소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Puig 21545H Road Touring Screen. Designed specifically for the Honda Rebel 1100T (models 2021-2024), this touring screen enhances aerodynamic protection and riding comfort by diverting frontal air currents. Please read these instructions carefully before proceeding with installation or use.
이미지 1: 앞면 view of the Honda Rebel 1100T with the Puig 21545H Road Touring Screen. This image illustrates the screen's appearance when mounted on the motorcycle, showcasing its smoke tint and overall profile.
설정 및 설치
Before beginning installation, ensure your motorcycle is parked on a stable, level surface and the engine is off and cool. It is recommended to have basic tools available, such as a hex key set or appropriate wrenches.
호환성 확인
This Puig Road Touring Screen (model 21545H) is compatible with Honda Rebel 1100T motorcycles from model years 2021 to 2024. Verify your motorcycle's model and year before proceeding.
설치 단계
- 준비: Carefully unpack the Puig Road Touring Screen and inspect it for any damage. Gather all necessary tools.
- 기존 구성 요소 제거:
- Locate and remove the 6 bolts securing the motorcycle's original batwing fairing. Set these bolts aside carefully.
- Once the batwing is removed, identify the 4 bolts holding the factory windshield in place. Remove these 4 bolts and detach the factory windshield.
- 새 화면 위치 지정: Align the Puig 21545H Road Touring Screen with the mounting points where the factory windshield was attached. Ensure the screen sits flush and correctly.
- 화면 보호: Using the appropriate hardware (typically the original bolts or new hardware provided by Puig, if any), secure the new touring screen to the motorcycle. Tighten the bolts evenly, but do not overtighten, to prevent damage to the screen or mounting points.
- Reinstall Batwing: Carefully reattach the batwing fairing, aligning it with its original mounting points. Secure it with the 6 bolts removed earlier. Ensure all bolts are tightened securely.
- 최종 확인: After installation, gently shake the screen to ensure it is firmly mounted and does not wobble. Check all bolts for proper tightness.
이미지 2: 사이드 프로file of the Honda Rebel 1100T featuring the Puig 21545H Road Touring Screen. This view highlights the screen's aerodynamic curve and how it integrates with the motorcycle's design.
Operating the Touring Screen
The Puig 21545H Road Touring Screen is designed to improve your riding experience by offering enhanced aerodynamic protection.
- Aerodynamic Protection: The screen's studied design, developed with wind tunnel technology, features an inclination closer to the rider. This effectively diverts frontal air currents that would otherwise impact the rider directly.
- Reduced Turbulence: By redirecting airflow, the screen helps eliminate annoying turbulence and vibrations around the helmet, contributing to a smoother and quieter ride.
- Increased Comfort: The improved airflow management significantly increases driving comfort and reduces rider fatigue, especially during longer journeys.
유지
Proper maintenance will ensure the longevity and clarity of your Puig Road Touring Screen.
- 청소: Clean the screen regularly using a soft cloth and mild soap with lukewarm water. Avoid abrasive cleaners, harsh chemicals, or rough sponges, as these can scratch the acrylic surface.
- 건조: Dry the screen with a clean, soft microfiber cloth to prevent water spots. Do not wipe a dry screen with a dry cloth, as this can cause static and attract dust, potentially leading to scratches.
- 점검: Periodically check all mounting bolts for tightness. Vibrations from riding can sometimes loosen fasteners. Ensure the screen remains securely attached.
- 손상: If the screen sustains significant damage (e.g., deep cracks or severe scratches), consider replacing it to maintain optimal visibility and structural integrity.
문제 해결
Screen Vibrations
If you experience vibrations from the screen during riding:
- Check Mounting Bolts: Ensure all installation bolts are securely tightened. Loose bolts are a common cause of vibrations.
- Add Rubber Dampeners: In some cases, adding small rubber washers or dampeners between the screen and the mounting points can help absorb vibrations. This may be necessary if the screen is directly mounted metal-to-plastic without any cushioning.
- 손상 여부 검사: Check the screen and its mounting hardware for any signs of damage or wear that could contribute to instability.
명세서
| 모델 번호 | 21545시간 |
| 상표 | 푸이 그 |
| 제품 유형 | Road Touring Screen |
| 재료 | High-quality CN Acrylic, 4 mm thick |
| 색상 | 연기 |
| 치수(제품) | 34.04 x 49.78 x 8.38cm(13.4 x 19.6 x 3.3인치) |
| 품목 무게 | 721.21g (1.59파운드) |
| 호환성 | Honda Rebel 1100T (2021-2024) |
| 특징 | Aerodynamic design, impact resistant, excellent transparency, rounded contour, TÜV approved. |
이미지 3: 위에서 아래로 view of the Honda Rebel 1100T cockpit with the Puig 21545H Road Touring Screen. This perspective shows the screen's integration with the handlebars and instrument cluster.
보증 및 지원
For specific warranty information or technical support regarding your Puig 21545H Road Touring Screen, please refer to the documentation provided with your purchase or contact Puig directly through their official web대지.
제조업체: 푸이 그
Web대지: www.puig.tv (Note: This is a generic placeholder. Please refer to the official Puig web귀하의 지역에 대한 사이트.)
