing for seamless synchronization when multiple units are cascaded. Its aluminum shell provides durability and efficient heat dissipation.
그림 1.1: 앞쪽 각도 view of the Vrabocry A550 RGBCCT High Speed Amplifier. This image shows the overall design of the amplifier, including its robust aluminum casing 및 연결 단자.
2. 설정 및 설치
Proper installation is crucial for the safe and effective operation of the amplifier. Please follow these steps carefully:
- 전원 공급 장치: Ensure you have a stable DC5-24V power supply appropriate for your LED strip and amplifier's total load.
- 컨트롤러 연결: Connect the output of your PWM LED controller to the 'Input' terminals of the amplifier. Ensure correct polarity (V+, R, G, B, CW, WW or similar channels depending on your LED type).
- LED 스트립 연결: Connect your LED strips to the 'Output' terminals of the amplifier. Match the channels (V+, R, G, B, CW, WW) from the amplifier to the corresponding inputs on your LED strip.
- Cascading (Optional): For longer LED installations, multiple amplifiers can be cascaded. Connect the output of the first amplifier to the input of the next amplifier, and ensure each amplifier has its own adequate power supply.
그림 2.1: Wiring diagram illustrating the connection of the amplifier with a power supply and an RGBWW controller. This diagram shows how to connect the AC power supply to a DC power supply, which then powers both the controller and the amp증폭기, 함께 amplifier extending the signal to additional LED strips.
그림 2.2: 맨 위 view of the Vrabocry A550 amplifier, highlighting the clearly labeled input and output terminals. The input terminals are on the left, and the output terminals are on the right, with power connections for both sections.
중요 경고:
- Always confirm that the power supply voltage is correct (DC5-24V) before connecting.
- Never connect two wires directly to avoid short circuits.
- Ensure all lead wires are correctly connected with proper polarity.
3. 사용 설명서
The Vrabocry A550 amplifier operates by receiving a PWM control signal from your LED controller and amplifying both the signal and the power to drive longer lengths of LED strips. It does not have independent controls; its function is entirely dependent on the connected PWM LED controller.
- Once properly wired, power on your DC power supply.
- Operate your LED controller as usual. The amplifier will automatically repeat the signal, ensuring consistent brightness and color across all connected LED segments.
- When cascading multiple amplifiers, ensure each amplifier is powered by an independent power supply capable of handling its respective LED load.
4. 유지관리
수명과 최적의 성능을 보장하려면 amplifier의 경우 다음 유지 관리 지침을 따르세요.
- 청소: 유지하다 amplifier clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- 환경: Operate the device within its specified working temperature range of -20°C to 60°C. Avoid exposure to extreme temperatures, high humidity, or direct water contact.
- 통풍: 주변에 적절한 공기 흐름을 확보하세요. amplifier, especially if it is enclosed, to prevent overheating. The aluminum shell is designed for heat dissipation.
- 사이: 모든 배선 연결부를 주기적으로 점검하여 안전하고 부식되지 않았는지 확인하세요.
5. 문제 해결
문제가 발생하면 amplifier의 경우 다음 문제 해결 단계를 고려하세요.
- 정전/조명 없음:
- Verify that the power supply is correctly connected and providing the specified DC5-24V.
- Check all input and output wiring for correct polarity and secure connections.
- Ensure the LED controller is functioning correctly and sending a signal.
- Flickering Lights or Incorrect Colors:
- Confirm that the lead wires for each color channel (R, G, B, CW, WW) are correctly matched between the controller, amplifier, and LED strip.
- 느슨한 연결이나 손상된 전선이 없는지 확인하세요.
- Ensure the power supply is sufficient for the total load of the LED strips connected to the amplifier. An undersized power supply can cause flickering.
- Amp리파이어 과열:
- 에 대한 부하를 줄입니다. amplifier if it exceeds the maximum 50A.
- 확인하십시오 amplifier is in an area with adequate ventilation.
위 단계를 따른 후에도 문제가 지속되면 고객 지원팀에 문의하십시오.
6. 사양
| 모델 | A550 |
| 입력 Voltage | 직류5~24V |
| 최대 출력 전류 | 5 x 10A (Total 50A) |
| 채널 수 | 5 |
| 고속 | 1메가비트/초 |
| 작동 온도 | -20°C ~ 60°C |
| 재료 | 알류미늄 |
| 제품 크기(L x W x H) | 168mm x 82mm x 21mm |
| 패키지 치수(L x W x H) | 170mm x 85mm x 24mm |
7. 보증 정보
This product comes with a one-year warranty from the date of purchase. The warranty covers manufacturing defects under normal use. It does not cover damage resulting from:
- Artificial damage (e.g., physical impact, improper handling).
- Overload operation beyond the specified maximum current (50A total).
- Incorrect wiring or connection to an unsuitable power supply.
- 무단 수리 또는 개조.
보증 청구를 위해 구매 증명서를 보관하십시오.
8. 고객 지원
For technical assistance, warranty claims, or any questions regarding the Vrabocry A550 RGBCCT High Speed Amplifier, please contact your retailer or the manufacturer directly. Provide your product model number (A550) and a detailed description of the issue to facilitate support.
